con35
4Pages

{{requestButtons}}

Catalog excerpts

con35 - 1

- excellent electric actuators con35 Linear In-line Actuator Standard Specifications (Specifications for non-standard actuators, eg. HE-version, may vary) Motor/Gear 24 VDC permanent magnet motor (max. current is 1.8 A, absolute max. voltage is 28 VDC) Gear ratio 5 14 19 27 51 71 Maximum load Speed at maximum load 12 VDC permanent magnet motor (max. current is 3.6 A, absolute max. voltage is 14 VDC) Gear ratio 14 19 27 51 71 Maximum load Speed at maximum load Max. static load/ Self locking force PA brackets: 2000 N Alu/Stainless steel: 5400 N Depending on stroke length for push-applications Max. load limited to 1000 N for stroke lengths > 400 mm Temperature Operation: - 20 ˚C to + 70 ˚C Storage: - 40 ˚C to + 70 ˚C Protection class IP66 Cable specification 1 m, 2 x 0,52 mm² (AWG20), Ø = 4.8 mm, black, Molex Mini-Fit Jr. 6 pin Bending Radius 6 x cable diameter Materials Motor and actuator tube are powder coated steel Piston rod is aluminum Front and rear brackets are PA Duty cycle Max. 10 % or 2 minutes in use followed by 18 minutes rest Color Black (RAL 9005) Stroke length/weight Stainless steel versions (AISI 316) Brackets in aluminum or stainless steel Brackets with clevis Brackets with spherical bearings Piston rod available in black Hall sensors for positioning and/or synchronization HE (Harsh Environment) version (Ratio1:5 not available). Tested according to IP68 and IP69 and passed the criteria for a depth of one meter for one hour. Test reports are available on request. Low noise version Other cable lengths (1 - 9 m) Check for updates at www.concens.com Version certified according to IEC60601-1, ANSI/ AAMI/ES60601-1, CAN/CSA-22.2 No60601-1 available (24 VDC only) Available in all RAL colors Customized stroke lengths available Customized front and rear brackets Customized build-in-dimensions Contact Concens for any special requirements

Open the catalog to page 1
con35 - 2

- excellent electric actuators Ratio 1:5 (Not available in HE version) Load 120 N, speed 33 mm/s push / pull Use in the dashed area is not recommended. Please contact Concens for further information. Build-in Dimension Load [N] BID push / pull General dimensional variation: +/- 1 mm Clevis Rear Gear Ratio Build-in Dimension 'BID' Hall Harsh Enviroment Stroke lengths > 400 mm: + 7 mm Stroke lengths > 700 mm: + 42 mm Stroke lengths Dimension BID > 750 mm + 100 mm (On request)

Open the catalog to page 2
con35 - 3

10 16 Alu with clevis Max. load 5400N Alu with clevis Alu with clevis Max. load 5400 N bearings Max. static load 5400N with clevis Max. static load 5400N Alu with spherical 13 bearings Alu with spherical Max. static load 5400 N 28 Stainless steel 16 with clevis Max. static load 5400 N Stainless steel Stainless steel Max. static load 5400N PA with clevis PA static load 2000 N Max. with clevis Max. static load Max. load 900 N 2000N Max. load 900N (gear ratio 1:27) Stainless steel 16 Max. static load 5400 N 10 16 PA with clevis Max. static load 2000N Max. load 900N (gear ratio 1:27) Polyamide...

Open the catalog to page 3
con35 - 4

- excellent electric actuators Con35Item number combination Item Number Combination 3 5 0 0 Type ID Piston ring color Tube color Brackets Steel & IP Class Hall sensors (- without hall /+ with hall) Cable & Connector Cable Length Voltage Gearing Low noise (- without low noise /+ with low noise) Stroke length Product series Recommendations and warnings Never expose the actuator to hammer strike during installation or in other situations. Retrofitted bushings should be pressed into the bracket-borings. No hammering. Power supply without over-current protection can cause serious damage to the...

Open the catalog to page 4

All Concens A/S catalogs and technical brochures

  1. icon Flyer

    2 Pages

  2. Hall Option

    4 Pages

  3. con50

    4 Pages

  4. con60

    4 Pages

  5. icon35/50/60

    2 Pages