INNO EXTERNAL IMPLANT (Ext.) System Flow 자기는 읽었는데 답없을때보면 그럴때인가부네 Fixture Level Impression Pick-up Squared Impression Coping Transfer Post Plastic UCLA Shoulder Positioning Cylinder Abutment Level Impression

INNO External Implant (Ext.) * Diameter Length > Packing unit :1 Fixture + 1 Mount + 1 Mount Screw. External Fixture Surface Treatment : SLA-SH® > Interchangeable with external hexagonal fixture. > External hex connection (Hex 2.7 / 3.4). * Diameter Length * Diameter Length Type body External Taper Surface Treatment Mount Pre-Mount SLA INNO Fixture Code

Diameter Length Component Selection Guide for Cemented & UCLA Abutment > Packing unit : 1 Mount + 1 Mount Screw. > Tightened with the 1.2 Hex Driver. > Tightening torque force : 5~10 N.cm. Abutment Screw Cover Screw Diameter Height Angulated Abutment Temporary Abutment Meta G UCLA Abutment Plastic UCLA Abutment Cemented Abutment > Packing unit : 1 Cover Screw. > To seal the conical interface of fixture. > Tightened with the 1.2 Hex Driver. > Tightening torque force : 5~10 N.cm. Replica Healing Abutment Diameter Length > Packing unit : 1 Healing Abutment. > For remodeling gingival contour during...

Cemented Abutment Meta G UCLA Abutment > Packing unit : 1 Meta G UCLA Abutment + 1 Abutment Screw. > For Screw-Cement or Screw Retained Prosthesis. > Modification to angulated abutment, customized abutment and telescopic abutment. > CCM alloy core for precise connection. > Cast with non-precious metal or gold alloy. > Connected with the Abutment Screw. > Tightened with the 1.2 Hex Driver and Torque Wrench. > Tightening torque force : 30 N.cm. > Fixture level impression. Type[Hex] Platform [Fixture Dia.] > Packing unit : 1 Cemented Abutment + 1 Abutment Screw. > Tightened with the 1.2 Hex Driver...

Replica Type[Hex] Prosthetic Procedure II Component Selection Guide for Shoulder Abutment > Packing unit : 1 Replica. > Mimicking of conical interface of fixture. > Analog of fixture for working cast. Pick-up Squared Impression Coping D Shoulder Positioning Cylinder > Packing unit : 1 Pick-up Squared Impression Coping + 1 Guide Pin. > Connected with the Guide Pin (Regular : UHR115 / Wide : UHW115). > For Open Tray Impression. > Tightened with the 1.2 Hex Driver and Torque Wrench. > Tightening torque force: 12~15 N.cm. Shoulder Abutment Cap Transfer Post Shoulder Abutment > Packing unit : 1 Transfer...

Shoulder Abutment Shoulder Impression Cap Type[Hex] Shoulder Abutment Diameter Diameter Height > Packing unit : 1 Shoulder Impression Cap. > Connected with the Shoulder Positioning Cylinder. > Confirm locking with abutment by rotation of clockwise and anti-clockwise direction. > Packing unit : 1 Shoulder Abutment. > For Cement Retained Prosthesis. > Dual anti-rotation grip for prevention of screw loosening. > Integrated with screw and abutment. > Tightened with the Shoulder Driver. > Tightening torque force : 30 N.cm. > Abutment level impression : Impression cap in platform Ø4.1 fixture and direct...

Ball Abutment Block-out Spacer Component Selection Guide for Ball Abutment Orange : 15N Block-out Spacer > Packing unit : 1 Ball Abutment + 3 Inner Caps (1 per each color) + 1 Block-out Spacer + 1 Outer Cap. > For Implant Supported Over-denture Prosthesis. > Tightened with the Ball Driver and Torque Wrench. > Tightening torque force : 30 N.cm. > Direct impression. Ball Abutment Diameter Height > Packing unit : 2 Outer Caps. Ball Inner Cap Block-out Spacer > Packing unit : 2 Block-out Spacers + 6 Inner Caps (2 per each color). > Retention force : Red 10N, Orange 15N & Green 20N. Ball Analog Diameter...

Cowellmedi Co.,Ltd Floor 6, Blue Fin Tower, 42, Seochojungang-ro,Seocho-gu, Seoul, Korea Tel. +82-2-3453-5085 Fax. +82-2-3453-5086 E-mail. [email protected] Cowellmedi USA INC 218 Trianon LN Villanova PA 19085-1442 USA Tel. 1-623-939-1344 Fax. 1-623-939-1472 Cowell R&D Institute 48, Hakgam-daero 221beon-gil, Sasang-gu, Busan, 46986, Korea Tel. +82-51-314-2028 Fax. +82-51-314-2026