Regular Holder Stainless Steel electro-polished finish or nickel-plated zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required. Material_Min. to Max. Grip Size Part Number Stainless steel electro-polished finish or aluminum construction. Ideal for holding clamps to lab-frames or ring stands. Material Min. to Max. Grip Size Part Number For mounting stirrers and other apparatus. Clamp is constructed of strong aluminum alloy; fitted with over-sized knobs for very secure positioning. Rods supported on 102mm (4”) long surface to avoid vibration and wobble. Material_Min. to Max. Grip Size Part Number Two rod holders with center swivel capacity allow tilting of clamps at any angle in parallel planes. Outside adjustment screw allows close proximity between items being held. Stainless Steel electro-polished or Nickel-plated zinc construction. Material Min. to Max. Grip Size Part Number Surpass standard holding capabilities. The all-position clamp holder permits adjustment at any angle in any plane. Holders are set at 90° to each other, connected by a 90° connector, allowing 360° rotation. Nickel-plated zinc construction. Min. to Max. Grip Size Part Number Cole-Parmer • Toll-Free: 800-323-4340 • Fax: 847-247-2929 • www.coleparmer.com

Hook Connector Stainless steel electro-polished finish or nickel-plated zinc construction. Simple, versatile, and easy-to-use. Hook connectors allow one-handed assembly of two components with one adjustment screw. Material_Min, to Max. Grip Size Part Number (shown in nickel-plated zinc) End-to-End Connector Extend the length of lab-frame rods. Strong aluminum alloy connector permits end-to-end joining of rods. Precision boring of connector ensures perfect alignment of rods. Corrosion-resistant. Comes with Min. to Max. Grip Size_Part Number Rod End Connector Holds rods firmly at 90°. Use when...

CLAMPS & SUPPORTS Connectors & Holders Universal Stirrer Mounting Bracket Use to mount stirrers and other devices to lab-frames. Aluminum mounting bracket with attachment screws. Max. Weight Mounted 2.27kg (5lbs) Multi-Rod Connector Maximum adjustment capability within one connector. Two adjustment rods fit into the oval hole in the connector, preventing turning when tightened. Side and front 13mm (0.51”) holes allow creation of a variety of configurations. Nickel-plated zinc construction. Min. to Max. Rod Size 0 to 13mm (0 to 0.51”) Special adjusting wrench is for use with lab-frame items with...