PRODUCT CATALOGUE

BWS® Implant Surface 4 FTZ Implant line (Cylindrical / Conical) 5 Drills - Reading depth notches and sharp drills 7 Drill Stop - Stop insertion and removal procedure 8 Recommended surgical sequence and drill speed 9 Implant Drivers - Implants insertion procedure 11 Components for cemented/screwed prosthesis 12 Components for MUA screwed prosthesis 13 Prosthetic components for digital flow 14 Prosthetic components for digital flow - Connection on MUA 17 Overdenture prosthetic components 18 Dynamometric ratchet cleaning and maintenance 20 Spare Screws Available 21 Preliminary indications for surgical...

SANDBLASTING AND ACID ETCHING Sandblasting and etching processes of the implant surface allow to obtain optimal roughness values that make the adhesion of fibrin to the surface more tenacious and facilitate the bone healing process, significantly reducing the time. FIBRIN ADHERENCE The capacity of BWS® to retain fibrin, lets osteoblasts migrate from the bone to the implant surface and reproduce there, generating new bone in direct contact with the titanium (contact Osseointegration). THE IMPLEMENTED PROTOCOL PROVIDES VERIFICATION OF EACH BATCH OF PRODUCTION After the surface treatment and the...

Implant Line FTZ Cylindrical / Conical Universal connection Internal hex connection MICRO-GROOVES Micro-grooves to limit bone resorption. The implant’s screwing axis can be adjusted. BETTER PENETRATION Spiral profile with hybrid progress: flat and radiating towards the root, trianglar-shaped externally, for greater penetration into incompletely prepared sites. APICAL With helicoidal progress to enhance stable penetration.

DIAMETER - Ø 3.75 mm Cover screw included Color Code Warning! All DRP drills are 0.8 mm longer than the implant. In the planning stage and while drilling in proximity to vital anatomical structures, this added length must be considered. radio-checked Optional Indication of surgical position Recommended surgical sequence Cover screw included Color Code Warning! All DRP drills are 0.8 mm longer than the implant. In the planning stage and while drilling in proximity to vital anatomical structures, this added length must be considered. radio-checked Optional Indication of surgical position Recommended...

DIAMETER - Ø 4.75 mm Cover screw included Color Code prosthetic surgical Warning! All DRP drills are 0.8 mm longer than the implant. In the planning stage and while drilling in proximity to vital anatomical structures, this added length must be considered. radio-checked Optional Indication of surgical position Recommended surgical sequence Drills - Reading depth notches and sharp drills Lance drill - Parallel drills - Countersink - Tappers Lance drill Parallel drills The colored rings identify the diameter of the surgical line

Drill Stop Parallel drill L 23 mm Material: Inox Material: Inox Drill Stop - Stop insertion and removal procedure STOP insertion Hold the drill on the stalk side and insert the stop, with the retentions facing the drill, until the point of contact with the metallic stop located on the drill itself. (Fig. STOP removal Hold the stop and remove the drill by pulling on the stalk side. Depth STOP for different lengths. » Optimal check-depth during preparation of the surgical site, even in conditions of poor visibility of the operating field; » Reduction of surgical risk; » Reduction of operator stress;...

checkmark checkmark checkmark checkmark checkmark checkmark checkmark checkmark LEGEND REQUIRED checkmark OPTIONAL radio-checked Warning ! In the table “Recommended surgical sequence and drill speed” parameters should be considered as general indications; the clinical evaluation should always be subjected to careful analysis by the practitioner in each specific case. Based on the clinical features and bone consistency detected at the time of implant surgery, the choice of the available instrumentation will be made by the practitioner. Tappers may be used at the operator's discretion, based on...

Implant Drivers Implant CA connection - Implant ratchet connection Hexagonal implant reference Hexagonal head for ratchet Hexagonal implant reference Depth notches for flapless technique Depth notches for flapless technique 6 mm 4 mm 2 mm Implant ratchet connection Allows removal of the implant from the ampoule and its insertion in the surgical site using the contra-angle implant driver. Material: Inox A tool to be connected to the ratchet to complete insertion of the implant. Material: Inox

With manual implant driver Insert the implant driver connected to the handwheel into the implant making a slight rotation to allow good matching of the two geometric figures (implant - driver) and remove the implant (Fig. 6). Begin insertion of the implant in the alveolar surgical site using the manual implant driver. Where bone density permits, it is possible complete insertion of the implant using the manual wrenches (Fig. 7). To remove, exercise a slight lateral movement, right and left, in order to free the matching (Fig. 7). Insert the direct contra-angle implant driver into the implant...

Components for cemented/screwed prosthesis Parallel healing abutment Material: Ti5 H Taper healing abutment Material: Ti5 H Open tray impression coping Material: Ti5 Fastening screw included REF 05.010/VF Taper large healing abutment Material: Ti5 H Closed tray impression coping Material: Ti5 Fastening screw included REF 020237/VF Taper Large Implant analog Material: Ti5 Fastening screw included REF 020022 Straight abutment Material: Ti5 Straight abutment Material: Ti5 Overcast abutment Material: CRCO Straight abutment Material: Ti5 Package 10 pcs. Ø Castable abutment Material: Pmma Cylinder...

MUA protection cap Material: Ti5 Package 2 pcs. Fastening screw included REF VPCEM Material: Ti5 Supplied with transfer handle Supplied with transport and parallelization screw Fastening screw included REF 020510/VF MUA precision transfer Material: Ti5 Fastening screw included REF VFTEM Fastening screw included REF VPCEM MUA castable Material: Pmma Fastening screw included REF VPCEM