*mymedicalexpo

Catalogs
Cowellmedi
Multi S & A Abutment

Multi S & A Abutment

Product catalog summary

Introduction
The document outlines the INNO Implant System™ designed for AO4 and AO6 treatments, which support full dental arches on 4 or 6 implants. This system is aimed at rehabilitating patients with significant tooth loss, offering a cost-effective solution with immediate prosthesis placement. Despite its benefits, success depends on clinician expertise and patient-specific factors. The Multi S & A Abutment is highlighted for reducing product-related risks and enhancing clinical outcomes.

Features of Multi S & A Abutment
The abutment features a wide shoulder for easy positioning and increased fracture resistance. It is made from Grade 5 Titanium alloy and accommodates various placement angles. The Multi S Abutment is available in diameters of 4.5 and 5.5mm with cuff heights from 1 to 5mm, while the Multi A Abutment offers angle corrections of 15° and 30° with cuff heights from 2 to 5mm.

Component Overview
This section provides an overview of components like abutments, screws, protection caps, scan bodies, impression copings, and digital analogs, each facilitating different aspects of the implant procedure.

Component Selection Guide
The guide details the selection of components for scanning procedures, including Multi Scanbody and Digital Analog, and specifies the required tightening torque forces for proper installation.

User Manual
The manual offers instructions for using components like Multi S and A Abutments, emphasizing the importance of correct drivers and torque wrenches to ensure stability and longevity.

Specifications

The Angulated Screw Ratchet Driver prevents internal slip with a torque force of 30 N.cm (max 50 N.cm).
Components like Multi Polishing Protectors and Multi Meta G UCLA Cylinders are detailed with dimensions and uses.
The Torque Wrench allows torque control at 10, 25, 30, and 35 N.cm, with a max force of 120 N.cm.

Procedures

Installation involves removing the Cover Screw/Healing Abutment and selecting the appropriate abutment.
Impression methods include intra-oral and model scanning.
Prosthesis design involves selecting Ti-Base, designing, and milling from zirconia blocks.
Final delivery includes positioning the prosthesis and securing it with resin.

Clinical Applications

Instructions for digital procedures like intra-oral scanning and 3D model fabrication.
Handwork procedures for open/closed tray impressions are outlined.

Recommendations

Use the 1.2 Hex Ratchet Driver for component installation and removal.
Follow manufacturer’s instructions for scanning and model design.
Ensure proper torque settings to avoid component damage.

Prosthesis Fabrication and Delivery

Install Multi Meta G UCLA Cylinders and adjust the sleeve shape.
Fabricate a metal frame using pattern resin and wax-up techniques.
Fit the metal frame, seal screw holes, and apply opaque.
Arrange resin teeth, form gingiva, and obtain an occlusal index.
Apply heat curing resin, polish, and complete post-treatments.
Install the prosthesis using a 1.2 Hex Ratchet Driver and fill holes with resin.

Final Prosthesis Setting

Mill wax for prosthesis path, invest, and cast the copings.
Adjust and sandblast metal copings for bonding.
Apply opaque, carry out firings, and adjust the prosthesis.
Contour, glaze, and stain before final firing.
Install abutments using transfer jigs and complete the prosthesis.

Contact Information
Cowellmedi R&D Institute, Busan, Korea; Cowellmedi USA Inc., Villanova, PA, USA.

Catalog excerpts

INNO Implant System™ Multi S & A Abutment A total solution for AO4 and AO6 treatment

Open the catalog to page 1

INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment A TOTAL SOLUTION FOR AO4 & AO6 TREATMENT FEATURES OF THE MULTI S & A ABUTMENT THE MULTI S & A ABUTMENT AT A GLANCE COMPONENT SELECTION GUIDE · Multi S Abutment · Multi A Abutment · Abutment Screw · Multi Protection Cap · Multi Scanbody · Multi Pick-up Impression Coping · Multi Transfer Post · Multi Digital Analog · Multi SFIT S Ti-Base · Multi SFIT S Ti-Base Screw · Multi SFIT A Ti-Base · Multi SFIT A Ti-Base Screw · Multi SFIT Ti-Base Setting Screw · Multi Hybrid Ti-Base · Multi Titanium Cylinder · Multi Meta...

Open the catalog to page 2

INNO Implant System™ - Multi S & A Abutment INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment A total solution for AO4 and AO6 treatment A TOTAL SOLUTION FOR AO4 & AO6 TREATMENT SLA-SH® treated INNO implants including 16 and 18mm in length Digital planning & guided surgery using the COWELL® Digital Products The term of th AO4(All-on-4) and AO6(All-on-6) refers to all teeth being supported on the -on-4) n-4 be eing ants, ic 4 and 6 implants, a surgical and prosthetic procedure for tota rehabilitation of the total ts th ho f i edentulous patients or those with...

Open the catalog to page 3

INNO Implant System™ - Multi S & A Abutment INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment A total solution for AO4 and AO6 treatment FEATURES OF THE MULTI S&A ABUTMENT Increased fracture resistance due to thicker screw compared to others Short cone to facilitate limited interocclusal space Increased fracture resistance due to thicker screw compared to others Accommodates wide variability in placement angles Wide shoulder for easy positioning Made from a Titanium alloy Grade 5 for strength Made from a Titanium alloy Grade 5 for strength Multi S Abutment...

Open the catalog to page 4

INNO Implant System™ - Multi S & A Abutment INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment A total solution for AO4 and AO6 treatment Multi SFIT S Ti-Base Multi SFIT S Ti-Base Screw Multi SFIT A Ti-Base Multi SFIT A Ti-Base Screw Multi SFIT Setting Screw Multi Hybrid Ti-Base Multi Titanium Cylinder Multi Meta G UCLA Cylinder Multi Plastic UCLA Cylinder Multi Cylinder Screw 15 THE MULTI S&A ABUTMENT AT A GLANCE Multi Digital Analog Multi Transfer Post Multi Pick-up Impression Coping Multi Scanbody Multi Polishing Protector Abutment Screw THE MULTI S&A ABUTMENT...

Open the catalog to page 5

INNO Implant System™ - Multi S & A Abutment INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment A total solution for AO4 and AO6 treatment COMPONENT SELECTION GUIDE FOR THE MULTI S & A ABUTMENT Intra-oral scanning procedure COMPONENT SELECTION GUIDE FOR THE MULTI S & A ABUTMENT Model-scanning / handwork procedure Crown Crown Multi Polishing Protector Multi Polishing Protector (Hex) (N-Hex) Multi SFIT Ti-Base Multi SFIT S Setting Screw Ti-Base Multi SFIT Ti-Base Setting Screw Multi SFIT S Ti-Base Multi SFIT A Ti-Base Multi SFIT A Ti-Base Multi Hybrid Ti-Base...

Open the catalog to page 6

INNO Implant System™ - Multi S & A Abutment INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment A total solution for AO4 and AO6 treatment Abutment Screw Fixture Connection Height Diameter > Packing unit: 1 Abutment Screw. > To connect the Multi A Abutment. > Tightened with the 1.2 Hex Driver and Torque Wrench. > Packing unit: 1 Multi S Abutment. > For Screw-Retained Prosthesis. > Titanium base for the Multi SFIT S or A Ti-Base. > Gold color for more translucent restoration. > Library available for EXOCAD®, 3Shape® & others. > Integrated with the screw and abutment...

Open the catalog to page 7

INNO Implant System™ - Multi S & A Abutment INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment A total solution for AO4 and AO6 treatment Multi Pick-up Impression Coping D Multi SFIT S Ti-Base Type Multi S & A Abutment Diameter Diameter Height Multi S & A Abutment Diameter > Packing unit: 1 Multi Pick-up Impression Coping + 1 Guide Pin. > For open tray impression. > Connected with the Guide Pin (2SMGP012). > Tightened with the 1.2 Hex Driver and Torque Wrench. > Tightening torque force: 12~15 N.cm. > Packing unit: 1 Multi SFIT S Ti-Base + 1 Multi SFIT S Ti-Base...

Open the catalog to page 8

INNO Implant System™ - Multi S & A Abutment INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment Multi SFIT A Ti-Base A total solution for AO4 and AO6 treatment Multi S & A Abutment Diameter Type Diameter Ø5.7 Angulated Screw Ratchet Driver > Packing unit : 1 Multi Hybrid Ti-Base + 1 Multi Cylinder Screw. > For Screw-Cement or Cement Retained Abutment. > Titanium base for strength of CAD/CAM customized abutment or crown. > Gold color for more translucent restoration. > Cutting surface for anti-rotation of prosthesis. > Library available for EXOCAD®, 3Shape® &...

Open the catalog to page 9

INNO Implant System™ - Multi S & A Abutment INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment Multi Meta G UCLA Cylinder 1.2 Hex. L A total solution for AO4 and AO6 treatment Multi S & A Abutment Diameter Diameter Length > Packing unit: 1 Multi Polishing Protector. > To polish work during lab procedure. > Packing unit: 1 Multi Meta G UCLA Cylinder + 1 Multi Cylinder Screw. > Used over both Multi S or A Abutment. > For Screw, Cement or Screw-Cement Retained prosthesis. > Modification to various types of abutments. > CCM alloy core for precise connection. >...

Open the catalog to page 10

INNO Implant System™ - Multi S & A Abutment INNO Implant System™ - Multi S & A Abutment A total solution for AO4 and AO6 treatment A total solution for AO4 and AO6 treatment Multi S Machine Driver Height H Torque Wrench Machine KMMSD21L > Packing unit: 1 Multi S Machine Driver. > To install the Multi S Abutment by machine. > Packing unit: 1 Torque Wrench. > Torque control in all types of the SFIT Ti-Base installation. > Torque force 10, 25, 30 & 35 Ncm can be controlled by pulling the elastic bar. > Maximal torque force 120 Ncm with pulling the rigid main bar. Multi S Ratchet Driver H > Packing...

Open the catalog to page 11

All Cowellmedi catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list