Pulley Therapy
30Pages

{{requestButtons}}

Catalog excerpts

Pulley Therapy - 1

CHINESPORT GENERAL CATALOGUE - EDITION 2013 Pulley Therapy 128 Introduction 130 Fixed and Self-supporting Frames 136 Configuration Options 140 Straps and Other Tools 148 Ercolina & Poliercolina 150 R.I.C. Method and Frames

Open the catalog to page 1
Pulley Therapy - 2

Archimedes Pulley Therapy System This is an open pulley therapy system that offers a variety of different types of exercises to meet the requirements of both professionals and patients. It consists of modular frames that adapt to any operational needs and available space, a series of harnesses for the body regions and a number of other tools to complete the required equipment. This system allows creativity in defining specific rehabilitation programs. Below are some exercise suggestions - please note these are not meant to be a full and comprehensive selection. SPIRAL PATTERN FOR...

Open the catalog to page 2
Pulley Therapy - 3

Certificazione richiesta dalla Comunità Europea e riconosciuta a livello Internazionale 1) METAL FRAMES The pulley therapy metal frame system is modular, wide and flexible to meet the professional’s requirements depending on available space and type of exercises to develop. This means that options range from fixed wall or ceiling frames to freestanding frames with two or more support planes. In addition, each work station proposed in its standard configuration can be supplemented by various types of side grids or reinforcement details to increase the safe working load at any time, whether...

Open the catalog to page 3
Pulley Therapy - 4

Archimedes System Fixed Wall Frames FRAME 1 This is a smaller frame to be fitted to the wall either horizontally or vertically. It consists of two 70 cm long, coated metal tubular elements and a high-strength steel grid with scratch-resistant plastic coating and dimensions 93.3 x 60.5 x h 7.1 cm. The grid has a diameter of 5 mm and mesh is 5 x 5 cm. Dimensions: 103.5 x 71 x h 7.5 cm Weight: 9 kg Note: FRAME 1 can be fitted to the wall at the desired height both horizontally and vertically. FRAME 2 This frame can be fitted to the wall either horizontally or vertically. It consists of two 200...

Open the catalog to page 4
Pulley Therapy - 5

Fixed Ceiling Frames FRAME 4 This is a smaller frame to be fitted to the ceiling. It consists of four angle brackets made from coated metal, one FRAME 1 - ref. code AR11001, and two reinforcing crossbar elements. Again, the grid is made from high-strength steel with scratch-resistant plastic coating and dimensions are 93.3 x 60.5 x h 7.1 cm. Angle brackets allow for adjusting the grid distance from the ceiling from 59.7 cm to 107.7 cm by 4 cm steps. The stated capacity is dependent on the wall elements strength. Dimensions: 113 x 84.5 x h 59.7-107.7 cm Weight: 31 kg FRAME 5 This frame is...

Open the catalog to page 5
Pulley Therapy - 6

Archimedes System FRAME 6 This is an exercise frame on two planes, to be fitted to the wall. It consists of four 200 cm long, coated metal tubular elements, three high-strength steel grids at the top and other connecting and attaching elements, always made from coated metal. Also, grids have a scratch-resistant plastic coating; dimensions are 93.3 x 60.5 x h 7.1 cm. The overall work area on the top level is about 190 x 93.3 cm. The frame can be upgraded on its vertical side by fitting up to 3 STANDARD GRIDS - ref. code AR11A01 or QUICK FIT GRIDS - ref. code AR11A02. For further details,...

Open the catalog to page 6
Pulley Therapy - 7

CONFIGURATION EXAMPLE N. 2 The L-frame shown here consists of the following elements: n. 1 PIECE AR11006 - FRAME 6 n. 2 PIECES AR11A01 - STANDARD GRID This type of frame is recommended whenever there is limited operational space that needs to be optimized. Note: Upon placing a purchase order for this type of configuration, please specify the codes and quantities as indicated above. CONFIGURATION EXAMPLE N. 3 The solution proposed here is created from the following main frames plus additional standard grids, starting from the basic setting: n. 1 PIECE AR11006 - FRAME 6 n. 2 PIECES AR11002 -...

Open the catalog to page 7
Pulley Therapy - 8

Archimedes System FRAME 8 This is a free-standing and self-supporting exercise frame on three planes. It consists of six 200 cm long painted metal tubular elements, three highstrength steel grids at the top and other connecting and attaching elements, always made from painted metal. Also, grids have a scratch-resistant plastic coating; dimensions are 93.3 x 60.5 x h 7.1 cm. The overall work area on the top level is about 190 x 93.3 cm. The frame can be upgraded on its vertical side by fitting up to 6 STANDARD GRIDS - ref. code AR11A01 or QUICK FIT GRIDS - ref. code AR11A02. For further...

Open the catalog to page 8
Pulley Therapy - 9

Self-supporting frames with 4 sides FRAME 10 This is a free-standing and self-supporting exercise frame on four planes. It consists of twelve 200 cm long, coated metal tubular elements, six highstrength steel grids at the top and other connecting and attaching elements, always made from coated metal. Also, grids have a scratch-resistant plastic coating; dimensions are 93.3 x 60.5 x h 7.1 cm. The overall work area on the top level is about 190 x 206.6 cm. The frame can be upgraded on its vertical sides by fitting up to 18 STANDARD GRIDS - ref. code AR11A01 or QUICK FIT GRIDS - ref. code...

Open the catalog to page 9
Pulley Therapy - 10

Archimedes System Configuration Options STANDARD GRID The grid is made from high-strength steel 5 mm diameter bar mesh with scratch-resistant plastic coating and 5 x 5 cm mesh. It can be easily fitted to any frame configured with the specific hardware supplied as standard. Fixed wall or ceiling frames or frames with two or more work planes, either attached to the wall or self-supporting, already use this type of grid as a standard configuration for upper horizontal planes and only for this type of grids, thus ensuring the stated safe working loads. More grids can be ordered to upgrade the...

Open the catalog to page 10
Pulley Therapy - 11

Configuration Options GRID REINFORCEMENT SET It is an assembly of four elements that are attached to the frame on the top horizontal plane so exercises - or more general activities - can be performed with greater safe working loads than those stated as standard. If needs be, the professional may request one or two of these reinforcement sets - depending on whether the frame is single or double - either at the time of ordering or at a later time. The group of elements is supplied along with specific hardware so they are secured to the main frame. Please refer to the presentation on the frame...

Open the catalog to page 11

All Chinesport catalogs and technical brochures

  1. Pulley therapy

    30 Pages

Archived catalogs

  1. LIGHT CHAIR

    1 Pages

  2. VOD 56

    2 Pages

  3. FISIOTEK HP2

    4 Pages

  4. FISIOTEK LT

    4 Pages

  5. TENS eco 2

    2 Pages

  6. 11_Tractions

    16 Pages

  7. RELAX CHAIRS .

    10 Pages

  8. Diagnostics

    22 Pages

  9. hydrotherapy

    10 Pages

  10. Traction

    16 Pages

  11. Treadmills

    10 Pages

  12. Walking Aids

    12 Pages

  13. Therapy tables

    48 Pages

  14. REHABILITATION

    42 Pages

  15. Tilt

    12 Pages