Connected
2Pages

Ovulation Test Read this leaflet carefully before testing 1 How to use the Clearblue Connected app Do I need my phone to test? No. Test normally following the instructions from step 3. The holder will display a flashing asterisk to show data is available to sync. When Bluetooth® on your holder and phone is turned on and the app is open, the result will sync. To turn on Bluetooth® on your holder insert the wake up stick and wait for the Bluetooth® symbol to appear. My result hasn’t been synced to the app and it’s no longer on the holder display. What should I do? If your test stick is still inserted into the holder eject it and the result will re-appear on the display. Whilst it is displayed, Bluetooth® will be activated and your result will sync to the app if your phone has Bluetooth® turned on and the app is open. If you have ejected the test stick and the result is no longer displayed you need to insert the wake-up stick to activate Bluetooth®. Your result will then be synced to the app if your phone has Bluetooth® turned on and the app is open. Eject the wake-up stick once your result has been synced. Where is my information stored? Synced results and information you have entered on the app are stored on your phone. When you are connected to the internet all your information is also transferred to your personal account. This is a secure and confidential area so it’s a good idea to keep your personal account updated in case you lose or change your phone. You can check when this was last done by going to Menu. How does the app know the day my period is due? The app will estimate when your period is due based on the information you have provided on your cycle length and last period. Can I connect more than one holder? No, you can only connect one holder to the app at a time. Please check that you have synced all your results before connecting a new holder. To connect a new holder go to Menu > My holder. When you connect a new holder your old holder will automatically disconnect and you cannot reconnect it. What happens if I travel outside my normal time zone? If the time on your phone is changed to local time you may find the app requests you test twice in 24 hours or you may miss a test depending on the time difference. What if I change my phone? Download the Clearblue Connected app to your new phone and sign in with your email and password to access your data. Your holder will continue to sync results to your new phone. Search for the Clearblue Connected app and download from your app store. The app is compatible with most iPhones® and AndroidTM phones equipped with Bluetooth 4.0/BLE. To find out if your phone is compatible and the app is available in your country, check out: www.uk.clearblue.com/connectivity. • Open the app on your phone and create your Clearblue account. • To finalise creating your account you’ll need to click on the link sent to you by email. • Find the wake-up stick in your pack. Use this to connect the holder to your phone, following the instructions on the app. ® Use the wake-up stick to connect the holder to your phone Do not use a test stick to connect the holder • Once your holder is connected press the eject button to remove the wake-up stick. • Keep the wake-up stick as you may need to activate Bluetooth® on your holder so you can sync results to your app. • The Clearblue Connected app will tell you when to test, display your synced results and let you record details about your period and when you had sex. • It will also track and compare your cycles and can advise you when to test for pregnancy. Questions and Answers about the app I can’t connect my holder to the app. What should I do? Check that Bluetooth® on your phone is turned on. Insert the wake-up stick and wait for flashing symbols to appear on the holder display. If no symbols appear there is a problem with the holder. Please call the Clearblue Careline. You can still test using this holder but you’ll be unable to sync results to the app. 2 Important points you need to read before testing 1. Peak Fertility is displayed constantly for 48 hours after it first appears. The holder will not be able to read another test while this is displayed. 2. Every woman’s cycles are unique and hormone patterns differ so the number of fertile days you see is personal to you. In a study of 87 women, this is what we saw: Number of High Fertility days before Peak Fertility 3. If you started testing on the right day and you see more than 9 High Fertility days you may wish to stop testing as it’s unlikely that you will see Peak Fertility this cycle. See Q4. 4. Only test once a day until you see High Fertility. For reliable results you must use the first urine after your longest sleep. When you see High Fertility you can test more often. Drink normally and it’s important not to urinate for 4 hours before testing again. 5. If you remove the battery from the holder you will not be able to use it again. No Peak Fertility after High Fertility 3 How to do a test Determine when to start testing • Use the table below to determine when to start testing. • The day your period starts (first day of full bleeding) is Day 1. Your cycle length is the total number of days from Day 1 up to and including the day before your next period starts. • If your cycle length varies use the shortest cycle over the last 6 to determine when to start testing. How long is your cycle (days)? Start testing on the day shown under your cycle length. • If you don’t know how long your cycle is, we recommend you wait at least one cycle and note the length of it so you know when to start testing. If you don’t want to wait you can use the default cycle length of 28 days. You can select this on the app. • It’s important to start testing on the day shown in the table, for example if your cycle lasts 27 days start testing on day 7. • Always test using the first urine after your longest sleep. 20 days before you expect your next period Test stick Test stick and holder: Eject button 4 Insert the test stick into the holder Display screen 6 Wait for your result a) When you are ready to test, take a test stick out of the foil and take off the cap. 7 Read your result Your most fertile time Your result b) Put the test stick into the holder making sure the arrows line up as shown. (flashing smiley face) (non-flashing smiley face) High Fertility: increased chance of getting pregnant Make love to increase your chances of getting pregnant. A rise in estrogen has been detected. High Fertility will be displayed until your LH surge is detected (Peak Fertility). Peak Fertility: highest chance of getting pregnant Make love to maximise your chances of getting pregnant. Your LH surge has been detected - today and tomorrow are your most fertile days. Once the first day of Peak Fertility is displayed don’t try to test again this cycle. “click” correct d) The ‘test ready’ symbol will then appear. Do the test straight away. If this symbol does not appear or the screen goes blank eject the test stick and put it back into the holder. If symbol does not appear, eject and re-insert a) Either... put just the absorbent tip pointing downwards into your urine stream for 3 seconds. Take care not to get the holder wet. collect a sample of your urine in a clean, dry container and put just the absorbent tip into the sample for 15 seconds. b) Replace the cap and wipe off any excess urine. Keep the absorbent tip pointing down or lying flat. Remember to insert the test stick into the holder before you take the test Low Fertility: small chance of getting pregnant Making love today is just for fun as it’s unlikely that you will get pregnant. Test again tomorrow. How long it will be displayed c) The first time you use the test the new cycle symbols will flash briefly. During first use symbols flash briefly Within 1 minute the test ready symbol will flash to show the test is working. After 5 minutes the display will show your result Do not eject the test stick yet Remember to keep the absorbent tip pointing downwards while testing Low and High Fertility results are displayed for 8 minutes. If you miss seeing your result, eject the test stick and it will re-appear for another 2 minutes. Peak fertility is displayed constantly for 48 hours. If no result is displayed see ‘Holder symbols - error and other symbols’. 8 Check Bluetooth® on your phone is turned on. While your result is displayed on the holder it will be synced automatically with the app providing Bluetooth® is turned on, your phone is close to the holder and the app is open. As soon as the result is synced the Bluetooth® and asterisk symbol will no longer be displayed on the holder. If your result is no longer displayed and has not synced see ‘Q&As about the app’. 9 When you’ve finished with the test Press the eject button to remove your test stick as soon as possible after you have seen the result on your holder. Throw away