Series 112 Motorized Ceiling Fan Filter Unit Shown with optional 10 in. side inlet The Series 112 is a fan filter unit (FFU), or it is sometimes called a MCF (motorized ceiling filter). This fan filter unit is a self-contained filter unit that draws air in through a top-mounted prefilter. It then blows the air out the other side through a HEPA or ULPA filter into a controlled space. A typical application is installing it into a 2 ft. x 4 ft. ceiling grid system, however, fan filter units can also be mounted on a support frame or suspended from a support structure. The galvanized steel blower housing screws to the top of an aluminumframed HEPA or ULPA filter. The internal direct drive blower/motor assembly is isolated from the exterior housing by torsion flex motor mounts and rubber vibration isolation mounts. Internal acoustical foam baffles reduce sound and enhance airflow uniformity. Motorized Ceiling Fan Filter Unit Features v Self-contained design v Lightweight v All-metal filter housing v Easily installs into a 2 ft. x 4 ft. ceiling grid system v Standard unit ships with a HEPA filter and prefilter v Internal acoustical foam baffles for reduced sound v listed UL v Operates at low, medium, and high speeds 8 For more information or to download or fax this product from the web, simply go to: www.cleanairproducts.com/112

Series 112 Motorized Ceiling Fan Filter Unit The standard Series 112 fan filter unit is shipped with a HEPA filter, a clear anodized aluminum frame, and an integral white-painted expandedmetal grill on its face. The standard unit is tested with polystyrene beads. The prefilter installs on the top of the fan filter unit and is changed without the use of tools. The standard unit ships with a 20 in. x 20 in. x 1 in. craft board framed fiberglass prefilter. The unit is designed to accept a 20 in. x 20 in. x 4 in. pleated filter for applications where a higher degree of prefiltering is required. The...