DEKO D32
12Pages

Meeting the standards The DEKO D-32 is designed and constructed to exceed the standard performance and design requirements stated in ISO/DIS 15883-1 Washer-disinfectors - Part 1: General requirements and in Part 2: Requirements and tests for surgical instruments, anaesthetic and respiratory equipment, hollowware, utensils, glassware etc., as well as, the Safety requirements stated in IEC 61010-2-45: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields. Process results are guaranteed throughout: • water pressure for washing is...

Quality at a glance The DEKO D32’s compact dimensions are based on thorough ergonomic research and practical studies. With the working height of the doors, all controls at eye level and flexible usage of the wash chamber with individually removable shelves make the D32 simple and comfortable to work with. With the horizontally front-opening door, separate transfer conveyors can be avoided and the loading and unloading is made easier safer and more hygienic. Any residual fluid dripping from the load is collected on the inner door surface, which is washed and decontaminated during each...

Tracking and verifying data for your Q.A Systems In order to guarantee that the values of the critical process variables were truly obtained and as programmed, the D32 is equipped with the highest level - Class C - independent, full process verification recording system. The critical process values i.e. temperatures, times, pressures, detergent dosage time, flow & volume, errors, as well as descriptive cycle data can be independently recorded by three different means for your Quality Assurance System. Integration of the latest Information technology allows you to review the operation...

Safe and secure The most advanced electronic control system allows setting up practically an unlimited number of tailored programs. If required, there is an option of 12 listed cycles available at the touch of a button. Process parameters are protected by special codes and a number of tested and approved cycles can only be altered by the manufacturer. Use of the machine solely by authorised and trained personnel is facilitated by a 3-level access code system. Accurate instrumentation and the fast processor secure that the circumstances in the process are held within the pre-set limits in...

Summary of features • overall dim. W800xD725xH1970 mm • usable wash chamber dim. W600xD610xH600 mm • electricity 230/400V 3N 50Hz (or 60Hz), max 12.8 kW, 3 x 25A. Other voltages as required. • powerful circulation water pump, output 800L/min • framework, panels and wash chamber all made of stainless steel. No mild steel or galvanized steel frame constructions. • interlocking opening doors provided with gas springs and electrical motor driven safety locks • fully automatic microprocessor control including back-up batteries for a full memory protection • VGA-TFT 6.5“ touch-screen colour...

Technical Data Model Outer dimensions mm: Width Depth Height Weight kgs Usable chamber volume L Usable inner dimensions mm: Chamber height Chamber width Chamber depth Wash levels Usable height / level, mm Wash arms max. Basket capacity: SPRI basket 1/2, 340x250x70 mm max. DIN 480x255x50 mm max. DIN 240x225x50 mm max. DIN 120x255x50 mm max. EURO 600x300x70 mm max. EURO 300x300x70 mm max. EURO 150x150x70 mm max. Water filling volumes L/one phase: Rinse Wash Disinfection Electricity 230/400 V 3N 50 Hz, E-models 230/400 V 3N 50 Hz, D-models 115-127/208-220 V 3N 50/60 Hz, E-models D-models...

Overall dimensions and mass Pw) Pure woter connection mole R3/4" @) Cold woter connection femole R1/2" @) Hot water connection female R1/2" ^ No cables or pipes allowed (?) Drain connection (c) Condensate connection mole R1/2" (5) Steom connection mole R1/2" Pure woter connection male R3/4" @) Cold water connection female R1/2" @> Hot woter connection femole R1/2" ^ No cables or pipes allowed Outer dimensions: Loading height above floor Lh 850 mm Chamber dimensions: Chamber volume Weight with drying unit Weight without drying unit Floor loading Utility connection locations, electric and...

Installation of pass-through models - Width of wall opening is nx800 mm + 40 mm - Wall opening for pass-through model, side by side installation - Please check the width by a multible installation from the supplier. Wall opening

Franke Finland Oy Vartiokuja 1 FIN-76850 Naarajärvi Finland