1. Catalogs
  2. Chattanooga USA
  3. Montane  Table  LINE

Montane  Table  LINE

Montane  Table  LINE
1 / 33 PagesView full catalog

Montane  Table  LINE

Product catalog summary
Foreword
This manual is designed for owners and operators of the Montane Table Line, providing essential instructions for operation, safety precautions, and maintenance to ensure optimal efficiency and safety.
Product Description
The Montane Tables are intended for manual therapy and physiotherapy, featuring a boomerang mechanism base for smooth vertical lift and stability.
Precautions
Users must understand specific symbols indicating caution, warning, and danger to prevent injury or equipment damage. Key precautions include avoiding electromagnetic interference, maintaining proper environmental conditions, and adhering to weight limits.
Design and Function
The tables come with various components and accessories specific to the Montane Table Line. Only compatible accessories should be used to avoid increased emissions or decreased immunity.
Specifications
Detailed specifications for each table model include dimensions and functionality of articulating sections.
Technical Specifications
Information on electromagnetic compatibility and guidelines for minimizing interference with other devices is provided.
Setup
Instructions for unpacking and assembling the table ensure all components are present and correctly installed.
Operation
Guidelines for safely relocating, adjusting, and operating the table, including locking casters and supporting table sections during adjustments.
Maintenance
Regular maintenance includes cleaning upholstery, lubricating points, checking gas springs, and ensuring electrical safety. Disconnect the table from power before maintenance.
Warranty
Details on warranty coverage and conditions emphasize the importance of proper use and maintenance to avoid voiding the warranty.
Overview
The document provides detailed specifications, components, and operational guidelines for the Montane Table Line, designed for various medical applications with adjustable sections and height for patient comfort and practitioner convenience.
Specifications
  • Dimensions: Tables range from 201 cm (79 in) to 120 cm (47 in) in length and approximately 69 cm (27 in) in width.
  • Weight and Capacity: Each table weighs around 110 kg (242 lbs) and supports up to 150 kg (330 lbs).
  • Electrical Specifications: Operates on 100V, 120V, or 230V with a frequency of 50/60 Hz. The duty cycle is 2 minutes "on" and 18 minutes "off".
  • Safety and Compliance: Classified as Class II equipment with Type B applied parts, meeting various international safety standards.
Components and Features
  • Frame: Made of welded steel sections with powder paint coating, featuring a bottom frame with foot-operated height adjustment and an upper frame with an electric actuator.
  • Table Top: Adjustable for elevation and depression angles in head, chest, and foot sections, depending on the model.
  • Accessories: Includes a breathing hole in the head section and rails for stabilizing belts in the foot sections.
Operational Guidelines
  • Setup: Requires a minimum of two people for lifting and positioning. Ensure 80 cm (31.5 inches) clearance on all sides.
  • Power Supply: Connect to a suitable power source (230 VAC/50 Hz, 120 VAC/60 Hz, 100 VAC/60 Hz) and ensure the cable is protected from pinch points.
  • Relocation: Tables with 2 wheels/2 legs can be moved by lifting the headrest side. Tables with 4 casters include a foot lever for switching between work and transport modes.
Technical Specifications
  • Electromagnetic Compatibility: Complies with IEC standards for emissions and immunity, suitable for use in various environments including domestic settings.
  • Environmental Conditions: Operational temperature range is +10°C to +40°C with specific humidity and air pressure requirements.
Warnings and Cautions
  • Do not transport patients on the table.
  • Ensure the table is unplugged during maintenance.
  • Avoid using the table in high humidity environments.
Operation and Adjustment
The Montane Table can be adjusted for height using a foot controller. The table will continue to rise or fall as long as the controller is held in position. The actuator automatically switches off at the table's minimum or maximum height. To adjust the elevation angle of the table sections, disengage the gas spring lock, set the desired position, and re-engage the lock. Ensure the patient is removed before making adjustments, and avoid placing hands or feet near moving parts to prevent injury.
Postural Drainage Adjustment
Use the Postural Drainage Switch to adjust the Chest and Back Sections. Remove bolsters from mounting holes before using this function.
Maintenance and Cleaning
Regular cleaning of the upholstery with warm water and mild detergent is recommended. Avoid using abrasive cleaners, strong detergents, or solvents. Disinfect surfaces with a mild antibacterial detergent. Lubricate movable joints every six months and check threaded joints periodically. Perform an electrical safety check as per local requirements.
Warranty
The Montane Tables come with a two-year warranty for cushions and a three-year warranty for the base frame and motor. Repairs must be performed by certified service centers. The warranty does not cover unauthorized repairs or misuse of the product.
Service and Contact
For service, warranty, or repair, contact the selling dealer or DJO Customer Service. The product should be disposed of or recycled according to the EU Directive on Waste Electrical and Electronic Equipment (WEEE).
See more

Catalog excerpts

Montane  Table  LINE-1

Montane  Table  LINE Moving Rehabilitation Forward™ User Manual 2 SECTION TABLES EXAMINATION TABLES 3590 Dolomites 2 Section 120V Examination 3591 Dolomites 2 Section 120V Examination 3592 Dolomites 2 Section 230V Examination 3593 Dolomites 2 Section 230V Examination bobath TABLES

 Open the catalog to page 1
Montane  Table  LINE-2

TABLE OF CONTENTS 1. FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Electromagnetic Compatibility Tables . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3. MONTANE TABLE LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Tatras 2 Section Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Atlas 3 Section Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Alps 5 Section Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

 Open the catalog to page 2
Montane  Table  LINE-3

Montane Table Line This manual has been written for the owners and operators of the Montane Table Line. It contains general instructions for operation, precautionary instructions, and maintenance recommendations. In order to obtain maximum life and efficiency from your Montane Table, and to assist in the proper operation of the unit, read and understand this manual thoroughly. The specifications put forth in this manual were in effect at the time of the publication. However, owing to DJO, LLC’s policy of continuous improvement, changes to these specifications may be made at any time without obligation...

 Open the catalog to page 3
Montane  Table  LINE-4

Montane Table Line Precautionary INSTRUCTIONS The precautionary instructions found in this section and throughout this manual are indicated by specific symbols. Understand these symbols and their definitions before operating this equipment. The definitions of these symbols are as follows: biohazard Text with a “BIOHAZARD" indicator will explain possible safety infractions that could cause bio-hazardous conditions if the table is not properly cleaned after each use. CAUTION CAUTION Text with a “CAUTION” indicator will explain possible safety infractions that could have the potential to cause minor...

 Open the catalog to page 4
Montane  Table  LINE-5

Montane Table Line CAUTION • Do not transport the table over rough or outdoor surfaces. The retractable caster system could become damaged and inoperable. • Inspect cables, connectors and casters before each use. • A licensed practitioner must be familiar with all instructions contained in this manual before administering therapy. • Read, understand, and practice the precautionary and operating instructions found in this manual. Know the limitations and hazards associated with your treatment table. Observe any and all precautionary and operational decals placed on the unit. • DO NOT operate this...

 Open the catalog to page 5
Montane  Table  LINE-6

Montane Table Line WARNING • On rare occasions, use of the table can result in transient skin reactions such as rash, inflammation or irritation. These skin reactions may be the result of individual sensitivity to the mild antibacterial cleaning materials used on the table or the material of the table cushions. Advise the patient of this possibility before starting treatment. If a visible skin reaction does occur, discontinue patient treatment and consult the prescribing physician. • Should the Montane Table Mains Power Cord become frayed/damaged or if a caster is broken, immediately stop use...

 Open the catalog to page 6
Montane  Table  LINE-7

SAFETY PRECAUTIONS Montane Table Line Do not put a load on the head and foot sections as shown below. Do not overload Montane Table. Patient weight may not exceed 150 kg. In case the electrical system or the actuator cover comes in contact with liquid of any kind, immediately pull the power supply plug out of the mains socket and contact the manufacturer’s service department. Protect electrical systems from contact with liquids (e.g. beverages, water, cleaning and disinfection preparations). Do not sit on the movable elements of the head and chest sections!

 Open the catalog to page 7
Montane  Table  LINE-8

SAFETY PRECAUTIONS Montane Table Line CAUTION Do not lower the table with its front section folded down! Lowering the table to the lowest possible position while its head section is deflected or in the down position may cause a collision between the head section and the lower frame elements. This can result in blocking the height adjustment mechanism. Permanent and irreversible damage to the structure of the table may occur! The manufacturer shall not assume liability for damages resulting from improper (not compliant with conditions provided in this Operation Manual) use of the Montane Table...

 Open the catalog to page 8
Montane  Table  LINE-9

MONTANE TABLE LINE Montane Table Line tatras 2 section table FOOT SECTION HEAD SECTION HEAD REST RELEASE HANDLE LEG CASTER UP / DOWN CONTROL BAR

 Open the catalog to page 9
Montane  Table  LINE-10

MONTANE TABLE LINE Montane Table Line atlas 3 section table 69 cm (27.2 in) POSTURAL DRAIN SWITCH FOOT SECTION CHEST SECTION 54 cm (21.3 in) FOOT SECTION ELEVATION HANDLE HEAD REST RELEASE HANDLE

 Open the catalog to page 10
Montane  Table  LINE-11

MONTANE TABLE LINE Montane Table Line alps 5 section table 69 cm (27.2 in) FOOT SECTION HEAD REST RELEASE HANDLE CHEST SECTION HEAD SECTION FOOT SECTION ELEVATION HANDLE HEAD REST RELEASE HANDLE

 Open the catalog to page 11
Montane  Table  LINE-12

MONTANE TABLE LINE Montane Table Line andes 7 section table 69 cm (27.2 in) CHEST SECTION FOOT SECTION POSTURAL DRAIN SWITCH SHOULDER WING 54 cm (21.3 in) HEAD SECTION FOOT SECTION ELEVATION HANDLE 101 cm (39.8 in) HEAD REST RELEASE HANDLE LEG

 Open the catalog to page 12
Montane  Table  LINE-13

MONTANE TABLE LINE Montane Table Line DOLOMITES 2 section EXAMINATION table HEAD SECTION SIDE RAILINGS FOOT SECTION PAPER TOWEL HOLDER HEAD REST RELEASE HANDLE

 Open the catalog to page 13
Montane  Table  LINE-14

MONTANE TABLE LINE Montane Table Line TAURUS 1 section BOBATH table

 Open the catalog to page 14
Montane  Table  LINE-15

MONTANE TABLE LINE Montane Table Line TAURUS 2 section BOBATH table HEAD SECTION HEAD REST RELEASE HANDLE FOOT SECTION

 Open the catalog to page 15
Montane  Table  LINE-16

Montane Table Line COMPONENTS OF THE MONTANE TABLE The frame of the table is made of welded steel sections coated with powder paint. It includes the following components: 4 1. Bottom Frame—A support base for the whole unit with a foot-operated height adjustment switch assembly – 4 Wheels: With four legs and four casters lifted by means of a foot-operated lever 2. Upper Frame—A base for the table top, with an electric actuator for height adjustment 3. – 2 Wheels/2 Legs: With two small wheels and two legs Table Top—Allows patients to assume comfortable position for the treatment with the possibility...

 Open the catalog to page 16

All Chattanooga USA catalogs and technical brochures

  1. Mobile 2 RPW

    4  Pages

  2. Chatt-Tape

    4  Pages

Archived catalogs

  1. Moveo XP

    5  Pages

  2. primera

    2  Pages

  3. Hot and Cold

    12  Pages

  4. Iontophoresis

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.