1. Open back support and lay flat. Corflex manufactures a quality line of products and to help your care for the product properly we provided the following instructions for care & cleaning: 2. Note: optional metal stays may be removed at this time from back panel if needed or to launder product. 3. Grasp side of support, making sure stay openings are facing upward and center on small of back. 4. Pull left side firmly across abdominal region, repeat for right side and secure loop portion onto hook portion. Remove any medal stays if possible, close all contact closures and hand wash in warm water with mild soap. Product should be air-dried, do not use high temperatures to wash or dry. 5. Thread strap through buckle and secure.. 6. Adjust to desired tension level, making sure not to over tighten. The Corflex Customer Service Team is ready to assist you in placing Your order. You may place your orders via a variety of methods: 669 East Industrial Park Drive - Manchester, NH 03109 Phone (603) 623-3344 - Fax (603) 623-4111 - www.corflex.com © Corflex | The advice and information contained in this document is not intended as a substitute for medical counseling. If you have any questions about treatment for a specific condition, please check with a health care professional. CORFLEX, Inc. Attn: Customer Service 669 East Industrial Park Dr Manchester, NH 03109 USA