Table Top Laminar Flow Work Stations Designing Flexible Solutions General Information A self contained SAM Fan Filter Unit provides Class 100 HEPA filtered air in a vertical laminar flow pattern within the workspace. Electrical Standard voltage is 115 volts with other voltage options shown on a following page. An On/Off switch is installed on the SAM unit. All 115 volt models are equipped with a 8 foot power cord and 3 - prong plug. Other voltages require electrical connection to the power source by a qualified electrician. Final Filter HEPA filters are 99.99% efficient @ 0.3 micron or larger with anodized aluminum frame. ULPA grade filters are 99.9995% efficient @ 0.12 micron, and are available as an option. Prefilter A pleated type, disposable prefilter rated at 30% ASHRAE efficiency is standard. Speed Control A solid state variable speed control is mounted on the SAM unit. Grille Table Top Laminar Flow Workstations with lights have an acrylic grille inserted in an anodized aluminum frame which is hinged to open. This permits access to the fluorescent light tubes and removal of the HEPA filter without removing the SAM unit from the frame. Workstations without lights have a painted white epoxy diamond pattern grille. Construction Table Top Laminar Flow Workstation frames are white painted steel tubing with clear acrylic side and back panels and adjustable leg levelers. Workstations are designed to be placed on a table or other suitable work surface. Lighting All 2’, 4’, & 8’ laminar flow models with lights are equipped with a 4-lamp light fixture, 120 volt, 60 hz with T8, 32W electronic ballast. The 6’ laminar flow models are equipped with a 2-lamp fixture, 120V, 60 hz., T12 ballast and two (2) high output lamps. Fluorescent light tubes are not furnished with the units because of potential breakage during shipment. Shipping Workstations are fully assembled with the SAM unit packaged separately for safe shipping. The self contained SAM unit is easily installed in the frame on site with no special tools required. See a following page for options and ordering information. SAM is a registered trademark owned by Clean Rooms International Dec/2013 Phone: 616-452-8700 * Fax: 616- 452-2372 Email: sales@cleanro

Table Top Laminar Flow Work Stations Designing Flexible Solutions SAM 24 MicroSound w/Lights Clear Acrylic Side and Back Panels Welded Steel Frame with White Powdercoat Finish Leg Levelers Ordering Information Table Top Laminar Flow Work Stations w/Lights Model No. Overall Dimensions Opening Size NOTE: Fluorescent light tubes not included Custom sizes and designs ULPA Filter 99.9995% eff @ 0.12 micron or larger Refer to following pages for more options 710 Phone: 616-452-8700 * Fax: 616- 452-2372 Email: sales@cleanroomsin