video corpo

INNO Internal Impant
12Pages

{{requestButtons}}

Catalog excerpts

INNO Internal Impant - 2

INNO INTERNAL IMPLANT (Int.) System Flow Abutment Fixture Level Impression Pick-up Impression Coping Transfer Post Solid Positioning Cylinder Solid Plastic Coping Abutment Level Impression Impression Coping Shoulder Positioning Cylinder Sonator Analog Ball Analog Ball

Open the catalog to page 2
INNO Internal Impant - 3

Cowellmedi Co.,Ltd Floor 6, Blue Fin Tower, 42, Seochojungang-ro,Seocho-gu, Seoul, Korea Tel. +82-2-3453-5085 Fax. +82-2-3453-5086 E-mail. cib@cowellmedi.com Cowellmedi USA INC 218 Trianon LN Villanova PA 19085-1442 USA Tel. 1-623-939-1344 Fax. 1-623-939-1472 Cowell R&D Institute 48, Hakgam-daero 221beon-gil, Sasang-gu, Busan, 46986, Korea Tel. +82-51-314-2028 Fax. +82-51-314-2026

Open the catalog to page 3
INNO Internal Impant - 4

INNO Internal Impant (Int.) No-Mount Cuff 1.8mm fixture * Diameter Length Internal Fixture Surface Treatment : SLA-SH® > Packing unit : 1 Fixture + 1 Cover Screw. > Interchangeable with 1 staged internal fixture. > Internal Octa Connection (Taper 8°/ Octa 3.1). > No-Mount type. * Diameter Length * Diameter Length Type Internal Type Internal P=Cuff 1.8 body Taper body Taper Mount No-Mount Mount No-Mount INNO Fixture Code * Diameter Length

Open the catalog to page 4
INNO Internal Impant - 5

No-Mount Cuff 2.4mm fixture Cover Screw > Packing unit : 1 Fixture + 1 Cover Screw. * Diameter Length > Packing unit : 1 Cover Screw. > To seal the conical interface of fixture. > Tightened with the 1.2 Hex Driver. > Tightening torque force : 5~10 N.cm. Diameter Height * Diameter Length * Diameter Length Diameter Height Headless Screw > Packing unit : 1 Headless Screw. > For narrow mesio-distal distance. > Tightened with the 1.2 Hex Driver. > Tightening torque force : 5~10 N.cm. Healing Abutment > Packing unit : 1 Healing Abutment. > For remodeling gingival contour during soft tissue...

Open the catalog to page 5
INNO Internal Impant - 6

Cemented Extension Abutment Component Selection Guide for Cemented & UCLA Abutment Diameter Cuff Coping Screw Diameter Cuff Angulated Abutment Cemented Extension Abutment > Packing unit : 1 Cemented Extension Abutment + 1 Abutment Screw. > For Cement Retained or Screw-Cement Retained Prosthesis. > Cutting surface for anti-rotation of prosthesis. > Connected with the Abutment Screw (ISHR110). > Tightened with the 1.2 Hex Driver and Torque Wrench. > Tightening torque force : 30 N.cm. > Fixture level impression. Meta G UCLA Abutment Angulated Abutment Type Platform [Fixture Dia.]...

Open the catalog to page 6
INNO Internal Impant - 7

Prosthetic Procedure II Component Selection Guide for Solid Abutment > Packing unit : 1 Abutment Screw. > ISHR110 : Cemented Abutment. > ISHR100 : Angulated Abutment. > ISHR120 : Meta G Abutment. > Tightened with the 1.2 Hex Driver and Torque Wrench. (Crown) Solid Plastic Coping Platform [Fixture Dia.] Height H > Packing unit : 1 Replica. > Mimicking of conical interface of fixture. > Analog of fixture for working cast. Pick-up Impression Coping D Type Platform [Fixture Dia.] L Diameter Length > Packing unit : 1 Pick-up Impression Coping + 1 Guide Pin. > For open tray impression. >...

Open the catalog to page 7
INNO Internal Impant - 8

Solid Positioning Cylinder Platform [Fixture Dia.] Solid Abutment Diameter Diameter Height > Packing unit : 1 Solid Positioning Cylinder. > Inner cutting surface for anti-rotation on abutment. > Insert into the Impression Cap. > Packing unit : 1 Solid Abutment + 1 Abutment Cap. > For Cement Retained Prosthesis. > Cutting surface for anti-rotation of prosthesis. > Integrated with screw and abutment. > Tightened with the Shoulder Driver. > Tightening torque force : 30 N.cm. > Abutment level impression : Impression cap in platform Ø4.1 fixture and direct impression in platform Ø5.8 fixture....

Open the catalog to page 8
INNO Internal Impant - 9

Shoulder Abutment Platform [Fixture Dia.] Diameter Length Component Selection Guide for Shoulder Abutment > Packing unit : 1 Shoulder Abutment + 1 Abutment Cap. > For Cement Retained Prosthesis. > Dual anti-rotation grip with single crown for prevention of screw loosening. > Integrated with the Screw and Abutment. > Tightened with the Shoulder Driver. > Tightening torque force : 30 N.cm. > Abutment level impression. Shoulder Positioning Cylinder Shoulder Abutment Diameter Diameter Height > Packing unit : 1 Shoulder Abutment Cap. > Protection from cheek and tongue for gingival healing...

Open the catalog to page 9
INNO Internal Impant - 10

Component Selection Guide for Sonator Abutment Block-out Spacer Black Processing Male H-Type Inner Caps Block-out Spacer Black Processing Male Carrier Diameter Cuff Length 1.5 > Packing unit : 1 Sonator S Abutment + 1 Carrier + 3 H-Type Inner Caps + 1 Outer Cap + 1 Block-out Spacer + 1 Black Processing Male. H-Type Inner Caps NH-Type Inner Caps Ratchet Driver > For Implant Supported Over-denture Prosthesis. > Stable with low vertical height. > 6 kinds of the Inner Caps give various holding force (Both, H and NH-Type Inner Caps are used for the Sonator S Abutment). > Path compensation up to...

Open the catalog to page 10
INNO Internal Impant - 11

NH-Type Inner Cap Block-out Spacer Sonator S Ratchet Driver > Packing unit : 3 Block-out Spacers + 3 Inner Caps (1 Red, 1 Orange and 1 Green). > Path compensation up to 40° based on 2 implants. > Mainly used for the Sonator A Abutment. > Inner Caps : Inserted and Removed with the I&R Driver. > Used to tighten and untighten the Sonator S Abutment. Green : Orange : Red : Retention Force Retention Force Retention Force About 22N About 15N About 10N Sonator Impression Coping D Black Processing Male I & R Driver Diameter Length > Packing unit : 4 Impression Copings and 4 Black Processing Males....

Open the catalog to page 11
INNO Internal Impant - 12

Ball Abutment Outer Cap Component Selection Guide for Ball Abutment > Packing unit : 1 Ball Abutment + 3 Inner Caps (1 per each color) + 1 Block-out Spacer + 1 Outer Cap. > For Implant Supported Over-denture Prosthesis. > Tightened with the Ball Driver and Torque Wrench. > Tightening torque force : 30 N.cm. > Direct impression. Block-out Spacer Ball Abutment Diameter Height > Packing unit : 2 Outer Caps. Ball Inner Cap Block-out Spacer > Packing unit : 2 Block-out Spacers + 6 Inner Caps (2 per each color). > Retention force : Red 10N, Orange 15N & Green 20N. Ball Analog Diameter Length >...

Open the catalog to page 12

All Cowellmedi catalogs and technical brochures

  1. Diaderm® M

    3 Pages

  2. DIABONE

    3 Pages

  3. INNO-CaP

    3 Pages

  4. COWELL® BMP

    6 Pages

  5. Surgical Kit

    11 Pages