Post Cementation Procedures Overview

This document outlines the recommended timing and procedural steps for post cementation using Lentulo spirals, specifically for different types of dental restorations including ceramic, composite, and metal crowns, bridges, inlays, and onlays.

Post Cementation with Lentulo Spiral

• Application time options: 30 seconds or 1 minute wait before proceeding.

Crown, Bridge, Inlay, Onlay Cementation

Separate instructions are provided based on the restoration material:

• Ceramic and Composite Restorations: After initial application, wait for 2 seconds, then proceed with a 20-second step or wait as needed.
• Metal Restorations: After initial application, wait for 3 seconds, then proceed with a 3-second step or wait as needed.

General Timing Guidelines

• Overall waiting times range from 30 seconds to 2 minutes depending on the restoration type and material.
• These timings are critical to ensure optimal adhesion and cement setting.

Key Recommendations

• Strict adherence to waiting times is essential for successful cementation.
• Different materials require tailored timing protocols to maximize bonding strength.

For detailed procedural steps and product-specific instructions, refer to the manufacturer's website at www.coltene.com.