CERVICAL PEEK CERVICAL PEEK

monza CERVICAL PEEK CONCEPT & DESIGN Monza Cervical Peek is an integrated plate-cage system for anterior arthrodesis of the cervical spine that guarantees immediate and safe mechanical stability thanks to the titanium plate and certain osseointegration thanks to the plasma spray coating of the titanium cage. The peek cervical cage with titanium coating plasma spray has been developed with a lordotic profile and different heights in order to cover all possible anatomies. It also features a central cavity for the insertion of autologous or synthetic bone grafts to promote osseointegration. The...

monza CERVICAL PEEK Clover has invested heavily in instrument design and care with the aim of creating an ergonomic, functional and compact instrumentarium. Designed for the surgeon and his team. TRIAL WITH FINS H4.5 MM TRIAL WITH FINS H5.5 MM TRIAL WITH FINS H6.5 MM TRIAL WITHOUT FINS H4.5 MM TRIAL WITHOUT FINS H5.5 MM TRIAL WITHOUT FINS H6.5 MM

monza CERVICAL PEEK IMPACTOR FOR BONE GRAFT PLATE CAGE BASE PLATE BENDER

monza CERVICAL PEEK SURGICAL TECHNIQUE 1— Disc space preparation The procedure requires general anaesthesia and the patient’s position supine as the approach is anterior. After the incision and once the vertebral plane is exposed, place the autostatic retractor and the distractor with pins, to obtain adequate access to the disc space. Using a microsurgical technique, perform the discectomy and osteophysectomy, then remove the disc and perform any bone and tissue removal with appropriate instruments. 2— Cage selection The ideal implant size can be chosen using the trial set. The trial (MNC-CXSS0XXXXS)...

monza CERVICAL PEEK SURGICAL TECHNIQUE Then screw the implant holder into the central hole in the cage and insert the implant into the intervertebral space until the plate fits tightly against the upper and lower vertebral body. 4— Screw preparation and insertion To position the screw in the cortical bone, insert the awl (MNC-M0SS00002S) into the appropriate holes in the plate, using the guide (MNC-N0SS00002S). The insertion depth is limited by the shape of the instrument. Then insert the tap (MNC-O0SS00033S) and check the hole with the probe (MNC-P0SS00000S) if necessary. The laser markings...

SISTEMA Dl GESTIONE QUALITA CERTIFICATO