LASER CUT
LASER CUT
The document provides technical specifications and features of the Nitrogen Generator designed for laser cutting and other applications. It highlights the generator's ability to deliver nitrogen at high pressures with varying purities and includes details on its operational capabilities and specifications.
Features
- Integrated booster delivering nitrogen at 200 or 300 bar.
- Purity levels range from 99.99% to 99.999%.
- Two outlets for low and high pressure.
- On-board oxygen analyzer for controlled high purity.
- Remote connection via PLC.
Applications
The generator is suitable for laser cutting, plastic injection molding, and cylinder filling.
Models and Production Capacity
- Various models (LASER CUT 225-1, 225-2, 225-3, 450-2, 450-3, 450-4) with different production capacities ranging from 9 to 33 Nm³/h.
- Air consumption varies by model, with detailed specifications provided for hourly, daily, and monthly production.
Operating Specifications
- Electrical power: 400V 3ph+N50 Hz.
- Motor power: 7.5 kW for 225 models, 15 kW for 450 models.
- Noise level: ≤ 65 dB.
- Operating temperature: 5 to 40°C.
Nitrogen Specifications
- Working pressure: 195 or 290 bar.
- Humidity: DP -50°C ATP.
Inlet Air Specifications
- Air pressure: min 7.5 / max 12.5 bar.
- Dew point: +3°C.
- Max oil content: < 0.01 mg/m³.
- Max particle content: < 0.1 mg/m³.
Dimensions and Weight
- Dimensions and weight vary by model, with detailed measurements provided.
Contact Information
CLAIND Srl, Via Regina 24, 22016 Tremezzina, Loc. Lenno (CO), Italy. Tel: +39 0344 56603, Email: [email protected], Website: www.claind.it
Catalog excerpts
LASER CUT “The solution for cutting assist gas” Nitrogen generato
Open the catalog to page 1
FEATURES • Nitrogen generator with integrated booster, which delivers nitrogen at 200 or 300 bar • Available with purities ranging from 99,99% to 99,999% • Two different outlets: low and high pressure • Controlled high purity: an on-board oxygen analyzer guarantees purity of the gas produced at any time • Remote connection option: thanks to the presence of a PLC APPLICATIONS Laser cutting, plastic injection moulding, cylinders filling LASER CUT FLOW RATE IN Nm3/h NITROGEN AND AIR * Referred to standard setting 8,5 bar air input, 100 ppm purity. For different conditions apply below correction...
Open the catalog to page 2
TECHNICAL SPECIFICATIONS PURITY CORRECTION FACTORS & AIR CONSUMPTION OPERATING SPECIFICATIONS • ELECTRICAL power: 400V 3ph+N50 Hz • Motor power: - models 225, 7,5 kW - models 450, 15kW • Noise level < 65 dB • Operating temperature: 5^40°C NITROGEN SPECIFICATIONS Working pressure: 195 or 290 bar Humudity: DP -50°C ATP Air pressure : min 7,5 / max 12,5 bar Dew point : +3°C Max oil content: < 0,01 mg/m3 Max particle content: < 0,1 mg/m3 DIMENSIONS MODELS Width Depth CLAIND Srl - Via Regina 24 22016 Tremezzina - Loc. Lenno (CO) Italy Tel. +39 0344 56603 Fax +39 0344 56627 e-mail: [email protected] www.claind.it...
Open the catalog to page 3
Via Regina 24 22016 Tremezzina Loc. Lenno (CO) Italy Tel. +39 0344 56603 Fax +39 0344 56627 Email: [email protected] Sitoweb: www.claind.it
Open the catalog to page 4All Claind catalogs and technical brochures
NIGEN GC4 Pages
TIVANO4 Pages
N2 MAXI4 Pages
N2 PICO4 Pages
N2 FLO4 Pages
IND EN16 Pages
FOOD EN16 Pages
ANALYTICAL EN20 Pages
Laser Cutting8 Pages
- Dry air compressor
- Hospital compressor
- Reciprocating air compressor
- 1-workstation compressor
- Compressor with air dryer
- Laboratory nitrogen generator
- Silent compressor
- PSA nitrogen generator
- Hydrogen generator
- Air generator
- High-purity nitrogen generator
- Scroll compressor
- LC/MS nitrogen generator
- Container air compressor
- Laboratory hydrogen generator
- Floor-standing nitrogen generator
- Nitrogen generator with touch screen
- Laboratory air generator
- High-purity hydrogen generator