*mymedicalexpo

Catalogs
Cole-Parmer Instrument Company
PFP7 Industrial Flame Photometer

PFP7 Industrial Flame Photometer

Product catalog summary

Overview: The FF-200 Series Industrial Flame Photometer is designed for industrial analysis, specifically for determining concentrations of sodium, potassium, calcium, barium, and lithium. It features a low temperature, single channel design with a flame failure safety system, making it suitable for both industrial and educational environments.

Key Features:

Supplied with filters for Na, K, Ca, Ba, and Li.
Operates with propane, butane, natural gas, or LPG.
Includes fine and coarse sensitivity controls for accurate measurements.
Comes with 2 meters of gas and air tubing and necessary fittings.
3-year warranty.

Specifications:

Model: FF-200
Range: 0 to 199.9 ppm
Limits of Detection: Na ≤0.2 ppm, K ≤0.2 ppm, Ca ≤15 ppm, Ba ≤30 ppm, Li ≤0.25 ppm
Reproducibility: <1% coefficient of variation for 20 consecutive samples using 10 ppm Na set to read 50
Linearity: <2% error when 3 ppm Na/K and 5 ppm Li are set to read 100
Stability: <2% drift over 5 minutes when continuously aspirating 10 ppm sample set to 50.0
Specificity: Interference from Na/K and Li equal in concentration to test element will be <0.5%
Recorder Output: Nominal 1.00 V for a reading of 100.0
Air Supply: Moisture and oil free, 6 L/min @ 14 psi
Size: 42 x 36 x 30 cm (16.5 x 14.2 x 11.8 in)

Ordering Information: The industrial flame photometer is available under item number 83055-05, series number FF-200, model number FF-200D-I, with a legacy SKU of 500701.

Contact Information: For inquiries, contact Cole-Parmer at various international numbers provided for the USA, Canada, UK, Italy, India, China, and other countries.

Catalog excerpts

• Designed for industrial analysis • Supplied with Na, K, Ca, Ba, and Li filters • Low temperature, single channel • Flame failure safety system • Operates with propane, butane, natural

Open the catalog to page 1

FF-200 SeriesIndustrial Flame Photometer The FF-200 Series is a low temperature, single channel flame photometer that is designed for the routine determination of sodium, potassium, calcium, barium and lithium concentrations. The flame failure safety system makes these products ideal for use in industrial and educational environments. The use of fine and coarse sensitivity controls allows for accurate measurements each and every time. Unit comes with Na+, K+, Ca+, Ba+, and Li+ filters and 2 m (6.5 ft) each of gas and air tubing, and necessary fittings. Order pump, regulator, calibration standards,...

Open the catalog to page 2

All Cole-Parmer Instrument Company catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list