CHINESPORT GENERAL CATALOGUE - EDITION 2013 Tilt Tables 224 Introduction 225 Accessories and Upholstery 226 Tilt Tables for Static Exercises in Supine Position 229 Tilt Tables for Static Exercises and Physical Therapy 230 Tilt Table for Static Exsercise in Prone Position 232 Bobath Table for Static Exercises and Physical Therapy 234 Summary table

Introduction Within a motor, strength and balance re-education programme, these tilt tables help to gradually reach an erect posture from a static prone or supine position when patients are unable to load their own body weight on their lower limbs. The tilt adjustment can be either servo-assisted by gas springs, or electrical through wall power supply or battery-operated. Some models also provide for the table to be height-adjusted, should it need to be used for physical therapy sessions. Available motors for lift & tilt allow for different safe working loads, for example up to 140 kg or 180...

ACCESSORIES Some accessories are the same for all models, while others are for specific applications. However, they can still be ordered along with the table or at a later time. Note: A summary table at the end of this section provides a detailed illustration of how any potential accessories can be combined with each model. Once fitted to the footplates, they restrain and stabilise the feet. Can be adjusted into intra-extra rotation and anteroposterior rotation. (2 pieces) Side supports made from soft material, adjustable in height, width and depth. (2 pieces) INTRA-EXTRA SANDALS TRUNK SUPPORTS...

Tilt Tables for Static Exercises in Supine Position lt3g33.W Tilt table g Single-section tilt table for static exercises in supine position for up to 120 kg. Up to 85° tilt via two-gas spring servo-assisted system. Lifting takes place in a continuous movement and with minimal effort for the carer, while the user is on board. It is fitted with tilt angle indicator; height from ground is 85 cm. Two straps are provided for patient restraint. It can be moved with a mobile lift or medical equipment trolley, clearance under the table base is 17 cm. Transport is made easier by the wide diameter, braked...

Tilt Tables for Static Exercises in Supine Position Three-section tilt table for static exercises in supine position for up to 140 kg. Up to 85° tilt with wall power supply, 24V low voltage, and operated by hand control. It is fitted with tilt angle indicator; height from ground is 56 cm. Two patient restraining straps are provided. A central guide between the two lower limbs support sections allows for the restraining strap to be better fitted and secured. Transport is made easier by the wide diameter, braked casters, one of them being directional. Footplates can be independently adjusted by...

Tilt Tables for Static Exercises in Supine Position lt1e12.W Tilt table et Four-section tilt table for static exercises in supine position for up to 140 kg. Up to 85° tilt with wall power supply, 24V low voltage, and operated by hand control. It is fitted with tilt angle indicator; height from ground is 56 cm. Head end section can be adjusted up/down by gas spring. Two patient restraining straps are included. A central guide between the two lower limbs support sections allows for the restraining strap to be better fitted and secured. Transport is made easier by the wide diameter, braked casters,...

Tilt Tables for Static Exercises and Physical Therapy Four-section tilt table for supine position static exercises, examination and physical therapy for up to 140 kg. Can be adjusted in height and tilt up to 85°, with wall power supply, 24V low voltage, and operated by hand control. It is fitted with tilt angle indicator; height from ground is 56 cm. Head end section can be adjusted up/down by gas spring. Two patient restraining straps are included. A central guide between the two lower limbs support sections allows for the restraining strap to be better fitted and secured. Transport is made...

Tilt Table for Static Exercise in Prone Position LT1E14.W TILT TABLE E PRO Four-section tilt table for static exercises in prone position for up to 140 kg. Up to 85° tilt with wall power supply, 24V low voltage, and operated by hand control. It is fitted with tilt angle indicator; minimum height from ground is 56 cm. The trunk support section is height-adjustable. Two patient restraining straps are included. A central guide between the two lower limbs support sections allows for the restraining strap to be better fitted and secured by means of accessory AC0312. It is also possible to fit the...

Tilt Table for Static Exercise in Prone Position Fitting the “head end section for use in Height-adjustable “Leg separator” supine static exercises” - Accessory AC0310 – Accessory AC0311 “Separator” can be easily slotted into the central arrangement Lower limbs restraint with “strap guide” – Accessory AC0312

Bobath Table for Static Exercises and Physical Therapy LB492F2x Tilt table BOBATH 2Et Two-section Bobath table for treatment and static exercises in supine position. Height-adjustable up to 250 kg (safe load), or tilt adjustable from 0° to 85° up to 190 kg, with wall power supply, 24V low voltage, and operated by hand control. It is fitted with tilt angle indicator; minimum height from ground is 55 cm. Two patient restraining straps are included. Head end section can be adjusted up/down by gas spring; it is also provided with breathing hole plug. A central arrangement between the lower limbs...

Bobath Table for Static Exercises and Physical Therapy Fitting the footplate assembly for use with static exercises in supine position. SOME ACCESSORY APPLICATION EXAMPLES Removable footplate assembly Foot restraining sandals accessory AC0002 (2 pieces) Strap guide accessory AC0312 (single piece) Lateral trunk supports accessory AC0003 (2 pieces) Forearm supports accessory AC0004 (2 pieces) Leg separator accessory AC0311 (single piece) Work table for static exercises in supine position accessory AC0308 (single piece)