ASEPTIQUIK® W
2Pages

WE INSPIRE CONFIDENCE AT EVERY POINT OF CONNECTION SERIES CONNECTORS Genderless AseptiQuik® W Series Connectors with nominal 1 ½” flow path enable quick and easy sterile connections, in large-volume, high-flow production and process intensification environments. The genderless design simplifies system integration and minimizes the risk of operator error. The connectors’ robust construction provides reliable performance without the need for clamps or fixtures. Biopharmaceutical manufacturers benefit from interchangeable 1”, 1 ¼”, and 1 ½” termination sizes for fullscale bioprocessing production environments with the quality and market availability they expect from the leader in the single-use connection technology. Eases single-use systems specifications with one-part number for both halves FLIP - CLICK - PULL- SNAP Intuitive four-step connection process reduces risk of operator error Secure Side Latches Increases connector robustness for wide variety of applications Membrane Pull Tabs Gamma: up to 50 kGy irradiation Autoclave High Temp (HT) Version: Up to 266°F (130°C) for 60 minutes Enables simultaneous and secure removal of both membranes No Secondary Component Needed No need to purchase and store extra materials or tools to complete your sterile connection process Largest AseptiQuik Flow Diameter (1 1/2” Nominal Flow Path) Move liquid medias faster to increase process efficiency OPERATING PRESSURE Up to 60 psi, 4.1 bar Up to 75 psi, 5.1 bar for 48 hours OPERATING TEMPERATURE MATERIALS Main components: Polycarbonate (white) Shipping Clip: Polycarbonate (clear) Side latch: Polyphenylsulfone (blue) Pull Tabs/Caps: Polycarbonate (white, HT version) Pull Tab Guide: Polyphenylsulfone (gray) Seals: Silicone (clear), platinum-cured Membrane: Hydrophobic Polyethersulfone (HT version), PTFE strip sticker TYPICAL FLOW RATE: Cv Value Range: 39-118 for AseptiQuik W Validation and Extractables data can be requested at cpcworldwide.com/AseptiQuik-W Cv values represent the approximate expected flow rate in gallons per minute of water at room temperature for a 1 PSI pressure drop. The flow is generally constrained by the smallest diameter, which in some cases will be the termination diameter and not the Nominal Flow Path. SCAN cpcworldwide.com/AseptiQuik-W WARNING: Pressure, temperature, chemicals, and operating environment can affect the performance of couplings. It is the customer’s responsibility to test the suitability of CPC’s products in their own application conditions. COLDER PRODUCTS COMPANY COLDER PRODUCTS COMPANY GMBH DOVER (SHANGHAI) INDUSTRIAL CO., LTD PHONE: TOLL FREE: FAX: TOLL FREE: E-MAIL: ShangHai, China E-MAIL:

ASEPTIQUIK® W SERIES DIMENSIONS POLYCARBONATE HT WITH WHITE PULL TABS - For autoclave or gamma irradiation applications. TERMINATION = Hose Barb Length ASEPTIQUIK® W ASSEMBLY PROCEDURE STEP 1 Flip the pull tab down while disengaging it from the shipping clip until fully open and clicked into place STEP 3 Pull the membranes by placing one hand in the handle of the pull tabs and the other hand on the termination (Option 1) OR the pull tab guides (Option 2). (Ensure Step 3 is completed prior to moving to Step 4) Scan code to watch AseptiQuik W assembly video Align the two halves and press...