*mymedicalexpo

Catalogs
ConMed
Arthroscopy Product Catalog

Arthroscopy Product Catalog

Product catalog summary

Overview: The document is a comprehensive product catalog for arthroscopy-related medical devices offered by CONMED. It includes detailed sections on various products, ordering information, product support, warranty terms, and service agreements.

Ordering Information: This section outlines the process for placing orders, including the requirement for a purchase order number, billing and shipping instructions, and product details. It also highlights the financial services offered by CONMED, such as flexible financing programs and a rental program for instrument sets and capital equipment.

Product Support: CONMED provides customer support for technical assistance and regulatory compliance. Customers are encouraged to report any injuries or malfunctions. The section emphasizes the company's commitment to providing value-added services alongside quality products.

Warranty Terms: The catalog details the warranty periods for various product categories, ranging from single-use products to powered surgical instruments. It explains the original warranty terms and additional service programs available post-warranty. The section also covers service agreements, service warranty, repair quotes, and return shipping policies.

Product Categories: The catalog is organized into sections based on different types of arthroscopy products, including:

Shoulder Arthroscopy Products: Includes rotator cuff repair, instability repair, and biceps tenodesis.
Knee Arthroscopy Products: Features biocomposite and metal interference screws, femoral fixation implants, and cruciate reconstruction systems.
Hip Arthroscopy Products: Covers bridge systems, hip access instruments, and suture passers.
Small Joint Arthroscopy Products: Includes forceps, graspers, and carpal tunnel release kits.
Fracture Fixation Products: Details bone fixation kits and self-reinforced implants.
Arthroscopy Manual Instruments: Lists various manual instruments and sets.
Resection Products: Describes consoles, footswitches, and handpieces.
Fluid Management Products: Includes pump systems and irrigation accessories.
ESA Electrosurgical Arthroscopy Products: Features RF systems and ablator electrodes.

Additional Information: The catalog provides contact details for customer service within and outside the U.S., emphasizing the importance of customer support and service.

Warranty and Return Policy: The document outlines the warranty and return policy for CONMED instruments. It specifies that the company will investigate and correct any defects covered by warranty through service, repair, or replacement. The warranty does not cover instruments that have been tampered with, misused, or used with unauthorized accessories. The company is not liable for special, incidental, or consequential damages.

Return/Repair Procedures: All instruments must be cleaned and decontaminated before return. An authorized Service Request (SR) Number is required for returns. The document lists the necessary information for processing a repair/return, including catalog and serial numbers, and a description of the issue. Returns must be made within 45 days of the ship date, unused, and in original packaging. A restocking fee applies to most returns.

Product Specifications: The document provides detailed specifications for shoulder arthroscopy products, including the Y-Knot® RC All-Suture Anchor and CrossFT™ Suture Anchor. It describes features such as self-punching technique, fixation strength, and available sizes. The document also lists various instruments and their catalog numbers.

Product Availability and Customer Service: Not all products are available in all markets. Customer service contact information is provided for both U.S. and international customers.

Product Overview: The document provides detailed information on various shoulder arthroscopy products, specifically focusing on the CrossFT™ Knotless and PopLok® suture anchors, as well as other related instruments and kits used in rotator cuff repair.

Specifications:

CrossFT™ Knotless Suture Anchor: Available in PEEK or Biocomposite, with sizes 4.0mm, 4.75mm, and 5.5mm. Features a controlled tensioning mechanism and is used for medial row, lateral row, or primary fixation.
PopLok® Suture Anchor: Made from PEEK, designed for lateral row or primary fixation, with a tactile and audible "POP" for confirmation of fixation.
Super Revo® and ThRevo® Suture Anchors: Titanium, self-punching anchors with proven Revo® Technology, available in various suture configurations.
Paladin® Suture Anchor: Bioabsorbable twist-in anchor made from self-reinforced PLA, available in 5.0mm and 6.5mm sizes.

Procedures and Kits:

Rotator Cuff Repair Kits: Include four anchors, one disposable punch, and one Hi-Fi Passing Loop. Kits are available in different configurations with PEEK CrossFT Knotless Anchors.
Mini-Open Rotator Cuff Repair System: Designed to facilitate open rotator cuff surgery by reducing procedure time and incision size.

Instruments: Various reusable and disposable punches, taps, and drill bits are available for different anchor sizes (4.0mm, 4.75mm, 5.5mm). In-line Drill Guide: Compatible with multiple drill bit sizes.

Customer Service: Contact information is provided for both U.S. and international customers, emphasizing that not all products may be available in all markets.

UltraFix RC Anchors: These are available in 2.9mm diameter, offered as single or in packs of five. They come pre-threaded with polyester sutures and are used for secure fixation in bone.

Y-Knot Flex All-Suture Anchor System: Available in 1.3mm and 1.8mm sizes, these anchors require minimal bone removal and offer secure 360° fixation. They are available in single or double-loaded configurations with Hi-Fi sutures.

PressFT Suture Anchors: These anchors are available in 2.1mm and 2.6mm sizes, offering radiolucent and revisable options with excellent pull-out strength. They incorporate microTCP technology for enhanced performance.

PopLok Anchors: Available in 2.8mm and 3.3mm sizes, these knotless anchors allow for precise tension control and secure suture retention, independent of bone quality.

Bio Mini Revo Anchor: A 3.1mm thread-in style absorbable implant with high pull-out strength, pre-threaded with Hi-Fi suture, ensuring optimal purchase in bone.

UltraFix MiniMite Suture Anchor System: A 2.3mm diameter implant that allows for removal and repositioning before final placement, minimizing tissue and bone damage.

TenoLok Tenodesis Anchor: Made of PEEK, available in 5.0mm and 6.0mm diameters, designed for soft tissue to bone fixation, suitable for various surgical repairs.

Instruments: The document lists various drill bits, guides, and other instruments compatible with the anchors, ensuring precise and efficient surgical procedures.

Customer Service: Contact information is provided for both U.S. and international customers, emphasizing that product availability may vary by market.

Suture Products: Hi-Fi® Suture is a high-performance, nonabsorbable suture made from ultra-high molecular weight polyethylene, designed for orthopedic soft tissue repair. It offers exceptional strength for knot tying and ease of use due to its unique construction, which results in low-profile knots. Various configurations are available, including different needle types and co-braid options.

Accessories: Includes Loop Handle Knot Pusher, Liberator™ Knife, and Rasp Liberator Knife II, among others, designed to assist in tissue repair procedures.

Cannula Systems: ARC™ Adjustable Retractor Cannula: Features a proprietary locking nut and distal wing design for better visualization and range of motion during surgery. Available in different sizes with optional outflow ports. Dry-Doc® Cannula System: Known for its smooth/pleated design, it prevents inadvertent back-out and includes features like a hex cap interface and ratcheting stopcock. Hex Flex® Cannula: Offers a pliable and durable design with spiral threads for a secure hold and easy manipulation. Universal Cannula Set: Includes smooth plastic cannulas with integral double seals and connectors for electrosurgical procedures. Disposable Cannula: Rigid and translucent, designed for single-use with dual silicone seals to prevent fluid leakage. Clear Flexible Cannula: Bendable and abrasion-resistant, suitable for various instruments.

Positioning Devices: AssistArm™ Limb Positioner: A hydraulic-powered device for stable limb placement during surgery, suitable for shoulder, knee, and ankle positioning in various surgical procedures.

Product Overview: The document provides detailed information on various medical devices and accessories used in arthroscopic procedures, particularly focusing on shoulder and knee surgeries. It includes product specifications, usage recommendations, and available accessories.

BeachChair Shoulder Positioning System: This system is designed to securely position patients during shoulder surgeries, reducing the risk of neurapraxia. It is compatible with standard operating tables and adjustable for patient height and angle. Essential components like pads and restraints are included.

Shoulder Holder: Used for upper extremity joint distraction, this device is adjustable to different angles and attaches securely to hospital beds. It is suitable for shoulder, elbow, and wrist arthroscopy.

Arthroscopic Accessories: Includes switching sticks and portal rods made of medical-grade stainless steel, designed for maintaining proper portal sites and placement during procedures.

GENESYS™ Matryx® Interference Screws: These screws are made from advanced biocomposite materials, promoting bone in-growth and providing reliable fixation. They are available in various sizes to accommodate different surgical needs.

BioScrew® Bioabsorbable Interference Screws: Made from Poly (L-Lactic Acid), these screws are gradually absorbed by the body, eliminating the need for removal. They ensure secure graft fixation and are available in different sizes and styles, including the XtraLok® variant with a tapered proximal end.

Instrumentation: The document lists various drivers and taps compatible with the interference screws, highlighting their modular and fixed designs for different screw sizes.

Customer Service: Contact information for customer service is provided for both U.S. and international customers.

Overview: This document provides detailed specifications and descriptions of various interference screws and related instrumentation used in knee arthroscopy, particularly for ACL and PCL reconstruction. It includes product specifications, materials, and usage guidelines.

Specifications:

Modular Tri-Lobe Driver: Designed for 7.0 – 11.0mm interference screws, available in standard and extended lengths.
Propel Cannulated Interference Screws: Feature a unique double-helix thread for symmetrical starts and reduced veering. Available in various sizes with a 3.5mm hex driver compatibility.
CONMED Cannulated Interference Screws: Spiral tip design to limit divergence, available in multiple diameters and lengths, supplied sterile with guidewires.
Guardsman Interference Screws: Designed for endoscopic femoral fixation with polished threads for graft protection and a non-glare head for improved visualization.
EZStart Interference Screw: Features a dual-start thread design for self-tapping and a tapered nose for easy placement.

Instrumentation:

Drivers: Various modular and fixed drivers for different screw sizes, including 2.5mm and 3.5mm hex drivers.
Ratcheting Handle: Ergonomic design for easy screw insertion and removal, compatible with multiple driver attachments.
Guidewires: Available in different materials and sizes, including stainless steel and Nitinol.

Materials and Packaging: All screws are made from titanium alloy per ASTM F-136 and are packaged sterile for single use.

Customer Service: Contact information is provided for both U.S. and international customers for ordering and inquiries.

Overview: This document provides detailed information on various knee arthroscopy products, focusing on femoral fixation implants and associated instruments. It includes specifications, features, and catalog numbers for ordering.

GraftMax™ Button: An adjustable cortical fixation device offering maximum fixation, graft fill, and reproducibility. It reduces displacement by 70% and features a fully adjustable loop. Available in different models: ALB, BTB, and Cradle.

XO Button®: A titanium extracortical soft tissue fixation implant used in cruciate reconstructions. It features a pre-stretched continuous loop and integrated repositioning method. Available in various loop lengths from 15mm to 60mm.

Pinn-ACL® CrossPin System: Designed for transverse femoral fixation in ACL reconstruction, this system includes a bioabsorbable Graft Harness and CrossPin implant. It offers increased pull-out strength and begins absorption in 15 to 24 weeks.

EndoPearl® Fixation Device: Used with an interference screw, this device enhances soft tissue graft fixation within the femoral socket. Made of Poly (L-Lactic Acid), it increases graft pullout by up to 50%.

Soft Tissue Anchoring Screw System: Features a low-profile screw and washer combination for soft tissue fixation to bone. Available in cortical and cancellous styles with various lengths and diameters.

SE™ Graft Tensioning System: Provides a method for equalizing stress between soft tissue graft bundles, ensuring uniform load distribution in ACL reconstruction. Includes various accessories for precise tensioning.

Instrumentation: Includes drivers, taps, drills, and accessories for use with the fixation systems. Specific tools are provided for each system to ensure proper installation and use.

Warnings: Cortical and cancellous screws, as well as spiked and flat washers, are not approved for use in the posterior elements of the cervical, thoracic, or lumbar spine.

Overview: This document provides detailed information on various surgical instruments and systems used in femoral ACL reconstruction, focusing on tunnel placement and graft fixation techniques. It includes specifications for different approaches and tools, such as the GraftMax™ Curved Reaming System, Bullseye® Femoral Guides, and Pinn·ACL® Guide System.

Specifications: The document lists numerous instruments with their catalog numbers, including reamers, guide pins, and curettes. Each tool is designed for specific surgical approaches, such as the medial portal, transtibial, and outside-in approaches.

Procedures: The document outlines the use of various guides and reamers for creating tunnels and fixing grafts in ACL and PCL reconstruction. It highlights the flexibility of the Pinn·ACL® Guide System, which allows for variable angle adjustments and precise pin placement.

Norms and Recommendations: The document emphasizes the importance of using the correct size and type of instrument for each surgical procedure to ensure optimal outcomes. It also suggests using disposable kits for cost efficiency and convenience.

Accessories and Additional Tools: Additional tools such as bone tunnel plugs, magnetic retrievers, and precision probes are described, along with their specific uses in surgery. The document also mentions the Parasmillie® Graft Harvester, designed for efficient tendon harvesting.

Key Data: The document includes detailed specifications for each instrument, such as dimensions and materials, ensuring that surgeons can select the appropriate tools for their procedures.

Tendon Harvesters: The document describes tendon harvesters designed for safe retrieval of semitendinosus and gracilis tendons during ACL and PCL reconstruction. These devices allow for grafts of known lengths to be harvested while minimizing trauma to muscle and soft tissue. They can be used for blunt dissection and offer controlled cutting action to prevent tearing.

Cruciate Reconstruction Accessories: Includes tendon strippers with 7mm and 6.6mm diameter openings for harvesting full-thickness tendons without damaging surrounding tissue. The open loop design eliminates the need for threading tendons through a closed loop.

Eccentric Guides and Tunnel Notcher: These tools aid in ACL reconstruction by positioning a 2-pin passer or tunnel notcher precisely. The tunnel notcher creates a pathway in cancellous bone to enhance guidewire placement and facilitate screw insertion.

Concept® GraFix® Tunnel Dilator System: This modular system is used in ACL and PCL surgeries to improve graft fixation within tunnels. It features dilators with tapered ends for easy insertion and removal, ergonomic T-handles, and a slap-hammer to ensure inline force application.

Graft Preparation System: The system is used for preparing soft tissue and bone-tendon-bone grafts. It includes components for cleaning, stitching, measuring, and pre-tensioning grafts. The system allows for easy intraoperative component changes.

Sawblades Accessories: ACL sawblades with depth stops are designed for use with specific surgical systems to ensure consistent bone block cutting during cruciate reconstruction.

Reamer Systems: GraftMax™ Flex™ Sentinel Reamers are available in various sizes for ligament reconstruction procedures, facilitating anatomical tunnel placement while protecting cartilage and soft tissue.

Sentinel® Drill Bits: These drill bits are designed for minimally invasive techniques in ACL reconstruction, supporting anatomical graft placement and minimizing damage to cartilage and soft tissue.

Reamer Systems: The document details various reamer systems used in knee arthroscopy, including specifications for different diameters and packaging. The Badger® Drill Bits are designed for endoscopic ACL techniques with features like a tapered head and etched depth marks for easy identification. The GraFix® Coring Reamer System allows for tibial tunnel reaming while harvesting a bone core, which can be used for grafts or filling defects. It includes a quick connect adapter and a unique packaging system for bone core collection.

Long Head and Short Head C-Reamer™: These reamers are designed for ACL and PCL reconstruction, featuring sharp cutting edges to minimize bone necrosis and tapered edges for easy removal. They are available in various diameters and are packaged sterile for single use.

OCD Repair - SmartNail®: The SmartNail® is a bio-absorbable bone fixation nail used for non-load bearing bones. Made from a PLA copolymer, it biodegrades over 2-3 years, eliminating the need for removal surgery. It is available in different sizes and is sterile and inert.

Meniscal Fixation Implants: The Sequent™ Meniscal Repair Device allows for continuous stitching of meniscal tears with PEEK Optima Implants. The Contour™ Meniscus Arrow is used for repairing meniscus tears, made from a self-reinforced copolymer for high strength and resorption over 24 weeks. The CrossBow® Inserter enhances the insertion strength of the Meniscus Arrow by eliminating the need for pre-forming a hole.

Customer Service: Contact information for customer service is provided for both U.S. and international customers, including phone and fax numbers.

Overview: This document provides detailed information on various medical devices and systems used in knee and hip arthroscopy, focusing on meniscal fixation systems, sterilization trays, positioning devices, and hip arthroscopy products.

Meniscal Fixation Systems: The document describes the CrossBow Sterilization Tray and various cannulas designed for meniscal fixation. The Contour™ Meniscus Arrow™ Manual Instrument Set is highlighted for its efficiency in repairing meniscus tears, reducing operation times by up to 50% compared to traditional methods. The Zone Specific® II Meniscal Repair System includes cannulas, needles, and rasps designed for inside-out meniscal repair, with features like funnel ends for safe needle loading and fluid venting ports.

Sterilization Trays: CONMED offers a customizable sterilization system for ACL procedures, including a container that houses up to three insert trays for organizing instruments. Specific trays for ACL femoral, tibial, and accessory instruments are available, along with various accessories like filters and indicator cards.

Positioning Devices: The AssistArm™ Limb Positioner is designed for stable limb placement during surgeries, powered by hydraulic fluid without the need for electricity or batteries. It is suitable for various procedures, including shoulder, knee, and ankle surgeries. The Shutt® Universal Stress Post and Zimmer Mason Leg Holder are also mentioned for their roles in positioning and minimizing patient trauma.

Hip Arthroscopy Products: The DoubleLatch® Bridge System is noted for its quick-connect design and ergonomic features for hip joint procedures. Various cannulas and obturators are available, along with portal dilators and disposable kits for hip access. The Shutt® Series 210® Manual Instruments offer a range of tips for accessing deep hip joints, emphasizing quality and durability.

Conclusion: The document provides comprehensive details on the specifications, procedures, and accessories for knee and hip arthroscopy products, emphasizing efficiency, safety, and ease of use.

Manual Instruments: The document lists various manual instruments for knee arthroscopy, including different types of forceps, micro-scissors, and grasping forceps. Each instrument is identified by a specific code, indicating its type and specifications.

Signature Series Blades and Burs: These are designed for hip joint procedures, featuring longer and stronger blades with unique curved burs for precise resection. They operate at specific RPMs and are available in various configurations, including pre-bent and straight styles.

Hip Manual Instruments: This section includes instruments like cupped and open curettes, extended length suture cutters, and other tools necessary for hip procedures. The microfracture instrumentation set is highlighted for its extended working length and various configurations.

Spectrum MVP Suture Passer: This tool is designed for effective suture passing and retrieval while preserving labral tissue. It comes in different hook configurations and is packaged sterile.

Poplok Knotless Suture Anchor: This anchor features a unique suture locking mechanism for dependable fixation. It allows for suture tensioning after seating and is available in different sizes with specific suture strands.

PressFT Anchor: Known as the smallest press-fit PEEK anchor for hip arthroscopy, it is available with specific suture strands and comes with various drill bits and guides.

Bio Mini Revo Hip Instability Repair System: This system includes a 3.1mm diameter implant with high pull-out strength and bioabsorbable characteristics. It features a low-profile instrument set for precise placement.

LightWave Suction Ablator: This device incorporates a one-piece molded handle for use with electrosurgical generators, featuring hand controls and adjustable suction control.

Overview: The document is a brochure for the Hip Preservation System, specifically focusing on small joint arthroscopy products. It includes detailed specifications and descriptions of various instruments and kits used in arthroscopic procedures.

Specifications: The brochure lists various small joint forceps and graspers, including standard and mosquito tip graspers, and 45° forceps. Each product is detailed with diameter, length, and specific features such as blunt tips and angles.

Instrument Sets: Suggested instruments for master and basic small joint sets are provided, including blunt tip forceps, scoop tip forceps, and various knives. The brochure also describes the small joint instrument case designed for Shutt® small joint forceps.

Probes, Curettes, and Dissectors: The document details small joint probes designed for 360° rotation, lightweight control, and ease of insertion. Curettes and dissectors are described with features like atraumatic tips and indexed handles for proper orientation.

Arthroscopy Knives and Cannula Set: The brochure describes small joint arthroscopy knives with hexagonal handles and various blade designs. The tubing and cannula set includes features like beveled tips and one-way valves for maintaining a clear field of vision.

Carpal Tunnel Release Kit: The CTS Relief Kit® is highlighted for its use in endoscopic release of the transverse carpal ligament, reducing post-operative pain and recovery time.

Traction Device: The TractionTower® is described as a device for securing and distracting extremities during procedures, with features like a tension scale and adjustable ball joint.

Anchors: The TruShot™ with Y-Knot® system is detailed for soft tissue fixation, offering minimal bone removal and various suture options.

Customer Service: Contact information for customer service within and outside the U.S. is provided, emphasizing that not all products may be available in all markets.

Product Specifications and Features:

TruShot with Y-Knot: Available in various drill diameters (1.3mm to 1.8mm) and depths (10mm to 20mm), equipped with Hi-Fi Sutures of different sizes.
UltraFix MicroMite Suture Anchor: Designed for small joint procedures, offering a 1.5mm diameter for applications in wrist, hand, foot, and ankle surgeries. Features an ergonomic insertion gun for easy placement.
Mini Revo Suture Anchor: Features 2.7mm wide threads for superior bone purchase, pre-loaded with polyester sutures, and can be retrieved safely from bone.
UltrAblator: Used for ablation and coagulation in small joint surgeries, with a 60mm length and 2.5mm diameter.
1.5mm Bone Fixation Kit: Provides a resorbable solution for bone fixation, available in various lengths and diameters, packaged sterile and disposable.
SmartPin Implants: Made of PLLA, these implants offer non-load bearing immobilization and eliminate the need for removal.

Instruments and Accessories:

Shutt Manual Instruments: Known for precision and durability, available in various configurations for arthroscopic procedures.
Forceps: Includes blunt tip, B-Scoop, and shovel nose forceps, available in different angles and diameters for specific surgical needs.

Customer Service: Contact information provided for both U.S. and international customers for product inquiries and support.

Overview: This document provides a detailed catalog of arthroscopy manual instruments, including specifications, categories, and customer service information. The instruments are designed for various surgical procedures, particularly focusing on arthroscopic and mini-open shoulder repairs.

Specifications: The document lists various instruments with specific dimensions and angles, such as linear punches, graspers, scissors, and forceps. Each instrument is identified by a catalog number and includes details like diameter, length, and angle of operation.

Categories: The instruments are categorized into different types, including:

Linear Punches and Graspers: Available in various tip sizes and angles for precise surgical applications.
Rotary Scissors: Offered in left and right orientations for versatile use.
Meniscal Lift Punches and Retro Punches: Designed for specific meniscal procedures.
Suture Instruments: Includes suture retrievers, snares, and scissors for effective suture management.
Standard and Mosquito Tip Graspers: Available in different diameters and lengths for small joint procedures.
Forceps: Includes blunt and scoop tip forceps with various angles for different surgical needs.

Instrument Sets: The document describes comprehensive instrument sets like the MASTER Arthroscopy Shoulder Instrument Set, which includes a variety of tools for shoulder repairs, and the Shutt® Small Joint Set, which is tailored for small joint surgeries.

Accessories: Additional accessories such as instrument trays, forceps stands, and precision probes are also detailed, highlighting their design features and sterilization capabilities.

Customer Service: Contact information for customer service is provided for both U.S. and international customers, emphasizing the availability of products in different markets.

Product Overview: The document provides detailed specifications and descriptions of various surgical instruments and accessories, primarily focusing on curettes, dissectors, consoles, footswitches, handpieces, and blades used in medical procedures.

Specifications:

Small Joint Curette/Dissector: Designed for multiple applications with an atraumatic tip for ligament testing and adhesion lysis. Features a tapered curette tip for easy insertion and protection of articular surfaces.
Consoles: Includes models like D4000, D4000A with irrigation pump, Advantage Console, and E9000 Console, each with specific dimensions and weights. These consoles operate various shavers and handpieces.
Footswitches & Accessories: Offers 2-pedal and 3-pedal footswitches, including the ZEN Wireless 3-Pedal Footswitch and its adapter, compatible with Advantage, E9000, and PowerPro Consoles.
Handpieces: Various models like Two-Button Ergo Shaver, No-Button Ergo Shaver, and Advantage Turbo Shaver, each with specific speed ranges and compatibility with large hub shaver blades and burs.
Signature Series Blades and Burs: Designed for hip joint procedures, available in pre-bent and straight styles with patented XtraSharp technology and Merlin bendable technology.

Key Features:

Blades and burs are designed for precise resection in deep, narrow joint spaces.
Stealth Diamond-Like Carbon Coated Blades are available in various sizes and are disposable.

Customer Service: Contact information is provided for both U.S. and international customers, emphasizing that not all products may be available in all markets.

Product Overview: The document provides a comprehensive list of various surgical shaver blades and their specifications. These blades are designed for aggressive tissue and bone resection, suitable for different surgical procedures.

Key Products and Specifications:

Gator® Stealth™: Available in 4.2mm and 5.5mm sizes, ideal for aggressive tissue and bone resection.
UltraFRR Stealth™: Similar applications as Gator® Stealth™, available in 4.2mm and 5.5mm sizes.
UltraGator® Stealth™: Also available in 4.2mm and 5.5mm sizes, designed for aggressive tissue and bone resection.
Lanza™ Tapered Specialty Shaver Blades: Disposable blades, 4.2mm size, packaged 6 per box.
Great White® Blade: Designed for aggressive soft tissue resection, including ACL stump removal, available in various sizes and configurations.
Ultracut® Blade: Suitable for general debridement applications, available in multiple sizes.
Liberator Plus™ Blade: Ideal for labral injuries, available in 4.2mm size.
Mako™ Blade: Suitable for procedures like subacromial decompression, available in 4.2mm and 5.5mm sizes.
Full-Radius Resector: Available in various sizes, designed for soft tissue and bone cutting.
Cuda® Blade: All-purpose aggressive blade for extensive tissue removal, available in multiple sizes.
Tiger® Blade: Ideal for extensive tissue removal, available in 3.5mm and 4.2mm sizes.
End Cutter: Useful for general soft tissue debridement, available in 3.5mm and 4.2mm sizes.
Dragon® End Cutter: Designed for meniscal trimming and joint debridement, available in multiple sizes.
Meniscus Cutter: Available in 3.5mm, 4.2mm, and 5.5mm sizes, designed for meniscus trimming.
Slotted Whisker: Multi-purpose blade for tough tissue resections, available in 4.2mm and 5.5mm sizes.

Compatibility: All blades are compatible with specific handpieces such as Ergo™, Advantage® Turbo, Advantage, and Apex® models.

Customer Service: Contact information is provided for customer service within and outside the U.S. Note that not all products may be available in all markets.

Overview: This document provides detailed specifications and usage guidelines for various surgical tools and equipment, primarily focusing on resection products and fluid management systems used in arthroscopic surgeries.

Resection Products:

Meniscus Cutter: Designed for non-aggressive debridement of fine synovium, fatty tissue, and articulating surfaces.
Large Hub Burs and Routers: Compatible with specific handpieces like Ergo™, Advantage® Turbo, and Apex®. These include spherical, tapered, and oval burs, each with specific applications such as bony site preparation, cartilage debridement, and osteophyte resection.
Cyclone® and Vortex® Routers: Cyclone® is used for aggressive bony site preparation, while Vortex® is ultra-aggressive, ideal for extensive bone and cartilage removal.
Micro Hub Blades: Includes Great White®, Mako, and Gator® blades, designed for aggressive soft tissue resection and procedures like subacromial decompression.
Specialty Blades: Cuda® and Dragon® End Cutter blades are used for extensive tissue removal and tough tissue resections like meniscus tears.

Fluid Management Products:

24k® Irrigation System Console: Manages arthroscopy fluid needs with a maximum flow rate of 2.5 liters per minute and pressure settings ranging from 10-150 mmHg.
24k Autoclavable Remote Control: A remote with multiple functions for controlling pressure, flow rates, and suction.
24k Interface Cable and Shaver Sensor: These accessories allow the 24k Pump to control suction through the shaver handpiece.
Arthroscopic Tubing Sets: Various tube sets like 24k100 and 10k100 are used for controlling inflow, outflow, and shaver suction during surgeries.

Customer Service: Contact information is provided for both U.S. and international customers, noting that not all products may be available in all markets.

Overview: This document provides detailed information on various fluid management and electrosurgical products used in arthroscopic and laparoscopic procedures. It includes specifications, usage instructions, and compatibility details for different pump systems, tubing sets, and control devices.

Fluid Management Systems:

24k® and 10k® Pump Systems: These systems are designed for arthroscopic and laparoscopic procedures, offering various tube sets for inflow and suction. The 24k® system includes an autoclave remote control and shaver sensor.
EcoFlow® Day-Use Tubing System: Includes single-use and day-use inflow tube sets compatible with both 10k and 24k pumps.
87k™ and 83000 Arthroscopy Pump Systems: These systems include sterile tubing sets with inflow lines and Luer-lock connections, designed for specific pump models.

Irrigation Accessories:

Apex® Universal Irrigation Accessories: Features a microprocessor-based console for fluid management, with disposable tubing sets available in one or two connection options.
Gravity Tubing & Suction Devices: Includes disposable tubing sets with two or four spikes, designed for high flow rates and compatibility with existing sheaths or cannulas.

Electrosurgical Products:

Edge™ Bipolar Arthroscopic RF System: Offers a generator and probes for bipolar and monopolar RF ablation and coagulation, with integrated handpiece control and temperature monitoring.
LightWave® Suction Ablators: Designed for use with standard electrosurgical generators, featuring hand controls and adjustable suction.
UltrAblator®: Available in standard and aggressive models, these devices are ideal for various surgical procedures such as chondroplasty and subacromial decompression.

Customer Service: Contact information is provided for both U.S. and international customers, with phone and fax numbers available for inquiries and support.

Key Specifications:

10k® Irrigation System Console: Maximum flow of 2000ml/min, pressure range of 30-150mmHg, and dimensions of 7.75"w x 6.5"h x 8"d.
Edge™ Probes: Available in various angles and lengths, designed for specific procedures with integrated suction and memory chip for optimized performance.

Product Overview: The document provides a detailed catalog of ESA Electrosurgical Arthroscopy Products, including various electrodes and kits designed for specific surgical procedures. The products are categorized based on their design and intended use, such as subacromial decompression, notchplasty, thermal capsular shift, ACL modification, and meniscectomy.

Specifications: The catalog lists electrodes with different angles (30°, 90°, 45°) and lengths (ranging from 75mm to 165mm). Each product is identified by a unique catalog number and is available in basic kits, mini-kits, or as standalone electrodes. Basic kits typically include an electrode, a hand-switching pencil with a three-prong plug, and a safety holster, while mini-kits also include a dispersive patient pad.

Procedures and Indications: The electrodes are designed for specific surgical applications:

Concept® Ablator: Ideal for subacromial decompression and notchplasty.
Heatwave®: Suitable for thermal capsular shift and ACL modification.
Soft Tissue Electrode: Used for subcutaneous lateral release, removal of plica, and coagulation following synovectomy.
Meniscectomy Electrode: Designed for resecting meniscal tears with various tip angles for different surgical approaches.
Acromioplasty Electrode: Used in shoulder surgeries to protect unaffected soft tissue.
Small Joint Electrode: Effective for procedures involving the wrist and other small joints.

Recommendations and Limitations: The products are sold in boxes of five and are not suitable for use in procedures involving non-electrically conductive fluid media. Availability may vary by market.

Customer Service: Contact information is provided for both U.S. and international customers, including phone numbers, fax numbers, and email addresses for inquiries and support.

Catalog excerpts

Arthroscopy Product Catalog SPECTRUM AUTOPASS SUTURE PASSER CARBON COATED BLADES ARTHROSCOPIC RESECTION SYSTEM To learn more about these and other products, call 800 -448-6506 or visit CONMED.co

Open the catalog to page 1

Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 727.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.45

Open the catalog to page 3

Ordering Information Terms CONMED standard terms are net thirty (30) days, F.O.B. shipping point, unless otherwise approved in writing by CONMED. All orders and transactions are subject to the laws of the state of Florida. To Place Your Order Please provide a purchase order number, billing and shipping instructions, product catalog number and description, valid CONMED quotation, and quantity and pricing to one of the following: Your Sales Representative Customer Service Phone: 800-237-0169 Fax: 727-399-5256 E-mail: [email protected] CONMED Attn: Customer Service 11311 Concept Boulevard Largo,...

Open the catalog to page 4

Product Support At CONMED, we want to offer more than a quality product. We take pride in being able to provide you with value added services to support our products. The information given in this catalog is designed to address your questions regarding product support. Customer Support If you encounter a problem or need technical assistance, contact Customer Service (Product Support) or your Sales Representative. Refer to the Customer Service telephone numbers listed on page 2. Regulatory Compliance Report any injuries or malfunctions to CONMED Customer Service. Refer to the Customer Service...

Open the catalog to page 5

Warranty Terms Warranty Terms If the customer discovers within the warranty period (Original or Service Agreement) that an Instrument has a defect in materials and/or workmanship, the customer must promptly notify the Company. Also, if the customer discovers within the service warranty period that any service or repair work performed by CONMED has a defect in workmanship and/or materials, the customer must promptly notify the Company. If it becomes necessary to return the Instrument to the Company, the customer must (a) acquire a “Service Request” (SR) authorization from the Company Customer...

Open the catalog to page 6

Return/Repair Information Return Terms 1. ll instruments must be cleaned and decontaminated prior to the A return to CONMED. Instruments contaminated with biohazardous materials will be returned to you at your expense. If it becomes necessary to return a product after purchase, the product must be returned within 45 days of its ship date. The product must be returned unused, in the original packaging and be restockable. Returns must be shipped prepaid freight. Returns that are not shipped prepaid freight will not be accepted. All product returns, except those attributable to a CONMED error, are...

Open the catalog to page 7

Shoulder Arthroscopy Products SHOULDER ARTHROSCOPY PRODUCTS 6, SHOULDER ARTHROSCOPY PRODUCTS Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 727.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4

Open the catalog to page 8

Rotator Cuff Repair Y-Knot RC All-Suture Anchor » Self-Punching = Simpler Technique » 360° FormFit Fixation = Strong Purchase (602N pullout) » mall Size = Less Bone Removal (2.8mm footprint, expands subcortically S to 5.0mm) » All-Suture = Less Invasive » Available double- or triple-loaded » vailable with 1.3mm tieable Hi-Fi Ribbon, 2mm Hi-Fi Tape, A double or triple-loaded with #2 Hi-Fi sutures with or without needles ® Y-Knot RC triple-loaded anchor ® Y-Knot RC with Ribbon ® Y-Knot RC with Needles ® 2.8mm Y-Knot RC Broaching Punch All products may not be available in all markets. Customer Service:...

Open the catalog to page 9

Rotator Cuff Repair CrossFT Suture Anchor ™ All PEEK fully threaded anchor » For medial row or primary fixation » Cancellous and cortical threads provide exceptional fixation strength » Broaching punch minimizes cortical stress fractures » Cannulated to channel growth factors » Double or triple loaded with Hi-Fi Suture ® Suture Color Blue, white-blue, Implants and/or white-black 6.5mm CrossFT Suture Anchor ™ 6.5mm CrossFT Broaching Punch All products may not be available in all markets. 8, SHOULDER ARTHROSCOPY PRODUCTS Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 727.399.5256 • Customer...

Open the catalog to page 10

Rotator Cuff Repair GENESYS CrossFT Suture Anchor ™ Biocomposite, fully-threaded anchor. » Composed of GENESYS biocomposite material, using microTCP technology » For medial row or primary fixation » Cancellous and cortical threads provide exceptional fixation strength » Broaching punch minimizes cortical stress fractures » Cannulated to channel growth factors » Double or triple loaded with Hi-Fi Suture ™ Suture Color Blue, white-blue, and/or white-black 5.5mm GENESYS ™ CrossFT™ Suture Anchor 5.5mm GENESYS ™ CrossFT™ Broaching Punch 5.5mm GENESYS ™ CrossFT™ Punch/Tap All products may not be available...

Open the catalog to page 11

Rotator Cuff Repair CrossFT Knotless DT Suture Anchor » Knotless twist-in anchor for medial row, lateral row, or primary fixation » PEEK Material » Controlled tensioning mechanism to help keep set tension on tendon » Deep Thread pattern designed for strong cancellous bone fixation » Multiple sizes available: 4.0mm, 4.75mm, 5.5mm, 6.5mm ™ CrossFT Knotless DT Anchor ™ CrossFT™ Knotless DT Punch All products may not be available in all markets. 10, SHOULDER ARTHROSCOPY PRODUCTS Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 727.399.5256 • Customer Service: (outside U.S.) Phone:

Open the catalog to page 12

Rotator Cuff Repair CrossFT Knotless Suture Anchor » Knotless twist-in anchor for medial row, lateral row or primary fixation » PEEK or Biocomposite » Controlled tensioning mechanism to help keep set tension on tendon » Multiple sizes available. 4.0mm, 4.75mm, or 5.5mm » our anchor kits available. Kits will come with four anchors, one disposable F CrossFT Knotless Punch, and one Hi-Fi Passing Loop. ™ PEEK Biocomposite CrossFT™ Knotless Anchor 5.5mm CrossFT™ Knotless Punch/Tap All products may not be available in all markets. Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 727.399.5256...

Open the catalog to page 13

Arthroscopy Product Catalog

Arthroscopy Product Catalog

Catalog excerpts

All ConMed catalogs and technical brochures

Archived catalogs