CryoALP_TechnicalFeatures
1 / 7Pages

TECHNICAL FEATURES

Dimensionalcharacteristics External Dimensions • Width front door : 896 mm • Width technical door : 560 mm Room's features for storage • Temperature of the room : from -20°C to +60°C CRYOECO - User’s manual - Installation requirements

Single-phase power supply Three-phase electrical supply Weight Weight of the cabin without patient : 710Kg Weight cabin front block : 360Kg Weight cabin rear block : 350Kg • Line voltage : 240V AC mono • Differential protection : 32A (D curve breaker) • Line voltage : 400V AC Tetrapolar 3PH + N + Terre • Differential protection : 16A (D curve breaker) CRYOECO - User’s manual - Installation requirements

Dimensions of the chamber • Height : 2,000mm Room's features receiving • The temperature of the room must be between 18°C and 23°C • Optimal humidity level : 30% • Extraction unit on the front if separation front/rear blocks : 30m3/h • Extraction unit on the front if separation front/rear blocks : 90m3/h CRYOECO - User’s manual - Installation requirements

CRYOECO water-cooledCharacteristics of the CAP(type Aermec ANL041 or equivalent) • Operating temperature range: 18°C to 23°C • Optimum humidity rate: 30% • Cooler inlet temperature: 10°C • Noise: 65dB (Aermec compressor data) • Buffer tank (integrated or not): 50 Litres Take note that the mono chamber's connection on the water-cooled unit will take place at the rear side of the device on the bottom left. See hereunder the positioning. CRYOECO - User’s manual - Installation requirements

CRYOECO air-cooled • Rear ventilation of the room : Mini 6 000m3/h • Air conditioning for the room’s cooling : 7kW cold • Maximal temperature of the room : 23°C Cooling should be done as an extension of the 4 fans at the bottom left of. machine. CRYOECO - User’s manual - Installation requirements

+33 7 43 39 10 43 zb@cryomanufacturing.com 10-12 route de Brie Comte Robert 94520 PERIGNY- SUR-YERRES www.cryomanufacturing.com