1. Catalogs
  2. Cavex Holland BV
  3. Cavex ImpreSafe disinfection protocol

Cavex ImpreSafe disinfection protocol

Cavex ImpreSafe disinfection protocol

Cavex ImpreSafe disinfection protocol

Product catalog summary
Introduction
This document outlines the disinfection protocol for Cavex ImpreSafe, a disinfectant used for dental impressions made of alginate, polyether, and silicone. The product is effective against bacteria, fungi, and viruses.
Specifications
  • Mixing Ratio: 30 ml of disinfectant per 1 liter of water.
  • Exposure Time: 3 minutes.
Procedure
  1. Fill the reservoir with water up to the indicated stripe (approximately 1 liter).
  2. Add 30 ml of disinfectant to the water.
  3. Immerse the dental impression into the fluid and disinfect for 3 minutes using a timer.
  4. After 3 minutes, remove the tray from the disinfectant fluid.
  5. Rinse the impression with water.
  6. Shake off excess water and place the impression in a plastic bag.
  7. Seal the bag airtight and mark it as "disinfected".
Recommendations
  • Always add water to the container before the disinfectant to prevent foaming.
  • Refresh the disinfectant fluid weekly or when it appears contaminated.
See more

Catalog excerpts

Cavex ImpreSafe disinfection protocol-1

protocol ImpreSafe GBD.qxd:GB•Leafletl Hygieneprod.qxd Cavex Holland BV P.O. Box 852 2003 RW Haarlem The Netherlands Cavex ImpreSafe disinfection protocol Bactericide, fungicide, virucide disinfectant suitable for disinfecting alginate, polyether and silicone impressions Mixing ratio: 30ml. disinfectant on 1 of liter water Exposure time: 3 minutes Squeeze bottle Lower impression into fluid. Disinfect for 3 minutes by using the timer. reservoir first, disinfectant fluid. up to indicated stripe (app. 1 liter). Pour disinfectant Rinse of with water. into reservoir. Place impression impression in a plastic bag. Seal airtight. Mark the bag as “disinfected”. TIP1: When filling the container, always put the water in first and then the disinfection fluid. This prevents foaming. CAVEXFOR DENTAL USE ONLY TIP2: Refresh the fluid every week or when the fluid looks

 Open the catalog to page 1
Cavex ImpreSafe disinfection protocol-2

protocol ImpreSafe GBD.qxd:GB•Leafletl Hygieneprod.qxd Cavex Holland BV P.O. Box 852 2003 RW Haarlem The Netherlands SYSTEM Cavex ImpreSafe - Protokoll zur Desinfektion Desinfektionsmittel - tötet Bakterien, Pilze und Viren zur Desinfektion von Alginat-, Polyäther- und Siliconabdrücken Mischungsverhältnis: 30 ml Desinfektionsmittel auf 1 Liter Wasser Kontaktzeit: 3 Minuten Flüssigkeit sinken. Mit Hilfe des Timers drei Minuten einwirken lassen. Sie diesen in einen Plastikbeutel. Verschließen Sie den Beutel luftdicht. Notieren Sie „desinfiziert“ auf den Beutel. TIPP1: Füllen Sie den Behälter immer...

 Open the catalog to page 2

All Cavex Holland BV catalogs and technical brochures

  1. Lab brochure

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.