Controllers For power, stirring and temperature control Electrothermal have a comprehensive range of controllers to provide power and temperature control for all your laboratory equipment. Page 42 MC5, MC242, MC227 and MC228X1 1-Way Controllers Page 44 MC240 2-way controller Page 45 MC810B digital controller Page 46 FM110 Flow Monitor Find out more! Please scan the QR/Mobile Tag with your smartphone for more information Electrothermal Catalogue Page 41

1-Way Controllers Introduction There is a choice of 3 models of 1-Way Controllers which operate up to 800W (MC5), 1800W (MC242) or 2300W (MC227); MC228X1 operates up to a maximum of 1100W. These controllers can control one piece of laboratory equipment at a time, or an MC5 equivalent load, ie. on a CMUV22/L which has 3 elements, you With Electric Bunsen can have an MC5 on each element. MC5 Controller Operates at up to 800W The MC5 Controller has been designed to provide a complete answer in controlling the heating of resistive loads for bench top operation. It delivers power up to a maximum of...

1-Way Controllers MC242 MC227 and MC228X1 Controller: Operates at up to 800W Controller: Operates at up to 2300W The MC242 Controller has been designed to regulate the power input to laboratory heating equipment such as Electromantles, Heating Tapes and Cords. It operates up to a power load of 1800W for the 230V model and 1150W for the 115V model. Both power controllers have been designed to regulate the power input to laboratory heating equipment up to 2300W. The MC227 Controller is a 230V controller, and MC228x1 is its 115V equivalent version and operates up to 1100W. The MC242 Controller has...

MC240 Key Features 2-Way Controller • Able to control two pieces of laboratory equipment simultaneously The MC240 is a 2 channel device which provides the user with the • Three neon indicators option to control two pieces of laboratory equipment running • Operates up to a maximum of 800W per simultaneously, but independently of each other. It operates up circuit, at either 115 or 230 Volts. to a maximum of 800W per circuit, at either 115 or 230 Volts. The MC240 2-Way Controller has been designed to work with: • EM series Electromantles • CMU series Electromantles • Electric Bunsen • Heating Tapes...

MC810B Key Features Digital Controller • PTFE-covered platinum resistance thermometer is included for measurements to 270ºC • Zinc die-cast outer case is suitable for the The MC810B Digital Controller provides a convenient means of bench or can be mounted on a 12.7cm support temperature control, using microprocessor techniques to give rod ease of operation and good accuracy. • Programming is done by up/down controls • Three-digit LED display allows you to set a 1ºC It can be used in 3 ways: • In On/Off mode with the hysteresis loop controlling power resolution over a range of -10ºC to 800ºC switching...

FM110 Flow Monitor Flow monitors can be used in conjunction with the Multi (Extraction) Mantles EME and EMEA series. The new Electrothermal FM110 Flow Monitor has been carefully designed to provide increased safety in the laboratory by the monitoring of aqueous liquid used in heating-cooling applications and process control. The turbine assembly is comprised of components made from chemically resistant materials such as PVDF, sapphire, ceramic and viton. A rod support clamp is provided at the rear of the controller to take a standard 12.5mm (1/2”) diameter rod. Two versions of the Flow Monitor...