Packaged unit Simultaneous and independent heating and cooling Water cooled Indoor installation Capacity from 173 to 500 kW HYDRONIC SPINSAVER is the high efficiency monobloc unit for centralised systems, able to provide both simultaneous and independent heating and cooling. SPINchiller technology offers high seasonal efficiency, using several Scroll compressors per circuit and working together with the innovative built-in automatic hydraulic switch system in SPINSAVER. In fact, hot and cold fluids are produced simultaneously in all load conditions with maximum energy recovery. The source is therefore only activated to exchange any excess energy, with considerable savings in terms of extraction circuit pumping energy. As a result, total primary energy savings can reach up to 50%. Thanks to its effective production combination, SPINSAVER is therefore the ideal solution for civil and industrial applications with centralised “four-pipe” type installations. Water cooled Hermetic Scroll Reversible water circuit Electronic expansion valve CAUTION! trouble-free operation of the unit it is essential to maintain the safety For distances indicated by the green areas. Size – WSHF-XSC A - Length B - Width C - Height A1 A2 B1 B2 Operating weight The above mentioned data are referred to standard units for the constructive configurations indicated. For all the other configurations, refer to the relative Technical Bulletin.

LOW TEMPERATURE: Low temperature: not required (Standard) B Water low temperature ACOUSTIC CONFIGURATION: Standard acoustic configuration (Standard) EN Extremely low noise acoustic configuration SYSTEM TYPE: System with terminal units. (Standard) PR System for radiant panels, induction terminals or cold beams. technical data Size – WSHF-XSC COOLING 0% - HEATING 100% Heating capacity (1) Total power input COP at full load COOLING 100% - HEATING 0% Cooling capacity (2) Total power input EER at full load COOLING 100% - HEATING 100% Cooling capacity (3) Heating capacity (3) Total power input Overall...