Bencox Cup System
6Pages

{{requestButtons}}

Catalog excerpts

Bencox Cup System - 1

Manufacturing Plant 12, Yeongsanhong 1-gil, Ipjang-myeon, Seobuk-gu, Cheonan-si, Chungcheongnam-do, Korea Tel : 82-41-585-7114 Fax : 82-41-585-7113 Seoul office 483, Gangnam-daero, Seocho-gu, Seoul, Korea Tel : 82-2-3445-5492~5 Fax : 82-2-3445-5467,5497 Corentec America 17305 Von Karman Ave. Suite 114, Irvine, CA 92614, USA Tel : 1-949-379-6227 Fax : 1-949-387-5716 EC Representitive : Emergo Europe Molenstraat 15, 2513 BH, The Hague, The Netherlands Tel : 31-70-345-8570 Fax : 31-70-346-7299

Open the catalog to page 1
Bencox Cup System - 2

Acetabular Component • Acetabular Component is hemisphere-shaped, maximizing the peripheral and polar contact at once. •Three screw holes are anatomically designed and located for more effective fixation; and enough insertion angles are allowed to simplify the surgery.

Open the catalog to page 2
Bencox Cup System - 3

turface Treatment Plasma Sprayed Ti Coating • The surface treatment on an artificial joint is an essential factor for success; at the same time, it's the precise indication of a manufacturer's technique. • Acetabular Component of Bencox Hip System is coated using plasma spray method. •The microporous pure titanium coating with more than 30% porosity leads to direct bone apposition for secondary stability. Rough surface supports a more stable primary fixation. Two-in one Bearing Cup System Unique locking design allows for ceramic and PE liner in one cup. Bencox forte Bencox delta Secure...

Open the catalog to page 3
Bencox Cup System - 4

Various Choice of PE Liners ■ Standard, extended and elevated type allows for the use in extended indication situations. • PE liner offers use with 28,32,36,40mm CoCr Mo femoral heads. POLYETHYLENE THICKNESS HEAD OUTER LOADING DOME SIZE DIAMETER POINT HEAD OUTER LOADING nnilE SIZE DIAMETER POINT Standard type I Extended type-40/44 I Elevated type LOADINIG POINT Iross-Llnked UHMWPE for PE Liner ■ Compression molded GUR 1020 rods are used. Initial toughness and strength is higher than 1050. • Gamma irradiated at room temp, to a 75kGy to facilitate cross-linking • After irradiation, the rods...

Open the catalog to page 4
Bencox Cup System - 5

Ceramic Liner Order(available upon request) Forte Liner 28/37G, Delta Liner 28/37G Standard Type Extended Type Elevated Type Bencox Metal Head Standard Type Skirted Type

Open the catalog to page 5
Bencox Cup System - 6

Ordering Information Ceramic Liner Forte Liner 28/39G, Delta Liner 32/39G Forte Liner 28/39G, Delta Liner 32/39G Forte Liner 28/39G, Delta Liner 32/39G Forte Liner 32/44G, Delta Liner 36/44G Forte Liner 32/44G, Delta Liner 36/44G Forte Liner 32/44G, Delta Liner 36/44G Forte Liner 32/44G, Delta Liner 36/44G Forte Liner 32/48G, Delta Liner 36/48G, Delta Liner 40/48G Forte Liner 32/48G, Delta Liner 36/48G, Delta Liner 40/48G Forte Liner 32/48G, Delta Liner 36/48G, Delta Liner 40/48G Forte Liner 32/52G, Delta Liner 36/52G, Delta Liner 40/52G Forte Liner 32/52G, Delta Liner 36/52G, Delta Liner...

Open the catalog to page 6

All Corentec catalogs and technical brochures

  1. Bencox® Cup

    2 Pages

  2. ID Stem

    4 Pages

  3. Bencox Stem

    2 Pages