- excellent electric actuators con50 Linear In-line Actuator Standard Specifications (Specifications for non-standard actuators, eg. HE-version, may vary) Motor/Gear 24 VDC permanent magnet motor (max. current for ratio 4-14-17-24 is 8 A, ratio 49 is 7 A, ratio 84 is 4,5 A, absolute max. voltage is 28 VDC) Gear ratio 4 14 17 24 49 84 Maximum load Speed at maximum load 12 VDC permanent magnet motor (max. current for ratio 4-14-17-24 is 16 A, ratio 49 is 14 A, ratio 84 is 9 A, absolute max. voltage is 14 VDC) Gear ratio 14 17 24 49 84 Maximum load Speed at maximum load Max. static load/ PA brackets: 4700 N Alu/Stainless steel: 16800 N Self locking force Depending on stroke length for push-applications Max. Load limited to 2000 N for stroke lengths > 400 mm Temperature Operation: - 20 ˚C to + 70 ˚C Storage: - 40 ºC to + 70 ºC Protection class IP66 Cable specification 1 m, 2 x 1.3 mm² (AWG16), Ø = 6.4 mm, black, Molex Mini-Fit Jr. 6 pin Bending Radius 6 x cable diameter Materials Motor and actuator tube are powder coated steel Piston rod is stainless steel Front and rear brackets are PA Duty cycle Max. 10 % or 2 minutes in use followed by 18 minutes rest Color Black (RAL 9005) Stroke length/weight Stainless steel versions (AISI 316) Brackets in aluminum or stainless steel Brackets with clevis Brackets with spherical bearings Hall sensors for positioning and/or synchronization HE (Harsh Environment) version (gear ratio 1:4 not available) Tested according to IP68 and IP69 and passed the criteria for a depth of one meter for one hour. Test reports are available on request. Low noise version Spline and emergency lowering Other cable lengths (1 - 9 m) Check for updates at www.concens.com Version certified according to IEC60601-1, ANSI/ AAMI/ES60601-1, CAN/CSA-22.2 No60601-1 available (24 VDC only) Available in all RAL colors Other stroke lengths available Customized front and rear brackets Customized build-in-dimensions Contact Concens for any special requirements D ATA S H E E T

- excellent electric actuators Ratio 1:4 Load 500 N, speed 70 mm/s push / pull Use in the dashed area is not recommended. Please contact Concens for further information. push / pull General dimensional variation: +/- 1 mm Gear Ratio Build-in Dimension BID Clevis Rear Stroke lengths > 750 mm + 100 mm (On request) Harsh Enviroment Emergency lowering/spli

Max. Max. static steel Max. static steel static load Stainless steel load Stainless load Stainless 16800N clevis 16800N 16800N with with clevis with clevis Stainless steelsteel Stainless load Stainless Stainless Max. Max. static load Max. static steel steel static load with 16800N clevis with with with clevis 16800N clevis 16800N clevis Max. static steelsteel Max. static steel steel Max. load Max. static Stainless static load Stainless load load Stainless Stainless 16800N clevis brackets 16800N with 16800N clevis with with clevis Con50 standard brackets Con50with clevis brackets Con5016800N standard...

- excellent electric actuators Con50 Con50 Item Number Combination Item number combination 5 0 0 0 Type ID Piston ring color Tube color Brackets Steel & IP Class Hall sensors (- without hall /+ with hall) Cable & Connector Cable Length Voltage Gearing Low noise (- without low noise /+ with low noise) Stroke length Product series Recommendations and warnings Never expose the actuator to hammer strike during installation or in other situations. Retrofitted bushings should be pressed into the bracket-borings. No hammering. Power supply without over-current protection can cause serious damage to...