Surgical Scrub Sinks
14Pages

{{requestButtons}}

Catalog excerpts

Surgical Scrub Sinks - 1

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR healthcare division Surgical Scrub Sinks Proudly Made in the USA for over 65 years CMP has been manufacturing Stainless Steel Surgical Scrub Sinks for over 65 years. Our high quality Scrub Sinks have gained the attention of top architects and equipment planners as a superior product in the industry. CMP Surgical Scrub Sinks can be found in almost every hospital in the U.S. and can be configured for your unique requirements. CMP is so confident in our quality and craftsmanship that we offer a two year labor and six year parts warranty. Features: • Stainless Steel Construction • Removable Bay Panels • Infrared Sensor Operated Water • Automatic Timed Scrub Cycle • Removable Shower Head • Adjustable Thermostatic Mixing Valve • Choice of one, two, three or four bays • Pedestal Base or Wall Mounting • 115°F Temperature Protection • Adjustable Pressure Regulator • Optional Laminar Flow Shower Head • Digital Timer • Knee Operated Water • Emergency Eyewash • Knee Operated Soap • Anti-Splash Tub Continental Metal Products Co., Inc. – 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com sales@continentalmetal.com

Open the catalog to page 1
Surgical Scrub Sinks - 2

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR healthcare division Surgical Scrub Sinks Proudly Made in the USA for over 65 years Manual Surgical Scrub Sinks • Knee Operated Water Flow Tempered water is easily turned on/off by pressing the knee anywhere on labeled water panel. • 1-32AS - 32” wide x 27 ¼” deep x 38” high (one bay) • 2-63AS - 62-7/8” wide x 27 ¼” deep x 38” high (two bays) • 3-94AS - 94-1/8” wide x 27 ¼” deep x 38” high (three bays) • 4-120AS - 120” wide x 27 ¼” deep x 38” high (four bays) Electronic Surgical Scrub Sinks...

Open the catalog to page 2
Surgical Scrub Sinks - 3

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR healthcare division Surgical Scrub Sinks Proudly Made in the USA for over 65 years Specifications: Continental Metal Products Surgical Scrub Sinks are constructed of 16 gauge, type 304 stainless steel with horizontal and vertical corners coved to ¼” radius. All corners are to be welded and all welds ground and polished to match No. 4 finish. Sinks shall have sloping basin to eliminate back splash. Each station shall be equipped with 2” IPS stainless steel drain, anti-splash gooseneck faucet,...

Open the catalog to page 3
Surgical Scrub Sinks - 4

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR healthcare division Surgical Scrub Sinks Proudly Made in the USA for over 65 years Details: Model 2-63E Shown (with optional soap dispenser) Optional Eyewash can be mounted inside tub Gooseneck spout with flow control and removable head Thermostatic mixing valve Removable control panel Soap spout ¼” R. coved corners 16 Ga. anti-splash tub Easily removable flush front access panels Knee activated soap panel (removable) Scrub Sinks Available with Optional Laminar Flow Shower Head: - Provides splash...

Open the catalog to page 4
Surgical Scrub Sinks - 5

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR healthcare division Surgical Scrub Sinks Proudly Made in the USA for over 65 years Options: • Manual Surgical Scrub Sink (AS Model) • Automatic Surgical Scrub Sink (A Model) • One Bay • Three Bays • In-Wall Chair Carriers for wall mounting • Electronic Surgical Scrub Sink (E Model) • Knee Operated Soap Dispenser Pump • Digital Timer – Preset 1, 3, 5 or 10 minute cycles (120VAC w/ cord & plug) • Laminar Flow Shower Head - Provides splash free laminar stream - Pressure compensating for constant flow...

Open the catalog to page 5
Surgical Scrub Sinks - 6

ROUND EM) MOUNTING tfl.ES NDTE: STUB DRAIN OUT REAR WALL 24" ABDVE FINISHED FLDDR MODEL ND. 1-32AS SINGLE BAY SURGICAL SCRUB SINK V THIGH OPERATED WATER, SDAP DISPENSER AND CHAIR CARRIER SUPPDRT SYSTEM CONTINENTAL METAL PRODUCTSUCD., INC.

Open the catalog to page 6
Surgical Scrub Sinks - 7

GOOSENECK FAUCET W/ ADJ. FLOW CONTROL THERMOSTATIC MIXING VALVE 2" PERFORATED STRAINER DRAIN CARRIER SUPPORT SYSTEM AND BRACKETS CONTROL PANEL, REMOVABLE S/S COVED CORNER BASIN W/ SOUND DEADENING UNDERCOAT PLEXIGLASS DIVIDER PARTITION S/S WALL SHELF AND BRACKETS SOAP PANEL, REMOVABLE W/ THIGH ACTIVATED PUMP WATER PANEL, REMOVABLE W/ THIGH OPERATED PUSH- PUSH-OFF WATER CONTROL_ TYPE 304 S/S CONSTRUCTION W/ #4 FINISH SOAP SPOUT REQUIRED CONNECTIONS NOTE: STUB DRAIN OUT REAR WALL 24" ABOVE FINISHED FLOOR MODEL NO. 2-63AS DOUBLE BAY SURGICAL SCRUB SINK W/ THIGH OPERATED WATER AND SOAP, CHAIR...

Open the catalog to page 7
Surgical Scrub Sinks - 8

ROUND END MOUNTING HOLES FINISHED FLOOR GOOSENECK FAUCET W/ ADJ. FLOW CONTROL THERMOSTATIC MIXING VALVE 2" PERFORATED STRAINER DRAIN CARRIER SUPPORT SYSTEM AND BRACKETS CONTROL PANEL, REMOVABLE S/S COVED CORNER BASIN W/ SOUND DEADENING UNDERCOAT PLEXIGLASS DIVIDER PARTITION SOAP SPOUT SOAP PANEL, REMOVABLE WITH THIGH ACTIVATED PUMP WATER PANEL, REMOVABLE W/ THIGH OPERATED PUSH- PUSH-OFF WATER CONTROL_ TYPE 304 S/S CONSTRUCTION W/ #4 FINISH REQUIRED CONNECTIONS NOTE: STUB DRAIN OUT REAR WALL 24" ABOVE FINISHED FLOOR MODEL NO. 3-94AS TRIPLE BAY SURGICAL SCRUB SINK W/ THIGH OPERATED WATER,...

Open the catalog to page 8
Surgical Scrub Sinks - 9

ROUND END MOUNTING HOLES FINISHED FLOOR NOTE: STUB DRAIN OUT REAR WALL 24" ABOVE FINISHED FLOOR MODEL NO. 1-32E SINGLE BAY SURGICAL SCRUB SINK W/ ELECTRONIC SENSOR, PEDESTAL BASE, DIGITAL TIMER, EMERGENCY ACTIVATED MECHANICAL WATER FLOW VALVE AND KNEE OPERATED SOAP DISPENSER GOOSENECK FAUCET W/ ADJ. FLOW CONTROL THERMOSTATIC MIXING VALVE 2" PERFORATED STRAINER DRAIN CONTROL PANEL, REMOVABLE S/S COVED CORNER BASIN W/ SOUND DEADENING UNDERCOAT SOAP SPOUT SOAP PANEL, REMOVABLE W/ THIGH ACTIVATED PUMP EMERGENCY ACTIVATED MECHANICAL WATER FLOW, OPERATED FRONT PANEL HINGED AND REMOVABLE TYPE 304...

Open the catalog to page 9

All Continental Metal Products catalogs and technical brochures

  1. JC-65

    4 Pages

  2. H-2008

    2 Pages

  3. model 24

    2 Pages

  4. product catalog

    160 Pages