*mymedicalexpo

venTest

Product catalog summary

Overview: The venTestTM is a compact and efficient system designed for testing the performance of ventilators and anaesthetic systems. It features a 7-inch touch screen display for on-board data analysis and waveform display, eliminating the need for a laptop.

Key Features:

7” capacitive widescreen display with LED backlight.
Intuitive graphical interface for device measurement.
FlowSense bidirectional airflow sensor with two ranges (±300 L/min or ±12 L/min).
Automatic flow sensor detection and simultaneous display of two measured curves.
Configurable display of 11 numeric parameters.
Optional oxygen and anesthetic gas measurement capabilities.
User-configurable test setups with external memory options (SD card or USB).
Connectivity options include wireless, Ethernet, and PC network.
Report formatting, printing, and high-frequency ventilation testing capabilities.
Data logging functionality.

Performance Specifications:

Main Functions: Includes bidirectional flow sensors for various measurements such as tidal volume, minute volume, peak flow, and ventilation pressure.
Options: 10 Bar Pressure Extension, O2 Measurement, Multi-Gas Sensor (CO2, N2O, anesthetic agents).
Measuring Ranges & Accuracy:
- Ventilation pressure sensor: 0 - 10 kPa with ±1% accuracy.
- FlowSense high flow sensor: ±300 L/min with ±2% accuracy.
- FlowSense low flow sensor: ±12 L/min with ±2% accuracy.
- Differential pressure: Various ranges with ±0.5% accuracy.
- Ambient pressure: 60 - 115 kPa with ±1% accuracy.
- Temperature: 10 - 40 °C with ±1 °C accuracy.
- Humidity: 0 - 100% R.H. with ±3% R.H. accuracy.
- Breath Rate: 1 - 200 BrPM with varying accuracy.
- High pressure (option): 0 - 1 Mpa with ±1.5% accuracy.
- O2-concentration (option): 0 - 100% with ±1 Vol% accuracy.
- Multi-Gas Sensor (option): Various gases with specific accuracy ranges.

General Specifications:

Display: 7” TFT-LCD touch screen with color graphical waveforms.
Dimensions: 210 x 140 x 80 mm.
Weight: Approximately 1.4 kg.
Power Supply: 100 - 240 V, 50/60 Hz, with a Li-ion battery providing approximately 8 hours of operation.
Temperature Range: Operational range of 10 - 40 °C and storage range of -20 to 70 °C.

Note: All specifications are subject to change without notice.

Catalog excerpts

Ve n t i l a t o r Tes t S ys t e m Anaesthetic systems. With a small footprint, data analysis and waveforms are generated on‐board and displayed on its 7" touch screen display – no need to carry around a laptop. Features: ■ 7” capacitive widescreen display with LED backlight ■ Intuitive graphical operating interface for measuring devices ■ FlowSense bidirectional airﬂow sensor (±300 L/min or ±12 L/min) ■ Automatic ﬂow sensor detection ■ 2 measured curves displayed simultaneously ■ 11 numeric parameters displayed, freely conﬁgurable ■ Option: oxygen measurement ■ Option: anesthetic gas measurement, IRMA AX+ ■ User conﬁgurable test setups ■ SD card or USB external memory ■ Wireless, Ethernet, and PC network connectivity ■ Report formatting and printing ■ High Frequency Ventilation testing ■ Data logging Accur acy M att er s • www.datr end.com venTestTM is designed to accurat

Open the catalog to page 1

Main Functions All specifications subject to change without notice. 130 - 4020 Viking Way, Richmond BC, Canada V6V 2L4 DATREND

Open the catalog to page 2

All Datrend Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list