CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR healthcare division Stainless Steel Sink Workstations Proudly Made in the USA for over 65 years CMP has been building Stainless Steel Sink Workstations for over 65 years. CMP’s Sink Workstations are of the highest quality and are extremely rugged and durable. Sink Workstations are available in many standard sizes and can also be customized to meet any requirement. CMP is so confident in our quality and craftsmanship that we offer a two year labor and six year parts warranty. Features: • Stainless Steel Construction • Many Sink Sizes Available • Integral Backsplash • Reinforcement Channels • Optional S/S Undershelf • Holes in Counter for Faucets • Many Standard Sizes Available • Raised No Drip Marine Edge • Optional End Splashes Available • Stainless Steel Sink Apron • S/S Tubular Crossbracing • Optional Waste Disposer • Custom Sizes • Coved Corner Integral Sinks • 16 Gauge S/S Countertop • Adjustable Bullet Feet • Stainless Steel Legs • Optional Eyewash Continental Metal Products Co., Inc. – 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 93

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR healthcare division Stainless Steel Sink Workstations Proudly Made in the USA for over 65 years Specifications: Continental Metal Products Stainless Steel Sink Workstations shall be constructed of type 304 stainless steel with a no. 4 finish. All corners are welded, ground, blended and polished to match a no. 4 finish. Standard dimensions shall be 25” deep x 36 to 37-½” high x 48” to 120” wide (in 12” increments). Unit shall be constructed of no. 16 gauge stainless steel top...

PLAN VIEW SWING SPOUT k PRE—RINSE SPRAY W/ 4 FT FLEXIBLE HOSE ™ 1. ALL FIXTURES ARE FURNISHED LOOSE FOR INSTALLATION BY PLUMBING CONTRACTOR. 2. ALL S/S SHALL BE TYPE 304 POLISHED EDGE ON FRONT k RIGHT SIDE k 4" H. INTEGRAL COVED CORNER BACK-SPLASH k LEFT END-SPLASH. INTEGRAL COVE CORNER SINK W/ S/S BASKET DRAIN ALL SERVICES MUST BE ROUGHED IN FROM REAR WALL. HEIGHTS ARE SHOWN TO BOTTOM OF CONNECTIONS. ALLOWANCES MUST BE MADE FOR VALVES, TRAPS AND OTHER CONNECTION LEGS W/ ADJ. BULLET FEET CONTINENTAL METAL PRODUCTS u CO., INC. MODEL NO. WS1-48 WORK STATION W/ (1) SINK

SWING SPOUT k PRE—RINSE SPRAY W/ 4 FT FLEXIBLE HOSE REQUIRED SERVICES 1. ALL FIXTURES ARE FURNISHED LOOSE FOR INSTALLATION BY PLUMBING CONTRACTOR. 2. ALL S/S SHALL BE PfPE 304 POLISHED EDGE ON FRONT k LEFT SIDE k 4" H. INTEGRAL COVED CORNER BACK-SPLASH k RIGHT END-SPU\SH. INTEGRAL COVE CORNER SINKS W/ S/S BASKET DRAIN FRONT & LEFT SIDE ALL SERVICES MUST BE ROUGHED IN FROM REAR WALL. HEIGHTS ARE SHOWN TO BOTTOM OF CONNECTIONS. ALLOWANCES MUST BE MADE FOR VALVES, TRAPS AND OTHER CONNECTION LEGS W/ ADJ. BULLET FEET CONTINENTAL METAL PRODUCTS u CO., INC. MODEL NO. WS2-72 WORK STATION W/ (2) SINKS

LEFT EDGE OF COUNTER REQUIRED SERVICES PLAN VIEW SWING SPOUT & PRE-RINSE SPRAY W/ 4 FT FLEXIBLE HOSE RAISED MARINE EDGE FRONT & BOTH ENDS 1. ALL FIXTURES ARE FURNISHED LOOSE FOR INSTALLATION BY PLUMBING CONTRACTOR. 2. ALL S/S SHALL BE TYPE 304 POLISHED PLEASE NOTE LOCATION OF REAR SUPPORT LEG WHEN LOCATING PLUMBING ROUGH-INS ALL SERVICES MUST BE ROUGHED IN FROM REAR WALL. HEIGHTS ARE SHOWN TO BOTTOM OF CONNECTIONS. ALLOWANCES MUST BE MADE FOR VALVES, TRAPS AND OTHER CONNECTION OFFSET CLIP BASKET DRAIN CONTINENTAL METAL PRODUCTS u CO., INC. MODEL NO. WS2-96 TWO SINK WORK STATION W/ SINKS CENTERED...

1. ALL FIXTURES ARE FURNISHED LOOSE FOR INSTALU\TION BY PLUMBING CONTRACTOR. 2. ALL S/S SHALL BE TYPE 304 POLISHED SUPPLY BY GENERAL CONTRACTOR. SWING SPOUT & PRE-RINSE SPRAY W/ 4 FT FLEXIBLE HOSE PLAN VIEW FISHER MANUFACTURING W/ SWIVEL GOOSENECK SPOUT FRONT & BOTH SIDES LEGS W/ ADJ. BULLET FEET REQUIRED SERVICES EDGE ON FRONT & SIDES & 4" H. INTEGRAL COVED CORNER BACK-SPLASH. INTEGRAL COVE CORNER SINKS W/ S/S BASKET DRAIN k \-Y{ TAILPIECE. WITH TOP ROSETTE (80-00-17) AND COMPLETE OFFSET CLIP BASKET DRAIN ALL SERVICES MUST BE ROUGHED IN FROM REAR WALL. HEIGHTS ARE SHOWN TO BOTTOM OF CONNECTIONS....

SWING SPOUT & PRE—RINSE SPRAY W/ 4 FT FLEXIBLE HOSE PLAN VIEW REQUIRED SERVICES RAISED MARINE EDGE FRONT & BOTH ENDS 1. ALL FIXTURES ARE FURNISHED LOOSE FOR INSTALLATION BY PLUMBING CONTRACTOR. 2. ALL S/S SHALL BE TYPE 304 POLISHED ALL SERVICES MUST BE ROUGHED IN FROM REAR WALL. HEIGHTS ARE SHOWN TO BOTTOM OF CONNECTIONS. ALLOWANCES MUST BE MADE FOR VALVES, TRAPS AND OTHER CONNECTION CONTINENTAL METAL PRODUCTS U CO., INC. MODEL NO. WS3-96 THREE SINK WORK STATION W/ SINKS CENTERED