Issue Date: 05/25/2015 Version No:1. Identification• Product identifier Trade name:Mimic Super Hydrophilic Vinyl Polysiloxane Impression Material (VPS), MIMIC Bite Registration Material ,MIMIC Putty, • Application of the substance or the preparation Addition curing vinyl polysiloxane dental impression materials (consisting of Base & Catalyst) • Manufacturer/Supplier• 3D Dental Design &Development LLC • 16871 Chagrrin Blvd. • 24HR Emergency Telephone numbers CHEMTREC (800)424-9300 The preparation of this document has been carried out according to the U.S. OSHA Hazard Communication Standard. Therefore, all the known hazards of the product or components has to be included regardless the potential risk.• Hazard classification Skin sensitizer: Category 1 • Label elements Signal word: Warning. Symbols: Exclamation mark. • Hazard statement May cause an allergic skin reaction. Causes severe eye irritation. • Precautionary statements Prevention: Wear protective gloves, protective clothing and eye protection. Work clothing which is contaminated must not be allowed out of workplace. Wash thoroughly after handling.

Issue Date: 05/25/2015 Version No:1 Response: IF ON SKIN: Wash with plenty of water and soap. In case skin irritation occurs, seek medical attention. Contaminated clothing must be washed before reuse. IF IN EYES: Rinse with caution with plenty of water for several minutes. In case contact lenses are worn remove and continue rinsing. If you feel unwell get medical attention. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/ international regulations. • Classification system NFPA ratings (scale 0 - 4) Health = 2 0 Fire = 0 HMIS ratings (scale 0 - 4)...

After ingestion Flush mouth with water and get medical attention. • Further information None5. Fire-fighting measures• Suitable extinguishing media Water spray, foam, carbon dioxide, dry chemicals depending on the materials involved in the fire. • Extinguishing media to avoid Not known.• Special hazards arising from combustion No relevant information is available for this product. • Special protective equipment for fire-fighters No special measures are required. • Personal precautions, protective equipment and emergency procedures Ventilate area. Avoid contact with skin and eyes. • Environmental...

MIMIC IMPRESSION MATERIAL/ PUTTY/ BITE REGISTRATION SAFETY DATA SHEET Issue Date: 05/25/2015 8. Exposure controls/personal protection Control parameters Occupational exposure limits

In case a component is shown in section 3 but it does not appear in the table below, there are not any available data for this component. ACGIH: American Conference of Government Industrial Hygienists OSHA: United States Department of Labour - Occupational Safety and Health Administration TWA: Time-Weighted-Average • Exposure control Personal protective equipment (PPE) Ventilation: Ensure adequate ventilation of the premises where the product is stored and/or handled. Respiratory protection: Not required. Hand protection: Suitable protective gloves may be worn. The use of vinyl gloves is suggested....

Boiling point: Not applicable Viscosity: No data available Reactivity No relevant information available. • Chemical stability Stable under normal storage and handle conditions. • Hazardous decomposition products None, if used in accordance with instructions. No relevant information available, if used in accordance with instructions. • Possibility of hazardous reactions None, if used in accordance with instructions It is required by the U.S. OSHA Hazard Communication Standard to include all the known hazards of the product or components included regardless the potential risk. All the information...

Aspiration hazard: In case a component is shown in section 3 but it does not appear here, there is not any available data for this component. If material is properly used and handled no ecological problems are to be anticipated Do not discard material into drains/sewers or aquatic environment Disposal must be carried out in accordance to the local and national regulations currently in force UN-Number None DOT, ADR, ADN, IMDG, IATA UN proper shipping name DOT, ADR, ADN, IMDG, IATA Transport hazard class DOT, ADR, ADN, IMDG, IATA Class Packing group DOT, ADR, IMDG, IATA Print date: 05/26/2015

MIMIC IMPRESSION MATERIAL/ PUTTY/ BITE REGISTRATION SAFETY DATA SHEET Issue Date: 05/25/2015 15. Regulatory information The product is not considered hazardous under D. Lgs. 65/03. The product is a medical device according to EC directive 93/42/EEC This product is classified as a medical device under US regulations and it has been reviewed by the US Food and Drug Administration (FDA) 16. Other information CAUTION: PRODUCT FOR PROFESIONAL USE ONLY The information provided above is based on our present knowledge and experience. This safety data sheet refers explicitly to the product indicated and...