H-2008
2Pages

ITEM NONO. REQUIRED. Model H-2008 AUTOPSY/DISSECTING TABLE Features • Stainless Steel Construction • Separate Irrigation Hoses • Suction Hose with Reversing Valve • Chrome-Plated Gas Cock • Continuous Flushing System • Hot and Cold Water Faucets • Electrical System • Removable Drawers • RubberCutting Board • Two Coved Sinks • Disposal Specifications Model H-2008 Autopsy/Dissecting Table shall be constructed of 14-gauge (1.9 mm) stainless steel for top and sinks and 20 gauge (0.9 mm) in cabinets. Separate irrigation hoses shall be provided stored in undercabinet when not in use. Suction hose is to be powered by water aspi rator with reversing valve for cleaning hose. Gascockisto be chrome-plated. Continuous-flushing system isto be integral with rim to eliminate cleaning problems. Hot and cold water faucets are to be provided. Model H-2008 Autopsy/Dissecting table is result of extensive study and research of work flow of pathologist and diener. Facilities required for post-mortem procedures have been provided and arranged to minimize unnecessary steps. Need for separate dissecting table (usually located in remote area of room) has been eliminated. Drawers and cabinets have been provided for storage of instruments, plastic bags, saws, etc. Table is constructed entirely of stainless steel and has coved corners in all working areas for ease of cleaning. Cabinet and drawers are to be coved-cornered, and drawers are to be easily removableforcleaning. Rubber cutting board shall be supplied with stainless steel legs to allow flushing underneath with bumpers to keep board steady. Six stainless steel slats in top are to be easily removable. Stainless steel perforated cover is to be provided for waste trough on both dissecting table and autopsy table. Table is to have two 12 " (305 mm) x 12" (305 mm) x 10" (254 mm) deep coved-cornered sinks. Standing overflow pipe shall be provided for one sink Disposal shall be available for one sink bowl. Table shall have dry work area for accessories and preparation of specimens. Two waterproof 115-volt electrical outlets. cmp CONTINENTAL METAL PRODUCTS CO., INC/P.O. BOX 2295, U35 OLYMPIA AVENUE, WOBURN, MA 01888 PHONE (781) 935-4400 FAX (781) 935-4404 • www.continentalmetal.com • email address cmpwbn@gis.net

Storage Cabinet _ Rinse Down Valve 20" x 12" x 5" 1508 mm x 305 mm x 127 mm Deep Drawer) 3" |*“(76mml Continental Metal Products Co Inc . reserves the right to change materials and specifications resulting from a continuous effort to improve its products. Warranty CMP parts are warranted against factory defects for a period of 1 year, and will be replaced upon return of defective item. All units will be serviced by factory without cost to buyer (labor and materials) for 90 days following installation. After 90 day period, replacement of a defective part (labor) will be at buyer's expense....