*mymedicalexpo

STEP IMPLANT SYSTEM

Product catalog summary

Overview
The DynaFORCE® Step Implant System provides continuous compression and is available in a sterile pack with a range of sizes: 4mm, 6mm, 8mm, 10mm, and 12mm. It features an 18mm interaxis and is designed for efficient surgical procedures.

Product Features

Continuous compression nitinol implant
Simple and efficient surgical technique
Sterile stainless steel instrumentation with EcoSMART® service

Surgical Technique

Step 1: Incision and Exposure - Make an incision lateral to the calcaneus, parallel to the peroneal tendons, and expose the calcaneus while protecting the sural nerve.
Step 2: Osteotomy - Perform an osteotomy through the calcaneus using a saw, with optional use of a CrossRoads cut guide.
Step 3: Drill Fixation Hole - Ensure the posterior fragment is flush and drill the fixation hole using the provided guide.
Step 4: Determine Step Height - Use the depth gauge to determine the proper step height for the implant.
Step 5: Insert Step Staple - Insert the appropriate sized implant and adjust as necessary.
Step 6: Repeat Steps - Repeat for additional fixation points.

Instrumentation
Each kit includes sterile-packaged instruments such as a drill bit, universal threaded handle, depth indicator/tamp, fixation pins, standard step clip, drill guide, and drill/cut guide. The EcoSMART® Instrument Recovery Service offers cost savings by returning instruments post-surgery.

Specifications

Part numbers vary by size, with both single pack and kit options available.
All sizes have an 18mm interaxis, 24mm anterior leg length, 22mm posterior leg length, and a 3.2mm reamer size.
Max clip thickness is 2.72mm, leg width is 1.78mm, and bridge height is 1.52mm.

Disclaimer
Surgeons should use their professional judgment when using the product. CrossRoads does not provide medical advice and recommends training prior to use.

Catalog excerpts

OVERVIEW D Y N A F O R C E® S T E P S Y S T E M The DynaFORCE® Step system offers the benefits of continuous compression and comes sterile packed with a broad size range. P R O D U C T F E AT U R E S Continuous compression nitinol implant Simple and efficient technique Sterile stainless steel instrumentation with EcoSMART® service AVA I L A B L E S I Z E S The DynaFORCE® Step system is available in five offsets with an 18mm interaxis.

Open the catalog to page 2

SURGICAL TECHNIQUE Drill Fixation Hole An incision is placed lateral to the Using a saw, make an osteotomy Insure posterior fragment and calcaneus, parallel to the peroneal through the calcaneus across to the drill guide is flush to anterior tendons. Dissect the soft tissue and opposite cortex. calcaneous. Use the provided drill Option: CrossRoads cut guide provided to guide to drill fixation hole in the Note: Make sure to identify and protect the pre-set anterior holes and provide guide posterior fragment. sural nerve. for saw. Leave positioning pins in place to identify fixation holes. Caution:...

Open the catalog to page 3

INSTRUMENTS INCLUDED IN EACH KIT Instrumentation is packaged in sterile kits for efficiency and convenience. After surgery, the instrumentation is returned to CrossRoads® via the EcoSMART® Instrument Recovery Service providing a significant cost savings over typical disposable reusable instrument kits DynaFORCE® Step Sterile Pack Prep Kit (7200-stbp) Drill Bit Universal Threaded Depth Indicator PART NUMBER (single pack) PART NUMBER (kit1) INTERAXIS LENGTH ANTERIOR LEG LENGTH POSTERIOR LEG LENGTH REAMER SIZE MAX CLIP THICKNESS LEG WIDTH BRIDGE HEIGHT 6055 Primacy Parkway, Suite 140, Memphis, Tennessee...

Open the catalog to page 4

STEP IMPLANT SYSTEM

STEP IMPLANT SYSTEM

Catalog excerpts

All CrossRoads Extremity Systems catalogs and technical brochures