Cordis EMPIRA ™ RX PTCA Pre-Dilatation Catheter

Product catalog summary

Overview: The Cordis EMPIRA™ RX PTCA Pre-Dilatation Catheter is designed to treat a wide range of lesions with exceptional crossability and recrossability. It features a next-generation DURALYN® Flex Balloon Material that enhances flexibility and trackability.

Specifications:

Balloon Diameter: Ranges from 1.50 mm to 4.00 mm.
Balloon Length: Options include 6, 10, 12, 15, 20, and 30 mm.
Primary Crossing Profile: 0.0339 inches.
Shaft Diameters: Proximal 1.9F / Distal 2.7F.
Shaft Length: 139 cm.
Minimum Guiding Catheter: 5F.
Maximum Guidewire: .014 inches.
Nominal/Rated Burst Pressure: 8/14 atm.

Features:

Crossability: Proprietary folding and pleating reduce the primary profile, aiding in reaching difficult lesions.
Recrossability: Hydrophilic coating enhances lubricity and durability for multiple crossings.
Flexibility: The DURALYN® Flex Balloon Material is 50% more flexible than previous materials, improving crossability and ease of use.
Ease of Use: White color-coded strain relief for quick identification and a clear hub for spotting bubbles or fluid.

Performance:

Short inflation and deflation times due to effective design.
PTFE-coated, kink-resistant hypotube shaft enhances durability.

Ordering Information: The document provides specific ordering codes for various balloon diameters and lengths, ensuring precise selection for medical needs.

Important Information: Users are advised to refer to the Instructions for Use for detailed indications, contraindications, side effects, and precautions. Cordis reserves the right to change product specifications without prior notification.

Catalog excerpts

Cordis EMPIRA ™ RX PTCA Pre-Dilatation Catheter-1

Cordis EMPIRA RX PTCA Pre-Dilatation Catheter EMPIRA™ Balloon Catheter helps you reach & treat a wide range of lesions with exceptional crossability Cordis EMPIRA RX PTCA Pre-Dilatation Catheter EMPIRA RX PTCA Pre-Dilatation Catheter - Technical Information ™ Primary crossing profile* Strain relief color Balloon material DURALYN® Flex Balloon Material, semi-compliant Shaft diameters Shaft length Minimum guiding catheter Maximum guidewire Nominal/Rated burst pressure (RBP) 8/14 atm ¼ size pressure 3.0 mm balloon at 16 atm pressure reaches 3.26 mm in diameter Kissing balloon technique (KBT) compatible with Cordis 6F Guiding Catheters1 *Measured across the distal markerband of a 3.00 x 20 EMPIRA™ RX PTCA Pre-Dilatation Catheter EMPIRA™ RX PTCA Pre-Dilatation Catheter - Ordering Codes Balloon Diameter (mm) PRODUCT CODE LEGEND 85R06150S Reference: 1. Cordis data on file, 2010 and 2011. Important Information: Prior to use, refer to the Instructions for Use supplied with these devices for indications, contraindications, side effects, suggested procedure, warnings and precautions. As part of the Cordis policy of continuous product development, we reserve the right to change product specifications without prior notification. Third-party trademarks are the trademarks of their respective owners. © CORDIS Europe, a division of Johnson & Johnson Medical N.V. Tel: +32 2 746 3000 Fax: +32 2 746 3405 2E-800-1989-2 January 2012 ® Semi-Compliant Diameter Length Rapid Exchange Product

Open the catalog to page 1

Cordis EMPIRA ™ RX PTCA Pre-Dilatation Catheter-2

Cordis EMPIRA RX PTCA Pre-Dilatation Catheter EMPIRA™ Balloon Catheter features a low crossing profile1*† EMPIRA™ Balloon Catheter: Designed for a wide range of lesions • Crossability: Proprietary folding & pleating reduce the primary profile, helping you reach even hard-to-treat lesions1 • Recrossability: Innovative hydrophilic coating improves lubricity & durability through multiple crosses • Flexibility: Next-generation DURALYN® Flex Balloon Material & kink-resistant shaft improve crossability & trackability Next-generation DURALYN® Flex Balloon Material is 50% more flexible than DURALYN®1...

Open the catalog to page 2