UHD+ 3 x 2 Matrix with PiP FEATURES • • • • This 3 by 2 Matrix is a high performance switch with integrated scaling and multi-windowing technology. It is an ideal solution for monitoring or displaying multiple medical sources such as endoscope, X-Ray system, ultrasonic, Da Vinci Surgical System…etc. simultaneously during operation or diagnosis. Video resolutions (SDI & HDMI) up to 4K@60Hz and LPCM audio up to 7.1 channels and 192kHz are supported on both input and output and this unit is fully compatible with the HDCP 2.x standards. Any of 3 different HDMI sources may be displayed individually, full screen, or they can be displayed using a variety of multi-window modes including PiP, PoP, Side-by-Side, Auto display with the output being sent to general HDMI display and 3D Smart Glasses. Management of input/window routing, position and sizing can be controlled easily by use of the front panel controls as well as by WebGUI, RS-232, Telnet, options. Supports SDI output distance up to 60 meters, HDMI input/output with 18Gbps (600MHz) 4K UHD Seamless switching (no loss of sync to display) when switching sources in 3x2 matrix mode Supports PiP (Picture-in-Picture), PoP, Side-by-Side and Auto display options with independent audio source selection Supports the ability to store a multi-window arrangement as a preset that can be recalled later Each window can have a border with a selectable color EDID management Uploadable and freely positioned graphic logo support Supports easy adjustment of window size, position and settings in the PiP windowing mode via the WebGUI Controllable via front panel buttons, WebGUI, Telnet, RS-232 SPECIFICATIONS Interfaces Input Port Output Port Control I/O Service Port PANELS Front View Rear View Enclosure Chassis Material Chassis Color Dimensions (W×H×D) Power Supply Output Signal Type Power Power Supply Power Consumption HDMI Input Video HDMI Compliance HDCP Compliance Input Signal Type 1 SDI 1 HDMI (Type-A) 1 DVI-I 1 HDMI 1 USB-C 1 IP Control (RJ-45) 1 Host Control (Micro USB) 1 USB (Type-A) HDMI 2.0 (DVI 1.0) 2.x SDI 4096×2160p@60 YUV 4:4:4 HDMI 4096×2160p@60 RGB 4:4:4 DVI-I 1920x1080p@60 RGB 4:4:4 HDMI 4096×2160p@60 RGB 4:4:4 USB-C 4096×2160p@60 RGB 4:4:4 24V/2.7A (Locking) 22W Metal (Steel) White 231.5mm×25mm×108mm [Case Only] 231.5mm×25mm×116mm [All Inclusive] 671g Field Firmware Update USB Flash Drive, WebGUI ORDERING INFORMATION HDMI Output HOST Output Product Description UHD+ 3 x 2 Matrix with PiP USB-C Output HDMI TV/Display CYPRESS TECHNOLOGY