Cubic OEM&ODM Solutions for Medical and Healthcare Cubic Sensor and Instrument Co., Ltd.
Open the catalog to page 1Cubic Sensor and Instrument Co., Ltd. (hereinafter referred to as "Cubic") is a publicly listed company in SSE STAR Market (stock code:688665), specializing in smart gas sensors and superior gas analyzers. Set up in 2003, situated at "Optics Valley" of Wuhan, China, Cubic has established gas sensing technology platforms including optical technologies (NDIR, Ultraviolet, Light Scattering, Laser Raman), ultrasonic technology, MEMS metal oxide semiconductor (MOX) technology, electrochemical technology, ceramic thick-film technology based high temperature solid electrolyte technology and so on. At...
Open the catalog to page 2Ejj Sensing Technology Platforms 22 Years 22 years of development and application of NDIR technology 17 years of development and application of Ultrasonic technology 15 years of development and application of Light scattering technology 7 years of development and application of TDLAS technology Total 233 patents obtained
Open the catalog to page 3Ultrasonic NDIR Calibration TDLAS NDIR Ultrasonic Spirometer DLCO Sensor Syringe 02 Sensor C02 Sensor Flow Sensor
Open the catalog to page 4W OEM/ODM Capability In-house Developmentand Manufacturing of Core Gas Sensors and Components Hardware/Structural Design Prototype Testing/Validation Optimized Supply Chain Integration
Open the catalog to page 5| Pulmonary Function TestSolutions Calibration Syringe
Open the catalog to page 6| Ultrasonic Spirometer Applications ■ Pulmonary Function Tests Introduction Handheld Pulmonary Function Spirometer adopts ultrasonic gas flow sensor to measure body's respiratory and inspiratory function. It can convert the patient breathing signal into electrical signal which is sent to corresponding signal processing circuit, to display real-time respiratory flow curve and then to calculate a variety of physiological and spirometric parameters. It can be used to monitor static vital capacity,forced vital capacity and maximum voluntary ventilation rate. And the matched software can automatically...
Open the catalog to page 7Product Components Medical device (with sensor), breathing mask, ventilation tube accessories, Rafi tube accessories (Model: THR-3.0-600/P6), hose and airway accessories, Luer connector accessories. Ventilation Function ±3%or±0.05L, take the maximum ofthetwo Applicable under the following conditions: VC (Vital Capacity) Accuracy Ambienttemperature: 5°CtoA0°C Relative humidity: 30% RH to 75% RH Atmospheric pressure: 850 hPa to 1060 hPa VC (Vital Capacity) Repeatability Reading error <0.05 Lor within 3%> of the average reading FVC Accuracy: ±3%or±0.05L, take the maximum ofthetwo Applicable under...
Open the catalog to page 8@ Sensor Specifications Ventilation Function Flow Accuracy ±10%or±10L/min(±0.17L/s),take the maximum ofthetwo Flow Linearity The average error difference between two consecutive flow tests must not exceed 5% of the larger flow value. Flow Repeatability Flow resistance Frequency Response Volume Range Volume Accuracy Working Conditions Relative humidity Volume Linearity ±0.17 L/s or within 10% of the average reading,take the maximum of the two ^0.35kPa/(L/s) ^15L/min(0.25L/s) or 12%, take the maximum ofthetwo 0-12L ±3.0%or±0.05L, take the maximum ofthetwo AmbientTemperature: 5°C-40°C Volume Repeatability...
Open the catalog to page 9Applications Pulmonary FunctionTestSysterm Gasboard-2051 gas sensor for CO, CHa and CO2 concentration measurements which is based on non-dispersive infrared technology,it uses an ultra-fast modulation frequency and a special detection circuit to achieve the fast response, high accuracy, excellent stability and anti-interference abilities during lung diffusion function tests. With microcontroller processing, it offers gas sampling, signal processing, sensor calibration and measurement output, and realizes the fast and accurate measurement of the ultra-low range gas CHa, CO based on the ATS/ERS...
Open the catalog to page 10Applications ■ Routine Automatic Calibration and Inspection of Lung Function Analyzer Introduction The Syringe is mainly used forthe routine calibration and inspection of the Lung Function Analyzer, which is easy to operate by driving the low traction piston with motor and shows high accuracy and sealing. The 3 liter calibration Syringe comply with quality standards which supports volume calibration and linear verification of three flow rates. Working Temperature Storage Temperature Storage Relative Humidity Accuracy complied with standard JJF1213-2008 for Lung Function Analyzer * Please read...
Open the catalog to page 11| CPET& Metabolism Test Solutions
Open the catalog to page 12The Cubic Metabolism Analyzer measures essential metrics such as metabolic rate, fat-burning rate, carbohydrate metabolism, and energy expenditure. By gaining insights into these key factors, individuals can better understand their nutritional intake and consumption patterns, empowering them to make more informed decisions about their diet and exercise routines. The Cubic Testing System includes an 02and C02 concentration gas analyzer, a flow rate sensor, and a respiratory mask for comprehensive metabolic testing. It operates on a Microsoft Windows 7 SP1 platform and can be connected to a printer...
Open the catalog to page 13Applications ■ Cardiopulmonary exercise test ■ Animal and plant monitoring and control By leveraging Tunable Diode Laser Absorption Spectroscopy (TDLAS) technology for 02 concentration measurement, Non-Dispersive Infrared (NDIR) technology for CO2 concentration measurement, Gasboard-2511 achieves precise measurements of 02 and CO2 concentrations in real time. Gasboard-2511 could reach measurement range of 0%~100% level for 02, and 0%~10% for CO2 with resolutions up to 0.01% to realize high accuracy and excellent repeatability. It is also compatible for other gas measurements by changing the light...
Open the catalog to page 14The sidestream ETCO 2 sensor adopts non-dispersive infrared (NDIR) technology for accurate carbon dioxide concentration measurement. Applicable for use in patient monitors, metabolism analyzers, cardiopulmonary exercise testing (CPET) systems, and other medical equipment. Key features include high measurement accuracy, excellent temperature stability, low power consumption, fast response time, compact structure, and easy installation. Detection Principle Data Output Detection Range Resolution Resolution Detection Accuracy Respiratory Frequency Range Respiratory Frequency Accuracy Average Current...
Open the catalog to page 151 Page
3 Pages
1 Page