IMPRESSION TRAY
1 / 9Pages

Catalog excerpts

IMPRESSION TRAY - 1

CORIMPLANT TRAY www.corident.com

Open the catalog to page 1
IMPRESSION TRAY - 2

Instruction CoriImplant Tray is composed of up and down large, medium size and covered with 7 transparent plastic cover. Plastic cover composed of 7 pieces 4 Trays Composed of 14 Covers

Open the catalog to page 2
IMPRESSION TRAY - 3

IMPLANT IMPRESSION Before Impression condition of Implant patient With screws in the mouth before Implant Impression Insert transparent cover on the tray. Insert the cover avoiding the part to get the impression. Try to put on the tray in the mouth. Check the location of tray cover part and screw part and check if the screw protrudes out.

Open the catalog to page 3
IMPRESSION TRAY - 4

It is ok to detach the Screw part Cover and make a hole on the screw zone. Get the impression of Putty Type. Insert the cover from the inner side of the tray. Widen the gap between the cover using a detaching tool and detach the cover. It is easier to detach the cover if you close up the try slightly with your hand.

Open the catalog to page 4
IMPRESSION TRAY - 5

Put the Putty Type impression material in the tray.. Cover the Putty with plastic wrap.. Get the impression of Putty and let the screw part be protrude. Mix the Injection Type and put it on the Putty impression. . Spread the mixed Injection Type on the part to get impression in the mouth.

Open the catalog to page 5
IMPRESSION TRAY - 6

Get the impression of inside the mouth. Get the impression fixing the screw part is exactly outside. Unscrew after the impression material becomes hard. Remove the tray out of the mouth with care. Bottom side of the removed tray.

Open the catalog to page 6
IMPRESSION TRAY - 7

Insert the Lab Analog in the Impression and fasten the screw. Pour the gypsum on the Tray. Pour the gypsum to cover the Lab Analog enough as bulging. Unscrew and detach the gypsum model after the gypsum is hardened.

Open the catalog to page 7
IMPRESSION TRAY - 8

Completed Impression model Impression taken

Open the catalog to page 8
IMPRESSION TRAY - 9

CORIMPLANT TRAY CORIIMPLANT TRAY is harmless to human constitutes firm aluminum body and it is strong and secure. The bottom part is transparent plastic and composed of 7 pieces which can be separated from the body. It is convenient to get the impression without making individual try since the plastic part can be detached from the implant screw. It is harmless to human since made of aluminum and possible to disinfect in the high temperature. Corimplant Tray bottom is made of transparent plastic material which is It is more economic than individual tray and disposable tray. - There is no...

Open the catalog to page 9

All CORIDENT catalogs and technical brochures

  1. new catalog

    10 Pages