Summary of Instrument and Component Listings for Cable Tensioner and Pelvic C-Clamp Systems

1. Cable Locks for Cable Tensioner (Back)

• Multiple cable lock variants specified by diameter: φ1.5, φ1.8, and φ2.0.
• Part numbers include 3781.12015 (φ1.5), 3781.12019 (φ1.8), and 3781.12016 (φ2.0).

2. Instrument Set Components

• C-Clamp Instrument Set: Essential for pelvic stabilization.
• Ratchet Wrench SW11: Part number 0282.08020, used for tightening and loosening components.
• Guide Wire φ2.5: Part number 0381.01014, used for guiding insertion tools.
• Extraction Forceps: Part number 3081.05015, for grasping and removing components.
• Wire Cutter: Part number 3781.13029, for cutting wires.
• Hammer φ11: Part number 4081.08001, used for impact application.
• Pelvic C-Clamp: Part number 4083.01010, main stabilization device.
• K-Wire Insertion Handle φ2.5: Part numbers 4083.01011 and 4083.01010, for inserting K-wires.
• Sleeves (long and short): Part numbers 4083.02010 (long) and 4083.02011 (short), used as guides or protective covers during insertion.

3. Part Number Cross-References and Redundancies

• Several part numbers are repeated, indicating standardization or common usage across different instrument sets.
• Some entries appear duplicated or partially illegible, suggesting the need for careful verification when ordering or assembling.

4. Key Recommendations and Best Practices

• Ensure correct matching of cable lock diameter to cable tensioner specifications to maintain system integrity.
• Use the specified ratchet wrench size (SW11) for optimal torque application.
• Verify part numbers carefully to avoid confusion due to similar or repeated listings.
• Maintain instrument cleanliness and inspect for wear, especially cutting and insertion tools, to ensure procedural safety and effectiveness.

Note: The document primarily lists components and part numbers related to cable tensioner and pelvic C-clamp instrumentation without detailed procedural or normative information.