The fume cupboard GS 1500/Economy for anatomical reduction finds
4Pages

{{requestButtons}}

Catalog excerpts

The fume cupboard GS 1500/Economy for anatomical reduction finds - 1

Chemical hood for anatomical reduction finds. GS1500/Economy Technical features The GS series bench-type fume hoods are safety devices able to protect laboratory operators from the risk of inhaling harmful volatile chemicals directly recycling the laboratory air with a filtration system. These devices are able to be installed in any working environment, to capture and eliminate harmful volatile substances at source, in accordance with legal requirements. The molecular air filtration process takes place through an adsorption process in size "B" (450x600x100 H mm) highly efficient activated or impregnated carbon filters. Preliminary filtration to remove dust has carried on with one or more size "B" (450x600 mm) dust cover. The unit is also able to equip additional safety filters downstream of the main filter. The filtered air extracted by GS series fume cupboards can be recycled without affecting the operation of the air handler (HVAC) or it could be exhausted outside of the building by means of the 250mm diameter manifold supplied as standard. COMFIT srl Via Viberti, 4 10141 Torino TO Tel. +39011 720085 Fax.+39011 728870 comfit@tiscali.it www.comfit.org Routine inspection and replacement of the filter and pre-filter are extremely simple and safe. GS-series fume cupboards frame is manufactured with epoxy polyester (colour RAL7035) coated steel plate and epoxy paint finished aluminium uprights (colour RAL7015). The sides and front sash are in 3 mm layered safety glass. They are fitted as standard with an electronically controlled centrifugal fan. The internal back baffle is manufactured in 6mm thick acid-resistant white laminate. Subject to change without notice the technical characteristics of the products shown. All rights reserved. COMFIT sas, 05/2014 Aria nuova in laboratorio...

Open the catalog to page 1
The fume cupboard GS 1500/Economy for anatomical reduction finds - 2

All our GS series fume cupboards comply with: -CE Mark under 2006/42/EEC Machinery Directive -2006/95/EEC Low Voltage Directive -2004/108/EEC Electromagnetic Compatibility Directive -CEI EN 61010 -1 Prescriptions regarding the safety of electrical measurement, control and laboratory equipment, Classification C.E.I.66.5 It is certified from Invent UK Ltd, Imperial College London (UK) under: -BS7258, certificate test report number INV/BS7258/261 -DIN 12924, certificate test report number INV/DIN12924/261 -ANSI/ASHRAE 110/1995, certificate test report number INV/ASHRAE 110/263 -BS7989/2001,...

Open the catalog to page 2
The fume cupboard GS 1500/Economy for anatomical reduction finds - 3

The fume cupboard is supplied complete with Operator's Manual and Safety Log Book in Italian, for recording routine inspections. Certification of conformity with the relevant directives (CE marking). Worktop hood reduction find GS1500. Suitable for the reduction of the anatomical artifacts and filling the containers with Formalin Worktop in AISI 316 stainless steel tank including n1 paddling reductions Lcm60xPcm40xHcm10 dispenser with formalin, n1 AISI 304 stainless steel sink with mixer Lcm30xPcm30xHcm18 ,lever and hand shower, new formalin dispenser with pedal and pump BT, disposal of...

Open the catalog to page 3
The fume cupboard GS 1500/Economy for anatomical reduction finds - 4

GS1500 fume cupboard on base Technical dimensions sheet COMFIT srl Via Viberti, 4 10141 Torino TO Tel. +39011 720085 Fax.+39011 728870 comfit@tiscali.it www.comfit.org Subject to change without notice the technical characteristics of the products shown. All rights reserved. COMFIT sas, 05/2014 Aria nuova in laboratorio...

Open the catalog to page 4

All Comfit s.r.l catalogs and technical brochures

  1. CT2 IMP-CLO

    1 Pages

  2. CFI 80/6

    1 Pages

  3. CT96 A/E

    1 Pages