*mymedicalexpo

SHINING BOX

Product catalog summary

Technical Specifications
The SHINING BOX is a polishing unit designed for dental applications. It measures 750 mm in width, 500 mm in depth, and 550 mm in height, with a net weight of 57 kg and a gross weight of 84 kg. It operates on a mains voltage of 230 V AC at 50/60 Hz, with an absorption of 650 W and a suction power of 500 mc/h. The noise level is below 70 dBA, and it accommodates tool diameters ranging from 5.0 mm to 11.0 mm.

Demolition and Waste Disposal
The unit is classified as an electric and electronic device (AEE) and must be disposed of separately according to Directive 2002/96/EEC.

Description
The SHINING BOX is a cabinet for grinding and polishing metals used in dentistry, featuring a dual-speed motor (1,400 rpm and 2,800 rpm) for different polishing needs. It includes safety features like an electromagnetic switch and requires the use of personal protective equipment.

Technical Reference Regulations and Test Procedures
The unit complies with the 89/392 EEC Community Directive on machinery. It undergoes various tests, including dielectric strength, protection conductor, insulation resistance, and short circuit tests.

General Precautions
Users must read the manual thoroughly and ensure regular maintenance. Unauthorized repairs and modifications to safety mechanisms are prohibited. Only non-toxic and non-flammable cleaning products should be used.

Installation Instructions
The unit should be placed on a stable bench and connected to a 220 V AC - 50 Hz socket. Proper safety measures must be taken to avoid inhaling toxic dust and handling rotating parts.

Instructions for Use
Users should switch on the machine, select the appropriate speed, and carefully approach the rotating tool. After use, the machine should be turned off properly.

Maintenance
Before maintenance, disconnect the machine from the power source. Regularly check and replace worn-out instruments and filters to ensure optimal performance.

Catalog excerpts

9. TECHNICAL SPECIFICATIONS Description Width Depth at the base Height Net and gross weight Mains voltage Operating voltage Absorption Suction power Noise level Tool min diameter hole Tool max diameter hole POLISHING UNIT WITH EXTRACTOR SHINING BOX USER AND MAINTENANCE MANUAL 10. DEMOLITION AND WASTE DISPOSAL According to International regulations, this unit has been classified as AEE (electric and electronic device, whose correct operation depends on electric currents and electromagnetic fields) and as a consequence, at the end of its lifetime, it can not be treated as normal waste material but it must be disposed separately, complying with the Directive 2002/96/EEC C.I.E. DENTALFARM s.r.l. Via Susa, 9/a - 10138 TORINO - ITALY TECHNICAL-COMMERCIAL SERVICE - (+39) [email protected] Website: www.dentalfarm.it E-ma

Open the catalog to page 1

8. EXPLODED DRAWING AND SPARE-PART LIST SHINING BOX (A5250) SHINING BOX is a complete cabinet developed for the grinding and polishing operations under full safety conditions on metals currently used in the dental field. The hood has been designed and built with the aim to protect the User against any projection of fluids and dust particles and to extract and filter the residues. The polishing motor has been expressly studied with dual speed feature to provide for different working conditions: the first at low-medium speed (1.400 rpm) to assure a proper extraction without overheating the surfaces...

Open the catalog to page 2

7. POLISHING UNIT WIRING DIAGRAM Description Speed change-over switch Safety relay 230v 50/60Hz 500W Motor Motor start-up condenser Warning light 5Amp fuse Antijamming filter Tool compartment Upper protection on filtering area Filtering bag Suction motor Rear panel Lamp protection Stainless steel locking element 18W Neon lamp Fix metallic protection Adjustable, transparent splash-guard Polishing motor Plastic tank Control panel Tool drawer Housing

Open the catalog to page 3

Installation of this unit is quite simple but must be carried out very carefully in order to avoid any error suceptible to cause problems during operation, inconveniences and even damages. 1. Place the unit on a suitable and sturdy working bench, in a stable position 2. The unit is supplied without the mains plug, therefore it will be necessary to provide a suitable plug compatible with the absorption and connect the feeding cable to an approved ground socket 220v AC - 50Hz We remind that during operation, toxic dust particles are originated which must in no way be inhaled or disposed as normal...

Open the catalog to page 4

All Dentalfarm Srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list