SONATOR™ 80’s
1 / 16Pages

SONATOR™ 80’s Help your daily practice superior The Pioneers in Dental Implant & E.rhBMP-

INDEX Product Description Product Characteristics _ 3 Product Selection Guide ● For INNO SLA-SH® Submerged Fixture _ 4 For INNO SLA-SH® Internal Fixture _8 User Manual

Help your daily practice superior : Product Description Indications The SONATOR™ 80’s is a medical device and is designed for use with removable overdentures or partial dentures retained in whole or in part by endosseous implants in the maxilla and mandible. Contraindications Not appropriate where a totally rigid connection is required. Use on a single implant with divergence of greater than 40° based on 2 implants is not recommended. Not appropriate for fixed restorations. Single-Use Devices All components of the SONATOR™ 80’s except for Ratchet Driver and I&R Driver are single-use...

Help your daily practice superior : Product Characteristics • Available for INNO SLA-SH® Submerged Implant and Internal Implant. • Various sizes and shapes of SONATOR™ 80’s system allow to restore diverse clinical cases. • 6 kinds of Inner Cap allow various holding power. • Self-locating design of the SONATOR™ 80’s system allows dentures to easily and safely be seated. • Easy to place and remove male components with I&R Driver. • Retrofitting SONATOR™ 80’s to existing complete denture is possible. • Restorations are possible even in cases of limited space due to low vertical height. •...

Help your daily practice superior H-Type Inner Caps : For INNO SLA-SH® Submerged Fixture Black Processing male NH-Type Inner Caps Impression Coping Cover Screw Healing Abutmen

Help your daily practice superior Sonator S Abutment Black Processing male H-Type Inner Caps Diameter Cuff > For Implant Supported Over-denture Prosthesis > Packing Unit : Sonator S Abutment + Carrier + 3 H-Type Inner Caps + Outer Cap + Block-out Spacer + Black Processing Male > Stable with Low Vertical Height > 6 kinds of Inner Caps give various holding force(Both, H and NH-Type Inner Caps are used for Sonator S Abutment) > Path Compensation up to 40 ° based on 2 Implants > Carrier : Used for delivery of the abutment > Tightened with Ratchet Driver > Tightening Torque Force : 30N/cm >...

Help your daily practice superior Black Processing male > Packing Unit : 2 Outer Caps and 2 Black Processing Male > Black Processing Male: Inserted and Removed with I&R Driver H-Type Inner Cap Block Out Spacer > Packing Unit : 3 Block-out Spacers + 3 Inner Caps (1 Blue , 1 Pink and 1 White) > Path Compensation up to 40 ° based on 2 Implants > Mainly used for Sonator S Abutment > Inner Caps: Inserted and Removed with I&R Driver White : Pink : Bule : Retention Force Retention Force Retention Force About 22N About 15N About 10N NH-Type Inner Cap Block Out Spacer > Packing Unit : 3 Block-out...

Help your daily practice superior > Used to Tighten and Untighten Sonator S Abutment Ratchet Driver *Extra product *Extra product > Used to Tighten and Untighten Sonator A Abutment > Machine Drivers are used with Contra Angle and Ratchet Drivers are used with Torque Wrench Torque Wrench > Used with Ratchet Driver and 1.2 Hex Driver > Torque force at 10 / 25 / 30 / 35 Ncm to be controlled by pulling elastic bar > Maximal 120 Ncm torque force by pulling the rigid main bar Code > Used to Insert and Remove Inner Caps and Block Processing Mal

Help your daily practice superior H-Type Inner Caps : For INNO SLA-SH® Internal Fixture Black Processing male NH-Type Inner Caps Impression Coping Cover Screw Healing Abutmen

Help your daily practice superior Black Processing male Diameter Cuff Length 1.5 > For Implant Supported Over-denture Prosthesis > Packing Unit : Sonator S Abutment + Carrier + 3 H-Type Inner Caps + Outer Cap + Block-out Spacer + Black Processing Male > Stable with Low Vertical Height > 6 kinds of Inner Caps give various holding force (Both, H and NH-Type Inner Caps are used for Sonator S Abutment) > Path Compensation up to 40 ° based on 2 Implants > Carrier : Used for delivery of the abutment > Tightened with Ratchet Driver and Torque wrench > Tightening Torque Force : 30N/cm > Abutment...

NH-Type Inner Cap Block Out Spacer Help your daily practice superior > Packing Unit : 3 Block-out Spacers + 3 Inner Caps (1 Red , 1 Orange and 1 Green) > Path Compensation up to 20 ° based on 2 Implants > Mainly used for Sonator A Abutment > Inner Caps : Inserted and Removed with I&R Driver Green : Orange : Red : Retention Force Retention Force Retention Force About 22N About 15N About 10N Impression Coping > Packing Unit : 4 Impression Copings > Abutment Level Pick-up Impression > Connected over Sonator Abutment after Placing Block-out Spacer > For Close Tray Impression > Packing Unit : 4...

Torque Wrench > Used with Ratchet Driver > Torque force at 10 / 25 / 30 / 35 Ncm to be controlled by pulling elastic bar > Maximal 120 Ncm torque force by pulling the rigid main bar Code Help your daily practice superior > Used to Insert and Remove Inner Caps and Block Processing Male

Help your daily practice superior : User Manual 1. Primary Impression and Study Cast Fabrication Deliver the Sonator S Abutment with the Carrier from the oral cavity and tighten using the Ratchet Driver and the Torque Wrench (For the Sonator A Abutment, use 1.2 Hex driver) Inject stone and take the cast after the stone has hardened Connect the Impression Coping Take impression using ready-made tray after injecting impression material Take the impression body from the oral cavity and insert the Lab Analog Fabricate the individual tray Remove the tray from the study cast and clean the was in...

Help your daily practice superior : User Manual 3. Final Impression Adapt the individual tray in the oral cavity Apply adhesives in the tray Take the final impression Remove the tray from the oral cavity Connect the Impression Coping and apply impression material around the Impression Coping connected with the Sonator Abutment Apply impression material in the tray 4. Working Cast Fabrication Connect the Lab Analog with the Impression Coping inside the impression body Fabricate denture according to the working cast Inject stone into the impression body ※ A metal frame to strengthen...