Water chiller Condenserless Indoor/outdoor installation Capacity from 174 to 487 kW SPINchiller The MSE-SC units belong to the SPINchiller family and therefore feature high energy efficiency, self-adaptation and reliability. They are conderserless units that may be combined with the remote condensers of the CEM series. Thanks to indoor installation and remote dispersal of heat into the ambient air, the noise may be transferred to where it causes less disturbance. Compactness: the width in the units up to 500 kW capacity has been reduced to just 85 cm so that they can pass through normal doorways. Easy connection to the service system plus a simple control system and easy maintenance drastically reduce work requiring specialised personnel and therefore installation costs. Efficiency that increases as the heating load decreases, while guaranteeing maximum requested load when necessary. The particular abundance of optional accessories allows customisation of the unit, also for special requirements both in the civil and technological air-conditioning sphere. In particular the optional for the HydroPack water circulating unit, consistent with the concept of modularity, has several pumps in parallel (up to 3), to monitor the system load variations better. The innovative and hi-tech features of SPINchiller give this series a much higher quality than can generally be found on the market today. functions and features HYDRO PACK Remote condenser Indoor installation Hermetic Scroll Electronic expansion valve Size – MSE-SC ST/EN A - Length ST/EN B - Width ST/EN C - Height ST/EN A1 ST/EN A2 ST/EN B1 ST/EN B2 A1 A2 B1 B2 ST Operating weight EN Operating weight The above mentioned data are referred to standard units for the constructive configurations indicated. For all the other configurations, refer to the relative Technical Bulletin. ST Standard (ST) Extremely low noise(EN) CAUTION! trouble-free operation of the unit it is essential to maintain the safety EN For distances indicated by the green areas.

versions and configurations LOW TEMPERATURE: Low temperature: not required (sizes 65D÷75D, 80D÷90D only, Standard) B Water low temperature (sizes 65D÷75D, 80D÷90D) ACOUSTIC CONFIGURATION: Standard acoustic configuration (Standard) EN Extremely low noise acoustic configuration Supply voltage 400/3/50 without neutral (Standard) ENERGY RECOVERY: Energy recovery: not required (Standard) D Partial energy recovery UNIT INSTALLATION: Indoor installation (Standard) IO Outdoor installation DOUBLE SET POINT: Double set point: not required (Standard) DSP Double set point DSPB Double set point for water...