MetraSCAN 3D Scanner for Quality Control & Reverse Engineering
2Pages

TECHNICAL SPECIFICATIONS METROLOGY SOLUTIONS (1) Typical value for diameter measurement on a calibrated sphere artefact. (2) Based on the ASME B89.4.22 standard. The probe of the HandyPROBE Next is located within a conical socket: Individual points are measured from multiple approach directions. Each individual point measurement is analyzed as a range of deviations in X, Y, Z (value = range/2). (3) Based on the ASME B89.4.22 standard. Performance is assessed with traceable length artefacts by measuring these at different locations and orientations within the working volume of the C-Track (value = maximum deviation). (4) The volumetric accuracy performance of the HandyPROBE Next/MetraSCAN 3D is dependent on the working volume in which the measurement is made: 9.1 m3 or 16.6 m3. DISCOVER THE BEST MEASURING ARM. YOURS. I I • • CREAFORM AMETEK GmbH Division Creaform Deutschland Meisenweg 37 D - 70771 Leinfelden-Echterdingen T. + 49.711.1856.8030 | F. + 49.711.1856.8099 germany@creaform3d.com | creaform3d.com VMETEK' ULTRA PRECISION TECHNOLOGIES Authorized Distributor CREAFORM VMETEKULTRA PRECISION TECHNOLOGIES HandyPROBE, HandyPROBE Next, C-Track, MetraSCAN 3D, MetraSCAN 350, MetraSCAN 750, and their respective logos are trademarks of Creaform Inc. © Creaform Inc. 2019. All rights reserved. V1

The HandyPROBE Next™ portable optical CMM provides measurement accuracy that is insensitive to the instabilities of any environment. Free of any rigid measurement setup, the part, optical tracker and wireless probe can all be moved at any time during the measurement sequence. Specifically designed for use on the shop floor, the system offers unmatched flexibility and a wider measurement volume than other portable CMMs. Free of any rigid measurement setup, the MetraSCAN 3D™ optical CMM scanner provides shop floor measurement accuracy that is insensitive to the instabilities of the...