Hybrid Implant System ACTIVE STABILIZATION" :ents Pend

OVERVIEW AC TIVE STABILIZ ATION ™ The DynaFORCE® Active Stabilization™ System is the first to offer a hybrid implant system designed to address the most common rearfoot, midfoot and forefoot corrective procedures by combining plate stability with active compression of our clips. Bending & Rotational Stability Continuous Compression & Active Gap Recovery Active Stabilization™ PRODUC T FEATURES Low Profile Implants Ability to Reposition Intraoperatively Full Gap Recovery and Rotational Stability Sterile Instrumentation with EcoSMART® Service T/N Fusions simplified with Active Stabiliza

T E S T I N G DATA GAP RECOVERY The DynaFORCE® Active Stabilization™ system presented less gapping and leading competitors. INITIAL GAP WITH LOAD full gap recovery compared to ROTATIONAL STABILITY DynaFORCE® 4-Hole Plate + Clip The DynaFORCE® Active Stabilization™ systems have higher torsional stability compared to competitive systems. COMPETITIVE PLATE + 4.0 LAG SCREW DYNAFORCE 4-HOLE PLATE + CLIP DYNAFORCE Z-PLATE + CLIP

SURGICAL TECHNIQUE STEP Use template to confirm proper plate size. Place temporary holding wires to secure plate. Use provided instruments to prep for the DynaFORCE® clip. 18mm DynaFORCE® Clip through the plate. Rotate the knob counterclockwise until pressure is released, then rotate the inserter counterclockwise until the clip releases. Note: A tamp is available if needed. Drill and prep for screws. Non-locking

INSTRUMENTS INCLUDED IN EACH KIT Instrumentation is packaged in sterile kits for efficiency and convenience. After surgery, the instrumentation is returned to CrossRoads® via the EcoSMART® Instrument Recovery Service providing a significant cost savings over typical disposable instrument kits. E Depth Gauge Probe H Locking Drill Guide (2) I Non-Locking Drill Guide

Z-ALPHA PLATE Z-BETA PLATE Part Number Acceptable Clip Size(s) Slot Length / Clip Size Overall Length(s) Thickness Part Number Acceptable Clip Size(s) Slot Length / Clip Size Overall Length(s) Thickness 5-HOLE PLATE 4-HOLE PLATE Part Number Acceptable Clip Size(s) Slot Length / Clip Size Overall Length(s) Thickness Part Number Acceptable Clip Size(s) Slot Length / Clip Size Overall Length(s) Thickness * Screw hole with compression slot only accepts non-locking screw. ** All DynaFORCE© plates use MotoBAND CP locking/non-locking screws ■■CrossRoads H Extremity Systems 6055 Primacy Parkway, Suite...