PAL Purge and Trap

Product catalog summary

Introduction
Purge and Trap (P&T) is a well-established method since 1974 for analyzing volatile compounds with trace level sensitivity. It is widely used in environmental assessments and various water analyses. Traditional P&T setups have limitations such as inflexibility, laborious routines, and high costs.

PAL Purge and Trap Solution
The PAL Purge and Trap system addresses these limitations by integrating P&T methods and data processing with GC/MS using a single sample list. It offers full network capabilities and can run multiple methods on the same instrument, such as static and dynamic headspace, SPME fiber, Arrow, or liquid injection. The PAL Dilutor automates P&T calibrations using standards like EPA MegaMix®.

Key Features

High degree of automation
Multi-point calibrations
Method flexibility for SPME, Headspace, Liquid
User-friendly for both routine and expert users
Standalone or GC mounted for a small footprint
Reliable workflows

CDS 7000C Specifications

Pressure transducer for leak checks
Programmable times: 0–999.9 minutes
Trap dimensions: 0.3 cm OD x 28.5 cm Length
Transfer Line: 1.5 m stainless steel clad fused silica
Desorb pre-heat option
Maximum Operating Temperatures: Valve oven 350°C, Transfer Line 350°C, Wet Trap 300°C, Adsorbent Trap 300°C
Weight: 9.5 kg / 21 lbs
Dimensions: 18 cm W x 50 cm H x 33 cm D

CDS 7000C Options

Hot water rinse module
Heated sparge vessel module
Electronic mass flow controller
ISTD addition module

Software and Automation
The PAL P&T Plugin Software integrates seamlessly with existing instruments, enhancing productivity. The PAL Sample Control acquisition software boosts productivity by closing gaps in P&T automation, method design, and analysis.

Conclusion
The PAL Purge and Trap system with CDS 7000C offers a modern solution to traditional P&T limitations, providing flexibility, automation, and ease of use for various analytical applications.

Catalog excerpts

PAL Purge and Trap with CDS 7000C The Comprehensive Purge & Trap Solution

Open the catalog to page 1

PAL Purge and Trap with CDS 7000C Transforming Purge and Trap from tradition to present-day analytics Purge and Trap (P&T) is well-established since 1974 for analysis of volatile compounds with trace level sensitivity. Research and contract labs rely on P&T for environmental assessment, waste water, drinking water or beverage analysis applications, and worldwide applied protocols (DIN-EN ISO 15009; US-EPA 500-, 8000-series...). However, the P&T setups have evolved so far with several downsides of inﬂexible setups, laborious daily routines, and high running costs on one dedicated instrumentation...

Open the catalog to page 2

Waste Gas CDS 7000C P&T Industry Workhorse Highest Analytic Performance PAL Automated, incl. Leak Check, Wet Trap, Foam Sensor... CDS 7000C Specifications Pressure transducer for leak check Programmable times: 0- 999.9 minutes Trap: 0.3 cm OD x 28.5 cm Length Transfer Line: 1.5 m stainless steel clad fused silica Desorb pre-heat option Maximum Operating Temperatures Vocarb or Tenax Adsorbent Trap Weight: 9.5 kg / 21 lbs 18 cm W x 50 cm H x 33 cm D (7" X 19.5" X 13") • Valve oven 350°C • Transfer Line 350°C • Wet Trap 300°C • Adsorbent Trap 300°C CDS 7000C Options • Hot water rinse module • Heated...

Open the catalog to page 3

For more information on the PAL System visit: www.palsystem.com 0SI0si PAL is a registered trademark of CTC Analytics AG, Switzerland Part No. PAL Broch-Purge&Trap | Rev 1 - February 2017

Open the catalog to page 4

PAL Purge and Trap

PAL Purge and Trap

Catalog excerpts

All CTC Analytics AG catalogs and technical brochures