AD4412-CW
6Pages

Check Weighing Indicator 7” high-visibility touch panel color LCD Up to 1,000 registered items 4000 times/second high-speed sampling A/D resolution 16,000,000 counts

Check Weighing Indicator Feedback control Three types of weighing modes: Passing, Stopping, and Static Weighing Reports for operational history, weighing history, histogram, control charts, and summary reports. Display various data on smartphones and tablets over wireless LAN during measurement. Item photo import from a USB Flash Drive Easy setting restoration using a USB Flash Drive. Save data to a USB Flash Drive and import it to personal computer. Dust/water protection for the IP65 display when mounted on a panel with OP-10. Wireless LAN* Start/Stop switch RS-485, photo sensor power...

Photo sensor (power supply 12V and signal input) Modbus TCP Postscript laser printer Feedback control EMERGENCY Barcode reader item setting Rotating light Filling and packing machine Warning light Emergency stop button Data Output via Wireless LAN* The measurement results, setting conditions, and statistical data can be checked at any time without stopping the checkweigher. The X control chart and R control chart can be used to understand the trends of measurement values, and check the effect of feedback control. *Wireless LAN can be used depending on the regulations of your region....

Histograms, Control Charts, and Summary Reports After weighing, press the PDF key on the summary display. A PDF report is output to a USB Flash Drive. The same reports can be printed out by pressing Histogram printing example the PRINT key when a PostScript printer is Print date and time Frequency distribution Frequency distribution Control chart printing example Summary results printing example Print date and time Print date and time Dump Print Printing Sample Character specications Printing speed Paper feeding speed Number of characters printed Printer paper width 7 9 dots, 1.6 (W) 3.2...

Applications RS-232C (item setting) Postscript printer Histograms, control chars, and summary reports Reject signal (control I/O) Barcode reader Rejector Photoelectric sensor Load cell Load cell G feedback control Filling machine HMI Target 1000g High limit 10g Low limit 5g Feedback signal output (control I/O) G Conveyor speed control The conveyor speed can be changed automatically for each item 4-20mA or 0-10V Load cell G Item is set in the barcode reader RS-232C (item setting) Barcode reader Settings change to the item type of the number read by the barcode reader.

Temperature coecients Nonlinearity Sampling rate A/D resolution Number of digits Display I Registered items Registered items I General specications Power source voltage Operating temperature Operating humidity Dust/water protection Communication interface Control I/O Power supply for photo sensor Over 0.15µV/d (d=minimum division) –35mV to +35mV (–7mV/V to +7mV/V) DC 5V 60mA up to 4 load cells (350Ω) Remote sensing function included Zero: ±0.02µV/˚C (Typ.) Span: ±3ppm/˚C (Typ.) 0.005% of F.S. 4000 times per second Approx. 16,000,000 Relay output 9 points DC40V 50mA Parallel I/O DI 16 points...