E Series Horizontal Flow Clean Benches
2Pages

{{requestButtons}}

Catalog excerpts

E Series Horizontal Flow Clean Benches - 1

E Series Horizontal Flow Clean Benches Designing Flexible Solutions General Information A self contained SAM Fan Filter Unit provides Class 100 HEPA filtered air in a horizontal laminar flow pattern within the workspace. Electrical Standard voltage is 115 volts with other voltage options available. Separate On/Off switches for the fan and lights are located above the workspace. All 115 volt models are equipped with a 8 foot power cord and 3 - prong plug. Other voltages require electrical connection to the power source by a qualified electrician. Final Filter HEPA filters are 99.99% efficient @ 0.3 micron or larger with anodized aluminum frame. ULPA grade filters are 99.9995% efficient @ 0.12 micron, and are available as an option. Prefilter A pleated type, disposable prefilter rated at 30% ASHRAE efficiency is standard. Speed Control A solid state variable speed control is mounted on the SAM unit. Grille Horizontal flow clean benches have a polystyrene grille inserted in an anodized aluminum frame which is hinged to open. This permits removal of the HEPA filter without removing the SAM unit from the frame. Construction Clean Bench frames are white painted steel tubing with clear acrylic side panels and adjustable leg levelers. Work surfaces are solid core with white high pressure laminate finish. ESD, perforated and stainless steel work surfaces are available as options. Clean Bench models are available in a sit-down style with work surface 30” from floor or stand-up style with work surface 40” from floor. Lighting All horizontal flow models with lights are equipped with a 4-lamp light fixture, 120 volt, 60 hz with T8, 32W electronic ballast. Fluorescent light tubes are not furnished with the units because of potential breakage during shipment. Shipping Horizontal Flow Clean Benches are fully assembled. Options See a following page for options and ordering information. SAM is a registered trademark owned by Clean Rooms International July/2007 Phone: 616-452-8700 * Fax: 616- 452-2372 Email: sales@cleanroom

Open the catalog to page 1
E Series Horizontal Flow Clean Benches - 2

E Series Horizontal Flow Clean Benches Designing Flexible Solutions Fluorescent Light Fixtures Clear Acrylic Side and Back Panels White, LPL Work Surface Welded Steel Frame with White Powdercoat Finish Ordering Information Sit-down Style Horizontal Flow w/Lights and Work Surface 30” from Floor Model No. Work Surface Overall Dimensions Opening Size NOTE: Fluorescent light tubes not included Ordering Information Stand-up Style Horizontal Flow w/Lights and Work Surface 40” from Floor Model No. Work Surface Overall Dimensions Opening Size NOTE: Fluorescent light tubes not included Casters with...

Open the catalog to page 2

All Clean Rooms International catalogs and technical brochures