miniature pneumatic we invented it electronic valves metric catalogue

Quality People – Quality Products Founded in 1941 by W. L. Clippard, Jr., the company started out manufacturing electronic test equipment. In the 1950’s, Mr. Clippard recognized a need for miniature pneumatic devices in manufacturing, and began to produce a small line of component products. The appeal of these products was such that by the late 1960’s, Clippard Instrument Laboratory was strictly a pneumatic manufacturer. The company has continued to have steady growth through the years bolstered by periodic introductions of new and innovative products. These have included such products as the...

M-EV Series Mouse Valves 2/2 and 3/2 manifold and in-line mounting. Normally-Closed and fully-ported versions. See Pages 06 - 21 Corrosion-Resistant (MCR-EV) Series Mouse Valves Enhanced plating and some stainless steel components add to the life of this valve used with mildly corrosive media, such as moisture in air or gases. See Pages 10 - 19 "Oxygen Clean” (MO-EV) Series Mouse Valves Specially-cleaned valves for analytical or Oxygen use. See Pages 10 - 21 M-ECN, M-EVN, M-ETN Mouse Valves Normally-Open, manifold mount to allow Normally-Closed and Normally-Open valves on the same manifold. See...

Stepper-Controlled Proportional Valve (M-SCPV) High Flow Stepper-Controlled linear actuator with acme lead screw. See Pages 40 - 43 M-ES Series Mouse Valves Alternate mounting with same compact design and reliability. See Pages 44 - 49 10 mm Valves High quality and interchangeable 2/2 and 3/2 solenoid valves. Clippard's smallest electronic valve series. See Pages 50 - 63 15 mm Valves Higher flow and manifold mount. Variety of electrical connections and AC/DC power. See Pages 64 - 76 M-EGV Series Electronic High Flow Poppet Valves Electronically piloted version of the GV series Valves See Pages...

ECR, ETR, EVR, EWR -H Series ECR, ETR, EVR, EWR -L Series ECR, ETR, EVR, EWR Series ECN, EVN, ETN Series EC, EM, ES, ET, EV, EW -H Series EC, EM, ES, ET, EV, EW -L Series EC, EM, ES, ET, EV, EW Series

Electronic Valves – Electronic Mouse Line Valves ETO and similar styles have top exhaust or N.O. inlet. All Clippard standard ET, EC and EV valves are recognized under the Component Program of Underwriters Laboratories, Inc. Fittings should be tightened to a maximum of 1 Nm. Low power coil uses only 0.67 watts at the rated voltage. Standard voltages include 12 and 24. Other voltages are available. Adjusting ring may be loosened for positioning to orient connections. DO NOT REMOVE. Parts orientation will be lost and warranty voided. Clippard Electronic Valves are unique, with only one internal...

Electronic Valves – The Mouse Valve Series Clippard Functional Simplicity The design of Clippard electronic valves is a deceptively simple arrangement with a minimum of operating parts, and remarkably straight forward low power operation. The Clippard “spider” is the only moving part and its motion to operate the valve is a mere 0.18 mm travel. Low voltage D.C. inputs, signals from simple manual switching up to computer directed systems, move the spider in extremely fast response time … 5 to 10 milliseconds. The unit uses extremely low power (0.67 watts at the rated voltage) and is cool running....

Normally-Closed Normally-Closed High Flow Normally-Closed Fully-Ported, ETO-3, Mounting Options www.clippard.comwww.clippard.eu

Clippard's Electronic Valves are incredibly flexible from a production standpoint. • Custom Voltage • Custom Flow Rate Tight Assemblies Cartridge design is desirable for integrating valves into compact assemblies. This EVP proportional valve is calibrated to meet the customers flow range and maintain „zero" leak rate, and is incorporated into the OEM's manifold. Clippard Integrated Solutions offer optimized pneumatic system design to increase performance, reduce cost, and make your job easier. If you need a product that fits your application perfectly, Clippard has the capability to design or...

Sub-Assembly Manifold for Medical Applications In order to blend the proper amount of gases to obtain a desire level of anesthesia, these units utilize the capabilities of Clippard control and electronic valves series. These valves allow you to deliver an accurate and continuous supply of gases with a precise concentration to the patient at a safe pressure and flow.

Oxygen Clean Series (MO-) All EV, ET, EC and EW series electronic valves with the "MO-" part number option are available manufactured and assembled for use in Oxygen-enriched environments for applications that are extremely sensitive to contamination. • Valves are ultrasonically cleaned, assembled, inspected and tested in an enclosed controlled area with a state-of-the-art positive pressure HEPA filtration system • Both organic and inorganic contaminants such as particulate matter and Hydrocarbon oils are removed • No organic sealants, adhesives or lubricants are used in the manufacturing process •...

Electronic Valves – Electronic Valve Features Standard Series Nickel-plated Nickel-plated Electroless nickel-plated steel housing and core Nitrile seals standard Electroless nickel-plated brass body Stainless steel stud and nozzle Stainless steel housing and core Nitrile seals standard Electroless nickel-plated brass body Stainless steel stud and nozzle Cleaned for Oxygen Series (MO-) Electronic Analytical Series (MA-) All wetted parts cleaned per Clippard Standard ES-3.41 No thread sealant All wetted parts cleaned per Clippard Standard ES-3.43 No anaerobic sealant used Electroless nickel-plated...

Electrical Connection Options Manifold Mount Medium: Clean, dry air (40 micron filter) Power Consumption: 0.67 watt (CR Series: 1.2 watt) Temperature Range: 0 to 82°C (CR Series: 0 to 66°C) Response: 5 to 10 milliseconds (nominal) Operating Range: 90 to 150% of rated voltage (CR Series: ±10%) Ports: M5