CE Certified manufacturer of 3D printing resins

Our Back Story D-Tech was born in the year 2000 with a small line of dental cements. We started with a humble beginning and this was followed by a period of slow, albeit steady growth until 2015. Since 2015 we have shifted gear and invested significantly in technology, research and infrastructure. Our research has resulted in the production of several high - performance UV cured 3D printing resins which are now selling successfully in several parts of the world. At team D-Tech we believe that "the future of dentistry is digital". Several conventional dental work flows "are being" or "have been"...

Model Pro BEIGE / GREY INDICATIONS FOR USE 3D Accuprint Model Pro resin is a “specially for prosthetics “ formulation for printing highly accurate master models. Ideal for printed removable dies which is a great time-saver. The colour and surface of this resin mimics die stone, resulting in pleasant haptics • Very High Accuracy * Ideal for Master Models & Removable Dies * Die Stone like pleasant Haptics & Sandy Beige Colour • Does not contain MMA BEST FOR MASTER MODELS TECHNICAL DATA PACKAGING lOOOg Bottle Net Scratch Resistant High Strength Model Standard grew beige INDICATIONS FOR USE 3D Accuprint...

<>d-tech3D ACCUPRINT™Model Basic grey INDICATIONS FOR USE 3D Accuprint Model Basic Is a low viscosity resin that can be used in both DLP & LCD printers. It is quite economical and yet reasonably accurate. It can be effectively used in DLP printers as well as high & moderate intensity LCD printers. • Captures fine detail • Can withstand thermoforming forces TECHNICAL DATA Colour Grey PACKAGING lOOOg Bottle Net Low viscosity High Detail Hollow Model Thermoforming Model Hard ivory INDICATIONS FOR USE 3D Accuprint Model Hard resin is designed especially for printing low -cost hollow models which...

3D Accuprint Cast resin is a specifically formulated, ash free resin, for printing high strength patterns. This ensures no deformation post printing which results in highly accurate “first time right” dental castings. Castable resin is suitable for pressable Lithium disilicate Ingots or any injectable material. • Results in Perfectly Fitting Castings • Rigid pattern prevents deformation during investing • Does not contain MMA & THF-MA TECHNICAL DATA Colour purple-translucent PACKAGING lOOOg Bottle Net \ 1/ /* \ Low shrinkage Easy to cast Surgical Guide INDICATIONS FOR USE 3D Accuprint Guide resin...

Crown & Bridge INDICATIONS FOR USE 3D Accuprint C & B resin is a biocompatible highly aesthetic formulation with inert fillers. It mimics tooth like aesthetics. • High strength • High polishability for tooth like aesthetics • Biocompatible tooth coloured filled resin for provisionals • Can be finished with D Tech Pro Glaze, a Nano filled Light activated glazing system TECHNICAL DATA * Compressive strength * Flexural Strength * Strength values depend upon adhering to recommended printing and post curing protocol indirect Use Only MD NANO FILLED LIGHT ACTIVATED ONE FOR ALL" GLAZING SYSTEM 3D Accuprint...

3D Accuprint Denture resin Is designed especially for printing denture bases. It has a high surface cure and can be polished to high aesthetics. • Enhanced surface cure • Available in light and dark pink TECHNICAL DATA Flexural Strength Light,Dark Pink 385~405 Low > lOOmpa High polishability Low watersorption Splint Resin D Tech Accuprint Splint resin is available in two versions, Splint Hard & Splint Soft. Both resins are designed for better results on DLP 385nm wavelength systems. • Splint hard can be polished to a very high gloss and extreme clarity. • Splint soft is translucent and retains...

SECTION: MODEL RESINSQ: What are the main differences in your various model resins - Model Pro, Model Standard .Model Basic & Model Hard? • Top of the line resin for Master Models with removable dies • "Matt" diestone like Haptics. Q: Are your resins compatible with all 3D printers ? A: Yes, our resins work on all" open printers". We always recommend to buy open printers. For dental use we recommend quality printers like Asiga (DLP/385nm) and Ackuretta (LCD /405nm). Our resins are officially validated on both. *ACKURETTA □ Tech resin profiles are available in Ackuretta Alpha Al slicing software:...

A: After printing, post curing and cleaning up the pattern, please invest using a High temperature rapid Investment For example Brevest, Germany, Rapid 1 investment material. Vacuum mixing is strongly recommended. We also recommend (optional) that you use a pressure chamber to harden the investment. The burnout cycle that we recommend is 925°C with 35 mins of holding. Please use a good ventilated burnout furnace for example Nabertherm/Renfert D Tech Surgical guide resin has a unique feature of colour change. After printing it is pale yellow. After post curing it turns orange translucent .Finally...

Factory & Capacity We have recently completed an additional state of the art facility for production and R&D of 3D printing resins. With this added capacity we can produce up to 300 Tons of 3D resins peryear. OUR CHEMISTRY IS GUIDED BY THE PRINCIPLES OF SAFETY AND STABILITY Unlike some low cost manufactures we do not use aggressive acrylates or products containing VOCs. All the materials are chosen with care with due attention to safety and quality. Final formulations have low water sorption and therefore remain stable over time after printing. This is critical since models and prosthesis need...

od-techJ D-Tech Dental Technologies ■ Reality warehousing, Gat No 1337/1, Pune Nagar Road, Wagholi, Pune 412207,INDIA