Ball Abutment System
1 / 15Pages

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System INDEX Product Description Product Characteristics Product Selection Guide · INNO Implant System™ · Miniplus Implant System™ User Manual

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System PRODUCT DESCRIPTION INDICATIONS • The Ball Abutment System is a medical device. • Designed for use with removable overdentures or partial dentures retained in whole or in part by endosseous implants in the maxilla and mandible. CONTRAINDICATIONS • Not appropriate where a totally rigid connection is required. • Use on a single implant with divergence of greater than 50° based on 2 implants is not recommended. • Not appropriate for fixed restorations. SINGLE-USE DEVICES • All components of the Ball Abutment System except for...

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System PRODUCT CHARACTERISTICS • Available for INNO Submerged, Internal and External Fixture as well as for Miniplus Ball Type Fixture. • Self-locating structure helps denture to be easily and safely seated. • Path compensation is possible to any direction within 50 degrees based 2 implants. • 3 kinds of Inner Caps allow various retention forces. (10, 15 & 20N) • Easy to place and remove male components with I&R Driver. • Retrofitting the Ball Abutment System to existing complete denture is possible. • Restorations are possible...

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System Product Selection Guide: INNO Implant System™ Block-out Spacer Ball Abutment INNO Submerged Fixture INNO Sub. Short Fixture Ball Abutment Ball Abutment INNO Internal Fixture INNO External Fixture ©2019 Cowellmedi Co., Ltd. All rights reser

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System For INNO Submerged Fixture Block-out Spacer > Packing Unit : 1 Ball Abutment + 3 Inner Caps (1 per each colour) + 1 Block-out Spacer + 1 Outer cap > For the INNO Submerged Fixture > For Implant supported overdenture restoration > Tightened with the Ball Ratchet Driver and Torque Wrench > Tightening torque force : 30 Ncm > Direct impression Ball Abutment For INNO Internal Fixture Block-out Spacer Diameter Length > Packing Unit : 1 Ball Abutment + 3 Inner Caps (1 per each colour) + 1 Block-out Spacer + 1 Outer cap > For the...

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System For INNO External Fixture Block-out Spacer > Packing Unit : 1 Ball Abutment + 3 Inner Caps (1 per each colour) + 1 Block-out Spacer + 1 Outer cap > For the INNO External Fixture > For Implant supported overdenture restoration > Tightened with the Ball Ratchet Driver and Torque Wrench > Tightening torque force : 30 Ncm > Direct impression Ball Abutment Common for All 3 Types of Fixtures Ball Outer Cap BATC003C > Packing Unit : 2 Outer Caps Ball Inner Cap Block-out Spacer BATC003I > Packing Unit: 2 Block-out Spacers + 6...

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System Ball Ratchet Driver KRB19L > Packing Unit: 1 Ball Ratchet Driver > Used with the Torque Wrench to Tighten and Untighten the Ball Abutment *Extra Product Torque Wrench KTW001 > Packing Unit: 1 Torque Wrench > Used with the Ball Ratchet Driver > Torque Force at 10, 25, 30 & 35 Ncm to be controlled by pulling elastic bar > Maximal 120 Ncm by pulling the rigid main bar Ball I&R Driver For Removal KRB19L For Insertion > Packing Unit: 1 Ball I&R Driver > Used to Insert and Remove the Inner Caps into and out of the Outer Cap...

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System Product Selection Guide: Miniplus® Implant System – Ball Type Fixture Block-out Spacer Mini Ball Analog Mini Ball Impression Coping Miniplus Ball Type Fixture ©2019 Cowellmedi Co., Ltd. All rights rese

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System Mini Ball Analog AMBL001 > Packing Unit : 1 Mini Ball Analog > Replacement of the Ball Fixture Shape in Working Cast Mini Ball Impression Coping AMBI001 > Packing Unit : 1 Mini Ball Impression Coping > Used for the Miniplus Ball Fixture impression taking Mini Ball Fixture Machine Driver KMDB27L > Packing Unit: 1 Mini Ball Fixture Machine Driver > Used to install the Mini Ball Fixture by machine Mini Ball Fixture Ratchet Driver KRDB19L > Packing Unit: 1 Mini Ball Fixture Ratchet Driver > Used to install the Mini Ball...

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System USER MANUAL 1. REMOVAL OF THE COVER SCREW OR THE HEALING ABUTMENT • The Healing Abutment in place. • Remove the Cover Screw or the Healing Abutment using the 1.2 Hex Machine or Ratchet Driver. 2. SELECTION AND CONNECTION OF THE BALL ABUTMENT • Connect the Ball Abutment with the Ball Ratchet Driver. • Tighten the Ball Abutment at 25 Ncm using the Torque Wrench. • Make sure if the Ball Abutment is correctly tightened at 25 Ncm. • Apply the impression material around the Ball Abutment and the tray. • After completing the...

COWELL® Implant Solution - INNO Implant System™ Ball Abutment System 4. FABRICATION OF WORKING MODEL • Insert the Ball Analog into its correspond ding location of the impression body, pour the stone and let it harden. • Remove the working cast from the impression body and complete the working model. 5. DENTURE FABRICATION 1) When the height of the gingiva is sufficient or the socket position is secured. • Attach the Block-out Spacer and the Outer • Apply a primary heavy body impression material for the block-out. Cap assembled with the Inner Cap on the Ball Abutment. • Conduct the block-out...