MC DecJet® 400

Product catalog summary

Overview
The MC DecJet® 400 is a production-scale micronizing unit designed for handling up to 300 kg per hour. It is recognized as one of the most advanced jet mills available, offering high efficiency and scalability across various product ranges.

Technical Features

Constructed from high-grade materials such as AISI type 316L stainless steel or Hastelloy, with a mirror-polished finish to RA 0.25 microns.
Features rapid cleaning and easy validation due to its simple assembly and disassembly process, with a limited number of components.
Design includes no screws, using tri-clover connections instead, ensuring smooth surfaces and no crevices.
Achieves very low production loss with typical yields of 99.5% of batch size, minimizing blow-back and caking of sticky powders.

Advantages

Lowest process gas consumption among similarly sized units.
Operates at a constant temperature without heat generation, maintaining consistent Particle Size Distribution (PSD) during scale-up.

Options and Customizations

Available with volumetric or gravimetric pharma execution feeders and various hopper dimensions.
Configurable in top or bottom discharge setups, with special internal linings available.
Includes sanitary rotary valve, CIP and SIP systems, explosion-proof systems, and full automation via PLC with batch reporting.
Integration of PAT technology for in-line particle size analysis, with hazardous area versions compliant with US and ATEX standards.

Alternative Versions
Simplified versions based on the pharma concept can be customized for applications in fine chemicals, cosmetics, and food industries.

Technical Data

Nominal diameter: 400 mm (16 inches)
Estimated capacity: 10 kg - 300 kg/h
Batch size: 10 kg - 3000 kg
Process gas consumption at 7 bar: 6.99 Nm3/min (246.85 CFM)
Process gas consumption at 12 bar: 11.98 Nm3/min (423.07 CFM)
Installed power: 1.5 kW (2 HP)

Catalog excerpts

Micronizing Micronizing MC DecJet®30 MC DecJet 400 Production Scale Research & Development · Hundreds of installations worldwide · ost advanced jet mill on the market M · ffective with more products than any E other jet mill available today · ighly efficient H · ingle pass technology S · Handles sticky, abrasive and very hard products · Scalable product range · Easy to clean, absence of screws · Accurate reproduction from development

Open the catalog to page 1

Micronizing MC DecJet® 400 Production Scale The MC DecJet® 400 is a production scale unit, suitable for micronizing up to 300 kg per hour. Technical features High grade materials AISI type 316L stainless steel mirror polished to RA 0.25 microns or Hastelloy Rapid cleaning and easy validation Ease and quickness in assembling and disassembling, as well as a limited number of components The simplicity of the whole unit Total absence of screws (replaced by triclover connections), no crevices, smooth and regular surfaces Very low production loss - Typical yields are 99.5 % of batch size, no blow-back...

Open the catalog to page 2

All Dec Group catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list